| |
|
|
| Registros recuperados : 90 | |
| 3. |  | PAVINATTO, A.; MERCANTE, L. A.; CORREA, D. S. Filmes nanoestruturados contendo quitosana para aplicação como plataforma de biossensor eletroquímico. In: SIMPÓSIO NACIONAL DE INSTRUMENTAÇÃO AGROPECUÁRIA, 2014, São Carlos, SP Anais do SIAGRO: ciência, inovação e mercado 2014. São Carlos, SP: Embrapa Instrumentação, 2014. p. 411-414. Editores: Carlos Manoel Pedro Vaz, Débora Marcondes Bastos Pereira Milori, Silvio Crestana.| Biblioteca(s): Embrapa Instrumentação. |
|    |
| 4. | | PAVINATTO, A.; MERCANTE, L. A.; CORREA, D. S. Filmes nanoestruturados contendo quitosana para aplicação como plataforma sensorial. In: WORKSHOP DA REDE DE NANOTECNOLOGIA APLICADA AO AGRONEGÓCIO, 8, 2014, Juiz de fora. Anais... São Carlos: Embrapa Instrumentação; Campo Grande: Embrapa Gado de Corte; Juiz de Fora: Embrapa Gado de Leite, 2014. p. 40-42. Editores: Maria Alice Martins, Humberto de Mello Brandão, Marlene de Barros Coelho, Daniel Souza Corrêa, Caue Ribeiro, Luiz Henrique Capparelli Mattoso.| Biblioteca(s): Embrapa Instrumentação. |
| |
| 5. | | NOGUEIRA, M. S.; MERCANTE, L. A.; CORREA, D. S. Fabricação de filmes nanoestruturados baseados em nanocompósito/ polímero condutor para aplicação em sensores do tipo língua eletrônica. In: JORNADA CIENTÍFICA - EMBRAPA SÃO CARLOS, 6., 2014, São Carlos, SP Anais... São Carlos: Embrapa Instrumentação: Embrapa Pecuária Sudeste, 2014. p. 74. Editores técnicos: João de Mendonça Naime, Caue Ribeiro, Maria Alice Martins, Elaine Cristina Paris, Paulino Ribeiro Villas Boas, Ladislau Marcelino Rabello. (Embrapa Instrumentação. Documentos, 57).| Biblioteca(s): Embrapa Instrumentação. |
| |
| 12. | | CONTI, P. P.; ANDRE, R. S.; MERCANTE, L. A.; CORREA, D. S. Desenvolvimento de sensores híbridos compostos por dióxido de titânio e polímero condutor com potencial aplicação na análise de voláteis. In: SIMPÓSIO NACIONAL DE INSTRUMENTAÇÃO AGROPECUÁRIA, 4., 2019, São Carlos, SP. Ciência, inovação e mercado: anais. São Carlos, SP: Embrapa Instrumentação, 2019. Editores: Paulino Ribeiro Villas-Boas, Maria Alice Martins, Débora Marcondes Bastos Pereira Milori, Ladislau Martin Neto. SIAGRO 2019. 555-559| Biblioteca(s): Embrapa Instrumentação. |
| |
| Registros recuperados : 90 | |
|
|
|
 | Acesso ao texto completo restrito à biblioteca da Embrapa Instrumentação. Para informações adicionais entre em contato com cnpdia.biblioteca@embrapa.br. |
Registro Completo
|
Biblioteca(s): |
Embrapa Instrumentação. |
|
Data corrente: |
19/10/2021 |
|
Data da última atualização: |
09/06/2022 |
|
Tipo da produção científica: |
Artigo em Periódico Indexado |
|
Circulação/Nível: |
A - 1 |
|
Autoria: |
MERCANTE, L. A.; ANDRE, R. S.; FACURE, M. H. M.; FUGIKAWA-SANTOS, L.; CORREA, D. S. |
|
Afiliação: |
DANIEL SOUZA CORREA, CNPDIA. |
|
Título: |
Design of a bioelectronic tongue for glucose monitoring using zinc oxide nanofibers and graphene derivatives. |
|
Ano de publicação: |
2021 |
|
Fonte/Imprenta: |
Sensors and Actuators Reports, v. 3, 100050, 2021. |
|
ISSN: |
2666-0539 |
|
DOI: |
https://doi.org/10.1016/j.snr.2021.100050 |
|
Idioma: |
Inglês |
|
Conteúdo: |
Monitoring glucose levels is critical for diabetes management and might be a key step in the development of individualized treatment strategies. In this scenario, tracking salivary glucose has been recognized as a promising strategy due to its merits of ease sampling and non-invasive nature. In this paper, we report on the development of an electrical impedance-based biosensor array to distinguish glucose at different concentrations in saliva. The enzymatic biosensors were made of gold interdigitated electrodes coated with pristine electrospun zinc oxide nanofibers (NFZ) and NFZ combined with graphene-based nanomaterials (i.e., reduced graphene oxide - rGO and graphene quantum dots - GQDs), on which a layer of glucose oxidase (GOx) enzyme was adsorbed. Electrical impedance measurements indicate that the NFZ-GQDs@GOx and NFZ-rGO@GOx platforms presented good linear relationship with glucose concentration in the range of 0.1 to 6 mM. The highest sensitivity was reached for NFZ-rGO@GOx with a detection limit (LOD) of 14 μM, while the LOD was 32 μM for NFZ-GQDs@GOx. Both biosensors were also capable of detecting glucose in artificial saliva using aliquots of 10 μL, with recovery between 87.3 and 106.8%. Furthermore, the three sensing units (NFZ@GOx, NFZ-rGO@GOx and NFZ-GQDs@GOx) were employed to build a bioelectronic tongue. Using Principal Component Analysis (PCA) technique to project the electrical impedance data of all