|
|
Registro Completo |
Biblioteca(s): |
Embrapa Florestas. |
Data corrente: |
13/10/2014 |
Data da última atualização: |
13/10/2014 |
Autoria: |
MARCON, A. K.; SILVA, A. C. da; HIGUCHI, P.; FERREIRA, T. de S.; MISSIO, F. de F.; SALAMI, B.; ROSA, A. D.; NEGRINI, M.; BENTO, M. A.; BUZZI JÚNIOR, F. |
Título: |
Variação florístico-estrutural em resposta à heterogeneidade ambiental em uma floresta nebular em Ububici, Planalto Catarinense. |
Ano de publicação: |
2014 |
Fonte/Imprenta: |
Scientia Forestalis, Piracicaba, v. 42, n. 103, p. 439-450, set. 2014. |
Idioma: |
Português |
Conteúdo: |
O presente estudo objetivou verificar se o componente arbóreo de uma Floresta Nebular, localizada em Urubici, SC, apresenta variações florísticas e estruturais associadas à heterogeneidade ambiental existente. Para caracterização da comunidade arbórea foram alocadas 25 parcelas de 20X20 m, onde os indivíduos arbóreos com CAP (circunferência a altura de 1,30 m do solo) ? 15,7 cm foram medidos (CAP e altura) e identificados. Em cada parcela, foram obtidas informações sobre as propriedades físicas e químicas do solo, relevo, compactação dos solos, cobertura do dossel e impacto ambiental. Os dados foram analisados por meio do teste de Mann-Whitney, análise de variância multivariada não-paramétrica (NPMANOVA), escalonamento multidimensional não-métrico (NMDS) e análise de espécies indicadoras. A partir da análise exploratória dos dados, verificou-se que a NMDS indicou a ocorrência de dois grupos florístico-estruturais, associados à declividade do solo. Assim, foram definidos dois setores com características ambientais distintas. O setor de menor declividade apresentou maiores valores de matéria orgânica, areia, alumínio e CTC, enquanto o setor de maior declividade apresentou maiores teores de silte e cálcio e maiores valores de saturação de bases e pH. A heterogeneidade ambiental influenciou a organização florístico-estrutural do componente arbóreo e a ocorrência de espécies indicadoras nos dois setores. As condições do meio físico, associadas às características edáficas e a declividade do terreno, condicionaram a organização espacial da comunidade no fragmento estudado. MenosO presente estudo objetivou verificar se o componente arbóreo de uma Floresta Nebular, localizada em Urubici, SC, apresenta variações florísticas e estruturais associadas à heterogeneidade ambiental existente. Para caracterização da comunidade arbórea foram alocadas 25 parcelas de 20X20 m, onde os indivíduos arbóreos com CAP (circunferência a altura de 1,30 m do solo) ? 15,7 cm foram medidos (CAP e altura) e identificados. Em cada parcela, foram obtidas informações sobre as propriedades físicas e químicas do solo, relevo, compactação dos solos, cobertura do dossel e impacto ambiental. Os dados foram analisados por meio do teste de Mann-Whitney, análise de variância multivariada não-paramétrica (NPMANOVA), escalonamento multidimensional não-métrico (NMDS) e análise de espécies indicadoras. A partir da análise exploratória dos dados, verificou-se que a NMDS indicou a ocorrência de dois grupos florístico-estruturais, associados à declividade do solo. Assim, foram definidos dois setores com características ambientais distintas. O setor de menor declividade apresentou maiores valores de matéria orgânica, areia, alumínio e CTC, enquanto o setor de maior declividade apresentou maiores teores de silte e cálcio e maiores valores de saturação de bases e pH. A heterogeneidade ambiental influenciou a organização florístico-estrutural do componente arbóreo e a ocorrência de espécies indicadoras nos dois setores. As condições do meio físico, associadas às características edáficas e a decl... Mostrar Tudo |
Palavras-Chave: |
Declividade; Declivity; Floresta Ombrófila Mista Alto-Montana; Highland Araucaria Forest; NMDS. |
Categoria do assunto: |
-- |
Marc: |
