|
|
Registro Completo |
Biblioteca(s): |
Embrapa Instrumentação. |
Data corrente: |
22/12/1999 |
Data da última atualização: |
23/02/2012 |
Autoria: |
MATTOSO, L. H. C.; OLIVEIRA JUNIOR, O. N.; FERREIRA, M. |
Afiliação: |
EMBRAPA-CNPDIA; USP-IFSC. |
Título: |
Conducting polymers (for Langmuir-Blodgett film fabrication). |
Ano de publicação: |
1996 |
Fonte/Imprenta: |
In: SALAMONE, J.C. (Ed.). Polymeric materials encyclopedia. Boca Raton: CRC, 1996. |
Páginas: |
p. 1432-1439. |
Idioma: |
Inglês |
Conteúdo: |
There has been considerable excitement recently over the use of conducting polymers in a variety of technological applications. Some of the applications have already been commercialized, as in the case of rechargeable batteries, conductive textiles, and electrical display. Sophisticated long-term applications are also envisaged for these materials, including the fabrication of molecular electronics devices, that is, devices in which switching and memory phenomena would be controlled at the molecular level. Two main requiremos must be met to achieve such an ambitious goal. First development of the ability to construct structures whouse molecular architecture could be manipulated and appropriately designed. Such structures are most likely to consist of ultra-thin films. Two techniques are available for this purpose, namely the Langmuir-Blodgett (LB) method, which has been investigated extensively for several yearls, and the more recent Self Assembly (SA) technique for building multilayers. These techniques allow the fabrication of ultra-thim (of the order of nm) in the form of multilayers with a high degree of control of orientational order in the case of the LB films, The second requirement concerns the acess to individual molecules. Though substantial research must be carried out before this requirement can be met, the progesss reported in the use of atomic force microscopy (AFM) and scanning tunneling microscopy (STM) on molecular system is most encouraging. It is now possible to image monolayers of simple molecules on graphite and also to probe and manipulate individual molecules at surfaces. We are concerneed with the first of the above-mentioned aspects, focusing on the LB technique that has been exploited worldwide for fabricating ultra-thim films of a variety of materials, including conducting polymers. Because the formation of LB films requires the spreading of a monolayer onto an aqueous subphase, some prerequisites must be fulfilled by the material of interest. It must be soluble in a reasonably volatile organic solvent and also sufficiently surface for spreading to occur. The conducting polymers that were first investigated, namely polyacetylene, polypyrrole, polythiophene, and polyaniline, could not be processed in this manner, and therefore several atrategies were developed for overcoming this difficulty. An overview of these strategies will be provided below, following a brief introduction to LB films. Recent developments on the LB films from polyanilines will then be discussed, followed by a description of the most important properties and some of the possible appications that have been demonstrated for LB films of conducting polymers. MenosThere has been considerable excitement recently over the use of conducting polymers in a variety of technological applications. Some of the applications have already been commercialized, as in the case of rechargeable batteries, conductive textiles, and electrical display. Sophisticated long-term applications are also envisaged for these materials, including the fabrication of molecular electronics devices, that is, devices in which switching and memory phenomena would be controlled at the molecular level. Two main requiremos must be met to achieve such an ambitious goal. First development of the ability to construct structures whouse molecular architecture could be manipulated and appropriately designed. Such structures are most likely to consist of ultra-thin films. Two techniques are available for this purpose, namely the Langmuir-Blodgett (LB) method, which has been investigated extensively for several yearls, and the more recent Self Assembly (SA) technique for building multilayers. These techniques allow the fabrication of ultra-thim (of the order of nm) in the form of multilayers with a high degree of control of orientational order in the case of the LB films, The second requirement concerns the acess to individual molecules. Though substantial research must be carried out before this requirement can be met, the progesss reported in the use of atomic force microscopy (AFM) and scanning tunneling microscopy (STM) on molecular system is most encouraging. It is now possi... Mostrar Tudo |
Palavras-Chave: |
Polimeros. |
Categoria do assunto: |