sensing units allowed the discrimination of the different glucose concentrations and interferents. This study reveals the applicability of the developed bioelectronic tongue as noninvasive glucose sensors, which approach could also be pottentially adapted to detect other disease biomarkers present in saliva MenosMonitoring glucose levels is critical for diabetes management and might be a key step in the development of individualized treatment strategies. In this scenario, tracking salivary glucose has been recognized as a promising strategy due to its merits of ease sampling and non-invasive nature. In this paper, we report on the development of an electrical impedance-based biosensor array to distinguish glucose at different concentrations in saliva. The enzymatic biosensors were made of gold interdigitated electrodes coated with pristine electrospun zinc oxide nanofibers (NFZ) and NFZ combined with graphene-based nanomaterials (i.e., reduced graphene oxide - rGO and graphene quantum dots - GQDs), on which a layer of glucose oxidase (GOx) enzyme was adsorbed. Electrical impedance measurements indicate that the NFZ-GQDs@GOx and NFZ-rGO@GOx platforms presented good linear relationship with glucose concentration in the range of 0.1 to 6 mM. The highest sensitivity was reached for NFZ-rGO@GOx with a detection limit (LOD) of 14 μM, while the LOD was 32 μM for NFZ-GQDs@GOx. Both biosensors were also capable of detecting glucose in artificial saliva using aliquots of 10 μL, with recovery between 87.3 and 106.8%. Furthermore, the three sensing units (NFZ@GOx, NFZ-rGO@GOx and NFZ-GQDs@GOx) were employed to build a bioelectronic tongue. Using Principal Component Analysis (PCA) technique to project the electrical impedance data of all sensing units allowed the discrimination of the different ... Mostrar Tudo |
|
Palavras-Chave: |
Electrospinning; Electrospinning Electrospun nanofibers; Reduced graphene oxide. |
|
Categoria do assunto: |
-- |
|
Marc: |
LEADER 02503naa a2200229 a 4500
001 2135416
005 2022-06-09
008 2021 bl uuuu u00u1 u #d
022 $a2666-0539
024 7 $ahttps://doi.org/10.1016/j.snr.2021.100050$2DOI
100 1 $aMERCANTE, L. A.
245 $aDesign of a bioelectronic tongue for glucose monitoring using zinc oxide nanofibers and graphene derivatives.$h[electronic resource]
260 $c2021
520 $aMonitoring glucose levels is critical for diabetes management and might be a key step in the development of individualized treatment strategies. In this scenario, tracking salivary glucose has been recognized as a promising strategy due to its merits of ease sampling and non-invasive nature. In this paper, we report on the development of an electrical impedance-based biosensor array to distinguish glucose at different concentrations in saliva. The enzymatic biosensors were made of gold interdigitated electrodes coated with pristine electrospun zinc oxide nanofibers (NFZ) and NFZ combined with graphene-based nanomaterials (i.e., reduced graphene oxide - rGO and graphene quantum dots - GQDs), on which a layer of glucose oxidase (GOx) enzyme was adsorbed. Electrical impedance measurements indicate that the NFZ-GQDs@GOx and NFZ-rGO@GOx platforms presented good linear relationship with glucose concentration in the range of 0.1 to 6 mM. The highest sensitivity was reached for NFZ-rGO@GOx with a detection limit (LOD) of 14 μM, while the LOD was 32 μM for NFZ-GQDs@GOx. Both biosensors were also capable of detecting glucose in artificial saliva using aliquots of 10 μL, with recovery between 87.3 and 106.8%. Furthermore, the three sensing units (NFZ@GOx, NFZ-rGO@GOx and NFZ-GQDs@GOx) were employed to build a bioelectronic tongue. Using Principal Component Analysis (PCA) technique to project the electrical impedance data of all sensing units allowed the discrimination of the different glucose concentrations and interferents. This study reveals the applicability of the developed bioelectronic tongue as noninvasive glucose sensors, which approach could also be pottentially adapted to detect other disease biomarkers present in saliva
653 $aElectrospinning
653 $aElectrospinning Electrospun nanofibers
653 $aReduced graphene oxide
700 1 $aANDRE, R. S.
700 1 $aFACURE, M. H. M.
700 1 $aFUGIKAWA-SANTOS, L.
700 1 $aCORREA, D. S.
773 $tSensors and Actuators Reports$gv. 3, 100050, 2021.
Download
Esconder MarcMostrar Marc Completo |
|
Registro original: |
Embrapa Instrumentação (CNPDIA) |
|
|
Biblioteca |
ID |
Origem |
Tipo/Formato |
Classificação |
Cutter |
Registro |
Volume |
Status |
Fechar
|
| Nenhum registro encontrado para a expressão de busca informada. |
|
|
