|
Registro Completo |
|
Biblioteca(s): |
Embrapa Agroindústria Tropical. |
|
Data corrente: |
15/05/2025 |
|
Data da última atualização: |
15/05/2025 |
|
Tipo da produção científica: |
Artigo em Periódico Indexado |
|
Autoria: |
LUZ, E. P. C. G.; SOARES, A. L. DE B.; MATTOS, A. L. A.; ANDRADE, F. K.; CASTRO-SILVA, I. I.; ROSA, M. de F.; VIEIRA, R. S. |
|
Afiliação: |
ERIKA PATRÍCIA CHAGAS GOMES LUZ, FEDERAL UNIVERSITY OF CEARÁ; ANA LORENA DE BRITO SOARES, FEDERAL UNIVERSITY OF CEARÁ; ADRIANO LINCOLN ALBUQUERQUE MATTOS, CNPAT; FABIA KARINE ANDRADE, FEDERAL UNIVERSITY OF CEARÁ; IGOR IUCO CASTRO-SILVA, FEDERAL UNIVERSITY OF CEARÁ; MORSYLEIDE DE FREITAS ROSA, CNPAT; RODRIGO SILVEIRA VIEIRA, FEDERAL UNIVERSITY OF CEARÁ. |
|
Título: |
Development and evaluation of 3D printing inks based on bacterial ellulose/alginate functionalized with sodium alendronate or strontium apatite. |
|
Ano de publicação: |
2025 |
|
Fonte/Imprenta: |
Materials Today Communications, 44, 111965, 2025. |
|
DOI: |
https://doi.org/10.1016/j.mtcomm.2025.111965 |
|
Idioma: |
Inglês |
|
Conteúdo: |
This study aimed to develop hydrogels with optimized parameters for use in 3D printing, utilizing deconstructed bacterial cellulose (BC) and alginate (ALG) as the polymeric base. The hydrogels were further functionalized with active components: graphene anchored with silver (for antimicrobial activity) combined with sodium alendro- nate (a bone resorption inhibitor), or strontium apatite (which both inhibits bone resorption and stimulates bone formation). These formulations resulted in two types of hydrogels, GrafBone (GB) and ApatiteBone (AB). The rheological properties of the hydrogels were characterized to determine their flow behavior and gelation char- acteristics. The hydrogels were printed, and the resulting structures were analyzed regarding swelling capacity, morphology and chemical composition. The following properties were evaluated to assess their mechanical, antimicrobial, cytotoxicity and biological safety properties. The evaluation of the hydrogels revealed that both formulations, GrafBone and ApatiteBone, are printable, meaning they maintain their structural integrity after the printing process. ApatiteBone hydrogel exhibited greater resilience during extrusion compared to GrafBone. Regarding the mechanical properties of the printed scaffolds, GrafBone produced scaffolds with superior me- chanical strength, since the presence of graphene significantly enhanced the material ’ s resistance. GrafBone showed highest bactericidal inhibition capacity, due to the incorporation of GO-Ag nanocomposites. Both hydrogels were no toxicity over time using Artemia salina. The composite hydrogels are promising for medical applications, particularly bone tissue regeneration. Their ability to be customized with active ingredients that support bone formation and resorption and their high biocompatibility make them a valuable option for creating scaffolds that promote cell growth and tissue repair. MenosThis study aimed to develop hydrogels with optimized parameters for use in 3D printing, utilizing deconstructed bacterial cellulose (BC) and alginate (ALG) as the polymeric base. The hydrogels were further functionalized with active components: graphene anchored with silver (for antimicrobial activity) combined with sodium alendro- nate (a bone resorption inhibitor), or strontium apatite (which both inhibits bone resorption and stimulates bone formation). These formulations resulted in two types of hydrogels, GrafBone (GB) and ApatiteBone (AB). The rheological properties of the hydrogels were characterized to determine their flow behavior and gelation char- acteristics. The hydrogels were printed, and the resulting structures were analyzed regarding swelling