LEADER 02515naa a2200289 a 4500 001 1997225 005 2014-10-13 008 2014 bl uuuu u00u1 u #d 100 1 $aMARCON, A. K. 245 $aVariação florístico-estrutural em resposta à heterogeneidade ambiental em uma floresta nebular em Ububici, Planalto Catarinense. 260 $c2014 520 $aO presente estudo objetivou verificar se o componente arbóreo de uma Floresta Nebular, localizada em Urubici, SC, apresenta variações florísticas e estruturais associadas à heterogeneidade ambiental existente. Para caracterização da comunidade arbórea foram alocadas 25 parcelas de 20X20 m, onde os indivíduos arbóreos com CAP (circunferência a altura de 1,30 m do solo) ? 15,7 cm foram medidos (CAP e altura) e identificados. Em cada parcela, foram obtidas informações sobre as propriedades físicas e químicas do solo, relevo, compactação dos solos, cobertura do dossel e impacto ambiental. Os dados foram analisados por meio do teste de Mann-Whitney, análise de variância multivariada não-paramétrica (NPMANOVA), escalonamento multidimensional não-métrico (NMDS) e análise de espécies indicadoras. A partir da análise exploratória dos dados, verificou-se que a NMDS indicou a ocorrência de dois grupos florístico-estruturais, associados à declividade do solo. Assim, foram definidos dois setores com características ambientais distintas. O setor de menor declividade apresentou maiores valores de matéria orgânica, areia, alumínio e CTC, enquanto o setor de maior declividade apresentou maiores teores de silte e cálcio e maiores valores de saturação de bases e pH. A heterogeneidade ambiental influenciou a organização florístico-estrutural do componente arbóreo e a ocorrência de espécies indicadoras nos dois setores. As condições do meio físico, associadas às características edáficas e a declividade do terreno, condicionaram a organização espacial da comunidade no fragmento estudado. 653 $aDeclividade 653 $aDeclivity 653 $aFloresta Ombrófila Mista Alto-Montana 653 $aHighland Araucaria Forest 653 $aNMDS 700 1 $aSILVA, A. C. da 700 1 $aHIGUCHI, P. 700 1 $aFERREIRA, T. de S. 700 1 $aMISSIO, F. de F. 700 1 $aSALAMI, B. 700 1 $aROSA, A. D. 700 1 $aNEGRINI, M. 700 1 $aBENTO, M. A. 700 1 $aBUZZI JÚNIOR, F. 773 $tScientia Forestalis, Piracicaba$gv. 42, n. 103, p. 439-450, set. 2014.
Download
Esconder MarcMostrar Marc Completo |
Registro original: |
Embrapa Florestas (CNPF) |
|
Biblioteca |
ID |
Origem |
Tipo/Formato |
Classificação |
Cutter |
Registro |
Volume |
Status |
URL |
Voltar
|
|
![](/consulta/web/img/deny.png) | Acesso ao texto completo restrito à biblioteca da Embrapa Instrumentação. Para informações adicionais entre em contato com cnpdia.biblioteca@embrapa.br. |
Registro Completo
Biblioteca(s): |
Embrapa Instrumentação. |
Data corrente: |
11/08/2020 |
Data da última atualização: |
16/08/2022 |
Tipo da produção científica: |
Artigo em Periódico Indexado |
Circulação/Nível: |
B - 4 |
Autoria: |
SILVA, D. W.; SCATOLINO, M. V.; PEREIRA, T. G. T.; VILELA, A. P.; EUGENIO, T. M. C.; MARTINS, M. A.; MENDES, R. F.; BUFALINO, L.; TONOLI, G. H. D.; MENDES, L. M. |
Afiliação: |
MARIA ALICE MARTINS, CNPDIA. |
Título: |
Influence of thermal treatment of eucalyptus fibers on the physical-mechanical properties of extruded fiber-cement composites. |
Ano de publicação: |
2020 |
Fonte/Imprenta: |
Materials Today: Proceedings, v. 31, 2020. |
Páginas: |
S348-S352 |
ISSN: |
2214-7853 |
DOI: |
https://doi.org/10.1016/j.matpr.2020.04.764 |
Idioma: |
Inglês |
Conteúdo: |
This study proposes to evaluate the effect of the heat treatment in commercial eucalyptus fibers (produced by thermo-mechanical process) on the physical-mechanical properties of extruded fiber-cements composites. The fibers were treated with different temperatures of heat treatment (140, 170, 200 and 230 °C) for 60 min in a “Macro-ATG” oven. The chemical and morphological characteristics of the natural fibers were evaluated before and after the thermal treatment. The cementitious paste was composed by 67.9% cement, 29.1% limestone and 3% eucalyptus fibers. Hydroxypropylmethylcellulose (HPMC) and polyether carboxylic acid (ADVA 175) were added to the cement paste both in 1% (based on the cement mass) to facilitate the extrusion process. The thermal treatments at 200 and 230 °C were efficient in reducing the extractives content. On the other hand, a decrease in length, diameter and lumen size of the fibers has occurred. The decrease in extractives content did not influence the properties of water absorption, modulus of rupture (MOR) and modulus of elasticity (MOE). The increase in lignin content resulted in increase for apparent porosity and decrease of the toughness in reinforced fiber-cement produced with fibers treated at 200 and 230 °C. The application of the thermal treatment for the fibers did not show improvement in fiber-cement in the evaluated conditions. It is recommended to evaluate other properties