|
|
Registro Completo |
Biblioteca(s): |
Embrapa Gado de Leite. |
Data corrente: |
11/01/2018 |
Data da última atualização: |
12/05/2023 |
Tipo da produção científica: |
Artigo em Periódico Indexado |
Autoria: |
SANTOS, R. D. dos; BOOTE, K. J.; SOLLENBERGER, L. E.; NEVES, A. L. A.; PEREIRA, L. G. R.; SCHERER, C. B.; GINÇALVES, L. C. |
Afiliação: |
RAFAEL DANTAS DOS SANTOS, CPATSA; KENNETH J. BOOTE, University of Florida, Gainesville, FL; LYNN E. SOLLENBERGER, University of Florida, Gainesville, FL; ANDRE LUIS ALVES NEVES, CNPGL; LUIZ GUSTAVO RIBEIRO PEREIRA, CNPGL; CAROLINA B. SCHERER, UFMG; LUCIO C. GONÇALVES, UFMG. |
Título: |
Simulated optimum sowing date for forage pearl millet cultivars in multilocation trials in Brazilian Semi-Arid region. |
Ano de publicação: |
2017 |
Fonte/Imprenta: |
Frontiers in Plant Science, v. 8, article 2074, 2017. |
DOI: |
10.3389/fpls.2017.02074 |
Idioma: |
Inglês |
Conteúdo: |
Forage production is primarily limited by weather conditions under dryland production systems in Brazilian semi-arid regions, therefore sowing at the appropriate time is critical. The objectives of this study were to evaluate the CSM-CERES-Pearl Millet model from the DSSAT software suite for its ability to simulate growth, development, and forage accumulation of pearl millet [Pennisetum glaucum (L.) R.] at three Brazilian semi-arid locations, and to use the model to study the impact of different sowing dates on pearl millet performance for forage. Four pearl millet cultivars were grown during the 2011 rainy season in field experiments conducted at three Brazilian semi-arid locations, under rainfed conditions. The genetic coefficients of the four pearl millet cultivars were calibrated for the model, and the model performance was evaluated with experimental data. The model was run for 14 sowing dates using long-term historical weather data from three locations, to determine the optimum sowing window. Results showed that performance of the model was satisfactory as indicated by accurate simulation of crop phenology and forage accumulation against measured data. The optimum sowing window varied among locations depending on rainfall patterns, although showing the same trend for cultivars within the site. The best sowing windows were from 15 April to 15 May for the Bom Conselho location; 12 April to 02 May for Nossa Senhora da Gloria; and 17 April to 25 May for Sao Bento do Una. The model can be used as a tool to evaluate the effect of sowing date on forage pearl millet performance in Brazilian semi-arid conditions. MenosForage production is primarily limited by weather conditions under dryland production systems in Brazilian semi-arid regions, therefore sowing at the appropriate time is critical. The objectives of this study were to evaluate the CSM-CERES-Pearl Millet model from the DSSAT software suite for its ability to simulate growth, development, and forage accumulation of pearl millet [Pennisetum glaucum (L.) R.] at three Brazilian semi-arid locations, and to use the model to study the impact of different sowing dates on pearl millet performance for forage. Four pearl millet cultivars were grown during the 2011 rainy season in field experiments conducted at three Brazilian semi-arid locations, under rainfed conditions. The genetic coefficients of the four pearl millet cultivars were calibrated for the model, and the model performance was evaluated with experimental data. The model was run for 14 sowing dates using long-term historical weather data from three locations, to determine the optimum sowing window. Results showed that performance of the model was satisfactory as indicated by accurate simulation of crop phenology and forage accumulation against measured data. The optimum sowing window varied among locations depending on rainfall patterns, although showing the same trend for cultivars within the site. The best sowing windows were from 15 April to 15 May for the Bom Conselho location; 12 April to 02 May for Nossa Senhora da Gloria; and 17 April to 25 May for Sao Bento do Una. T... Mostrar Tudo |