capacity, morphology and chemical composition. The following properties were evaluated to assess their mechanical, antimicrobial, cytotoxicity and biological safety properties. The evaluation of the hydrogels revealed that both formulations, GrafBone and ApatiteBone, are printable, meaning they maintain their structural integrity after the printing process. ApatiteBone hydrogel exhibited greater resilience during extrusion compared to GrafBone. Regarding the mechanical properties of the printed scaffolds, GrafBone produced scaffolds with superior me- chanical strength, since the presence of graphene significantly enhanced the material ’ s resistance. GrafBone showed highest bactericidal inhibition capacity, due to the in... Mostrar Tudo |
|
Palavras-Chave: |
3D printing; Alendronate; Alendronato; Bone regeneration; Grafeno; Impressão 3D; Inks; Regeneração óssea. |
|
Thesagro: |
Estrôncio. |
|
Thesaurus Nal: |
Graphene; Strontium. |
|
Categoria do assunto: |
-- |
|
Marc: |
LEADER 02943naa a2200337 a 4500
001 2175662
005 2025-05-15
008 2025 bl uuuu u00u1 u #d
024 7 $ahttps://doi.org/10.1016/j.mtcomm.2025.111965$2DOI
100 1 $aLUZ, E. P. C. G.
245 $aDevelopment and evaluation of 3D printing inks based on bacterial ellulose/alginate functionalized with sodium alendronate or strontium apatite.$h[electronic resource]
260 $c2025
520 $aThis study aimed to develop hydrogels with optimized parameters for use in 3D printing, utilizing deconstructed bacterial cellulose (BC) and alginate (ALG) as the polymeric base. The hydrogels were further functionalized with active components: graphene anchored with silver (for antimicrobial activity) combined with sodium alendro- nate (a bone resorption inhibitor), or strontium apatite (which both inhibits bone resorption and stimulates bone formation). These formulations resulted in two types of hydrogels, GrafBone (GB) and ApatiteBone (AB). The rheological properties of the hydrogels were characterized to determine their flow behavior and gelation char- acteristics. The hydrogels were printed, and the resulting structures were analyzed regarding swelling capacity, morphology and chemical composition. The following properties were evaluated to assess their mechanical, antimicrobial, cytotoxicity and biological safety properties. The evaluation of the hydrogels revealed that both formulations, GrafBone and ApatiteBone, are printable, meaning they maintain their structural integrity after the printing process. ApatiteBone hydrogel exhibited greater resilience during extrusion compared to GrafBone. Regarding the mechanical properties of the printed scaffolds, GrafBone produced scaffolds with superior me- chanical strength, since the presence of graphene significantly enhanced the material ’ s resistance. GrafBone showed highest bactericidal inhibition capacity, due to the incorporation of GO-Ag nanocomposites. Both hydrogels were no toxicity over time using Artemia salina. The composite hydrogels are promising for medical applications, particularly bone tissue regeneration. Their ability to be customized with active ingredients that support bone formation and resorption and their high biocompatibility make them a valuable option for creating scaffolds that promote cell growth and tissue repair.
650 $aGraphene
650 $aStrontium
650 $aEstrôncio
653 $a3D printing
653 $aAlendronate
653 $aAlendronato
653 $aBone regeneration
653 $aGrafeno
653 $aImpressão 3D
653 $aInks
653 $aRegeneração óssea
700 1 $aSOARES, A. L. DE B.
700 1 $aMATTOS, A. L. A.
700 1 $aANDRADE, F. K.
700 1 $aCASTRO-SILVA, I. I.
700 1 $aROSA, M. de F.
700 1 $aVIEIRA, R. S.
773 $tMaterials Today Communications, 44, 111965, 2025.
Download
Esconder MarcMostrar Marc Completo |
|
Registro original: |
Embrapa Agroindústria Tropical (CNPAT) |
|