of the fiber-cement reinforced with the mentioned treated fibers, such as natural and laboratorial weathering. MenosThis study proposes to evaluate the effect of the heat treatment in commercial eucalyptus fibers (produced by thermo-mechanical process) on the physical-mechanical properties of extruded fiber-cements composites. The fibers were treated with different temperatures of heat treatment (140, 170, 200 and 230 °C) for 60 min in a “Macro-ATG” oven. The chemical and morphological characteristics of the natural fibers were evaluated before and after the thermal treatment. The cementitious paste was composed by 67.9% cement, 29.1% limestone and 3% eucalyptus fibers. Hydroxypropylmethylcellulose (HPMC) and polyether carboxylic acid (ADVA 175) were added to the cement paste both in 1% (based on the cement mass) to facilitate the extrusion process. The thermal treatments at 200 and 230 °C were efficient in reducing the extractives content. On the other hand, a decrease in length, diameter and lumen size of the fibers has occurred. The decrease in extractives content did not influence the properties of water absorption, modulus of rupture (MOR) and modulus of elasticity (MOE). The increase in lignin content resulted in increase for apparent porosity and decrease of the toughness in reinforced fiber-cement produced with fibers treated at 200 and 230 °C. The application of the thermal treatment for the fibers did not show improvement in fiber-cement in the evaluated conditions. It is recommended to evaluate other properties of the fiber-cement reinforced with the mentioned treated fibers, s... Mostrar Tudo |
Palavras-Chave: |
Cementitious composites; Chemical characterization; Extruded process; Morphological characterization. |
Categoria do assunto: |
-- |
Marc: |
LEADER 02534naa a2200313 a 4500 001 2124283 005 2022-08-16 008 2020 bl uuuu u00u1 u #d 022 $a2214-7853 024 7 $ahttps://doi.org/10.1016/j.matpr.2020.04.764$2DOI 100 1 $aSILVA, D. W. 245 $aInfluence of thermal treatment of eucalyptus fibers on the physical-mechanical properties of extruded fiber-cement composites.$h[electronic resource] 260 $c2020 300 $aS348-S352 520 $aThis study proposes to evaluate the effect of the heat treatment in commercial eucalyptus fibers (produced by thermo-mechanical process) on the physical-mechanical properties of extruded fiber-cements composites. The fibers were treated with different temperatures of heat treatment (140, 170, 200 and 230 °C) for 60 min in a “Macro-ATG” oven. The chemical and morphological characteristics of the natural fibers were evaluated before and after the thermal treatment. The cementitious paste was composed by 67.9% cement, 29.1% limestone and 3% eucalyptus fibers. Hydroxypropylmethylcellulose (HPMC) and polyether carboxylic acid (ADVA 175) were added to the cement paste both in 1% (based on the cement mass) to facilitate the extrusion process. The thermal treatments at 200 and 230 °C were efficient in reducing the extractives content. On the other hand, a decrease in length, diameter and lumen size of the fibers has occurred. The decrease in extractives content did not influence the properties of water absorption, modulus of rupture (MOR) and modulus of elasticity (MOE). The increase in lignin content resulted in increase for apparent porosity and decrease of the toughness in reinforced fiber-cement produced with fibers treated at 200 and 230 °C. The application of the thermal treatment for the fibers did not show improvement in fiber-cement in the evaluated conditions. It is recommended to evaluate other properties of the fiber-cement reinforced with the mentioned treated fibers, such as natural and laboratorial weathering. 653 $aCementitious composites 653 $aChemical characterization 653 $aExtruded process 653 $aMorphological characterization 700 1 $aSCATOLINO, M. V. 700 1 $aPEREIRA, T. G. T. 700 1 $aVILELA, A. P. 700 1 $aEUGENIO, T. M. C. 700 1 $aMARTINS, M. A. 700 1 $aMENDES, R. F. 700 1 $aBUFALINO, L. 700 1 $aTONOLI, G. H. D. 700 1 $aMENDES, L. M. 773 $tMaterials Today: Proceedings$gv. 31, 2020.
Download
Esconder MarcMostrar Marc Completo |
Registro original: |
Embrapa Instrumentação (CNPDIA) |
|
Biblioteca |
ID |
Origem |
Tipo/Formato |
Classificação |
Cutter |
Registro |
Volume |
Status |
Fechar
|
Nenhum registro encontrado para a expressão de busca informada. |
|
|