Palavras-Chave: |
CSM-CERES-Pearl Millet; Cultivars competition; Dry lands; DSSAT; Pasture; Rainfed agriculture. |
Thesagro: |
Forragem; Mudança climática; Pastagem. |
Thesaurus Nal: |
Climate change; Crop models. |
Categoria do assunto: |
L Ciência Animal e Produtos de Origem Animal |
URL: |
https://ainfo.cnptia.embrapa.br/digital/bitstream/doc/1085042/1/Simulated-optimum-sowing-date.pdf
|
Marc: |
LEADER 02630naa a2200337 a 4500 001 2085042 005 2023-05-12 008 2017 bl uuuu u00u1 u #d 024 7 $a10.3389/fpls.2017.02074$2DOI 100 1 $aSANTOS, R. D. dos 245 $aSimulated optimum sowing date for forage pearl millet cultivars in multilocation trials in Brazilian Semi-Arid region.$h[electronic resource] 260 $c2017 520 $aForage production is primarily limited by weather conditions under dryland production systems in Brazilian semi-arid regions, therefore sowing at the appropriate time is critical. The objectives of this study were to evaluate the CSM-CERES-Pearl Millet model from the DSSAT software suite for its ability to simulate growth, development, and forage accumulation of pearl millet [Pennisetum glaucum (L.) R.] at three Brazilian semi-arid locations, and to use the model to study the impact of different sowing dates on pearl millet performance for forage. Four pearl millet cultivars were grown during the 2011 rainy season in field experiments conducted at three Brazilian semi-arid locations, under rainfed conditions. The genetic coefficients of the four pearl millet cultivars were calibrated for the model, and the model performance was evaluated with experimental data. The model was run for 14 sowing dates using long-term historical weather data from three locations, to determine the optimum sowing window. Results showed that performance of the model was satisfactory as indicated by accurate simulation of crop phenology and forage accumulation against measured data. The optimum sowing window varied among locations depending on rainfall patterns, although showing the same trend for cultivars within the site. The best sowing windows were from 15 April to 15 May for the Bom Conselho location; 12 April to 02 May for Nossa Senhora da Gloria; and 17 April to 25 May for Sao Bento do Una. The model can be used as a tool to evaluate the effect of sowing date on forage pearl millet performance in Brazilian semi-arid conditions. 650 $aClimate change 650 $aCrop models 650 $aForragem 650 $aMudança climática 650 $aPastagem 653 $aCSM-CERES-Pearl Millet 653 $aCultivars competition 653 $aDry lands 653 $aDSSAT 653 $aPasture 653 $aRainfed agriculture 700 1 $aBOOTE, K. J. 700 1 $aSOLLENBERGER, L. E. 700 1 $aNEVES, A. L. A. 700 1 $aPEREIRA, L. G. R. 700 1 $aSCHERER, C. B. 700 1 $aGINÇALVES, L. C. 773 $tFrontiers in Plant Science$gv. 8, article 2074, 2017.
Download
Esconder MarcMostrar Marc Completo |
Registro original: |
Embrapa Gado de Leite (CNPGL) |
|
Biblioteca |
ID |
Origem |
Tipo/Formato |
Classificação |
Cutter |
Registro |
Volume |
Status |
URL |
Voltar
|
|
Registro Completo
Biblioteca(s): |
Embrapa Unidades Centrais. |
Data corrente: |
03/05/2005 |
Data da última atualização: |
16/08/2018 |
Autoria: |
TRANNIN, I. C. de B.; SIQUEIRA, J. O.; MOREIRA, F. M. de S. |
Afiliação: |
Isabel Cristina de Barros Trannin, Universidade Federal de Lavras - UFLA/Departamento de Ciência do Solo; José Oswaldo Siqueira, Universidade Federal de Lavras - UFLA/Departamento de Ciência do Solo; Fátima Maria de Souza Moreira, Universidade Federal de Lavras - UFLA/Departamento de Ciência do Solo. |
Título: |
Avaliação agronômica de um biossólido industrial para a cultura do milho. |
Ano de publicação: |
2005 |
Fonte/Imprenta: |
Pesquisa Agropecuária Brasileira, Brasília, DF, v. 40, n. 3, p. 261-269, mar. 2005 |
Idioma: |
Português |
Notas: |
Título em inglês: Agronomic assessment of an industrial biosolid for corn crop. |
Conteúdo: |
O objetivo deste trabalho foi avaliar a viabilidade agronômica de um biossólido industrial para a cultura do milho. O experimento foi realizado no campo, em um Cambissolo distrófico, nos anos agrícolas 1999/2000 e 2000/2001. A aplicação de 0, 6, 12, 18 e 24 Mg ha-1 de biossólido base seca, suplementado com K2O nos dois anos e 30% do P2O5 recomendado no segundo ano, foi comparada à adubação mineral completa. O biossólido melhorou a fertilidade do solo, o estado nutricional e a produtividade do milho, que apresentou resposta quadrática às doses aplicadas, atingindo a máxima de 9.992 kg ha-1 de grãos com 22,5 Mg ha-1 de biossólido, superando em 21% a adubação mineral e em 74% o controle. Mesmo na maior dose aplicada, os teores de nutrientes, Na e metais pesados no biossólido não causaram fitotoxicidade. A equivalência em produtividade à adubação mineral (7.895 kg ha-1) foi obtida com 10 Mg ha-1 de biossólido. Com base na equivalência ao NPK, o valor do biossólido foi estimado em R$ 43,70 Mg-1 base seca e R$ 8,74 Mg-1 base úmida. Considerando-se o custo de transporte, a aplicação deste biossólido é economicamente viável numa distância de até 66 km da fonte geradora. |
Palavras-Chave: |
agricultural recycling; corn nutrition; industrial residue; lodo de esgoto; nutrição do milho; reciclagem agrícola; residue economic value; valoração de resíduos. |
Thesagro: |
Fertilidade do Solo; Resíduo Industrial. |
Thesaurus NAL: |
sewage sludge; soil fertility. |
Categoria do assunto: |
-- |
URL: |
https://ainfo.cnptia.embrapa.br/digital/bitstream/item/107896/1/Avaliacao.pdf
|
Marc: |
LEADER 02196naa a2200301 a 4500 001 1113879 005 2018-08-16 008 2005 bl uuuu u00u1 u #d 100 1 $aTRANNIN, I. C. de B. 245 $aAvaliação agronômica de um biossólido industrial para a cultura do milho. 260 $c2005 500 $aTítulo em inglês: Agronomic assessment of an industrial biosolid for corn crop. 520 $aO objetivo deste trabalho foi avaliar a viabilidade agronômica de um biossólido industrial para a cultura do milho. O experimento foi realizado no campo, em um Cambissolo distrófico, nos anos agrícolas 1999/2000 e 2000/2001. A aplicação de 0, 6, 12, 18 e 24 Mg ha-1 de biossólido base seca, suplementado com K2O nos dois anos e 30% do P2O5 recomendado no segundo ano, foi comparada à adubação mineral completa. O biossólido melhorou a fertilidade do solo, o estado nutricional e a produtividade do milho, que apresentou resposta quadrática às doses aplicadas, atingindo a máxima de 9.992 kg ha-1 de grãos com 22,5 Mg ha-1 de biossólido, superando em 21% a adubação mineral e em 74% o controle. Mesmo na maior dose aplicada, os teores de nutrientes, Na e metais pesados no biossólido não causaram fitotoxicidade. A equivalência em produtividade à adubação mineral (7.895 kg ha-1) foi obtida com 10 Mg ha-1 de biossólido. Com base na equivalência ao NPK, o valor do biossólido foi estimado em R$ 43,70 Mg-1 base seca e R$ 8,74 Mg-1 base úmida. Considerando-se o custo de transporte, a aplicação deste biossólido é economicamente viável numa distância de até 66 km da fonte geradora. 650 $asewage sludge 650 $asoil fertility 650 $aFertilidade do Solo 650 $aResíduo Industrial 653 $aagricultural recycling 653 $acorn nutrition 653 $aindustrial residue 653 $alodo de esgoto 653 $anutrição do milho 653 $areciclagem agrícola 653 $aresidue economic value 653 $avaloração de resíduos 700 1 $aSIQUEIRA, J. O. 700 1 $aMOREIRA, F. M. de S. 773 $tPesquisa Agropecuária Brasileira, Brasília, DF$gv. 40, n. 3, p. 261-269, mar. 2005
Download
Esconder MarcMostrar Marc Completo |
Registro original: |
Embrapa Unidades Centrais (AI-SEDE) |
|
Biblioteca |
ID |
Origem |
Tipo/Formato |
Classificação |
Cutter |
Registro |
Volume |
Status |
Fechar
|
Nenhum registro encontrado para a expressão de busca informada. |
|
|