-- |
Marc: |
LEADER 03192naa a2200169 a 4500 001 1027112 005 2012-02-23 008 1996 bl --- 0-- u #d 100 1 $aMATTOSO, L. H. C. 245 $aConducting polymers (for Langmuir-Blodgett film fabrication). 260 $c1996 300 $ap. 1432-1439. 520 $aThere has been considerable excitement recently over the use of conducting polymers in a variety of technological applications. Some of the applications have already been commercialized, as in the case of rechargeable batteries, conductive textiles, and electrical display. Sophisticated long-term applications are also envisaged for these materials, including the fabrication of molecular electronics devices, that is, devices in which switching and memory phenomena would be controlled at the molecular level. Two main requiremos must be met to achieve such an ambitious goal. First development of the ability to construct structures whouse molecular architecture could be manipulated and appropriately designed. Such structures are most likely to consist of ultra-thin films. Two techniques are available for this purpose, namely the Langmuir-Blodgett (LB) method, which has been investigated extensively for several yearls, and the more recent Self Assembly (SA) technique for building multilayers. These techniques allow the fabrication of ultra-thim (of the order of nm) in the form of multilayers with a high degree of control of orientational order in the case of the LB films, The second requirement concerns the acess to individual molecules. Though substantial research must be carried out before this requirement can be met, the progesss reported in the use of atomic force microscopy (AFM) and scanning tunneling microscopy (STM) on molecular system is most encouraging. It is now possible to image monolayers of simple molecules on graphite and also to probe and manipulate individual molecules at surfaces. We are concerneed with the first of the above-mentioned aspects, focusing on the LB technique that has been exploited worldwide for fabricating ultra-thim films of a variety of materials, including conducting polymers. Because the formation of LB films requires the spreading of a monolayer onto an aqueous subphase, some prerequisites must be fulfilled by the material of interest. It must be soluble in a reasonably volatile organic solvent and also sufficiently surface for spreading to occur. The conducting polymers that were first investigated, namely polyacetylene, polypyrrole, polythiophene, and polyaniline, could not be processed in this manner, and therefore several atrategies were developed for overcoming this difficulty. An overview of these strategies will be provided below, following a brief introduction to LB films. Recent developments on the LB films from polyanilines will then be discussed, followed by a description of the most important properties and some of the possible appications that have been demonstrated for LB films of conducting polymers. 653 $aPolimeros 700 1 $aOLIVEIRA JUNIOR, O. N. 700 1 $aFERREIRA, M. 773 $tIn: SALAMONE, J.C. (Ed.). Polymeric materials encyclopedia. Boca Raton: CRC, 1996.
Download
Esconder MarcMostrar Marc Completo |
Registro original: |
Embrapa Instrumentação (CNPDIA) |
|
Biblioteca |
ID |
Origem |
Tipo/Formato |
Classificação |
Cutter |
Registro |
Volume |
Status |
URL |
Voltar
|
|
Registro Completo
Biblioteca(s): |
Embrapa Solos. |
Data corrente: |
09/02/2015 |
Data da última atualização: |
09/02/2015 |
Tipo da produção científica: |
Artigo em Anais de Congresso |
Autoria: |
CAVALCANTI JUNIOR, E. de A.; ACCIOLY, L. J. de O.; SILVA, A. B. da; SILVA, E. A. da; LOPES, H. L.; ALVES, E. da S.; IRMÃO, R. A.; SILVA, J. A. da. |
Afiliação: |
EDILTON DE ALBUQUERQUE CAVALCANTI JUNIOR, UFPE; LUCIANO JOSE DE OLIVEIRA ACCIOLY, CNPS; ADEMAR BARROS DA SILVA, CNPS; EDUARDO ALVES DA SILVA, UFPE; HÉLIO LEANDRO LOPES, UNIVERSIDADE FEDERAL DO VALE DO SÃO FRANCISCO; EUDMAR DA SILVA ALVES, UFRPE; RICARDO ALEXANDRE IRMÃO, UFPE; JULIANA ALVES DA SILVA, UFPE. |
Título: |
Relação entre mudanças no uso da terra e o relevo em uma área piloto da zona da mata sul de Pernambuco. |
Ano de publicação: |
2014 |
Fonte/Imprenta: |
In: CONGRESSO NACIONAL DE MEIO AMBIENTE DE POÇOS DE CALDAS, 11., 2014, Poços de Caldas. Anais... Poços de Caldas: GSC Eventos Especiais: Instituto Federal do Sul de Minas, 2014. |
Idioma: |
Português |
Conteúdo: |
A identificação, a interpretação, a organização e a espacialização de características ambientais tais como: solos, relevo, clima, uso e ocupação, entre outras, numa escala adequada, são de fundamental importância quando se pretende elaborar uma estratégia de desenvolvimento rural em bases sustentáveis. A expansão da cultura da cana-de-açúcar na Zona da Mata Sul de Pernambuco, motivada pelo Proálcool, não atendeu a esses requisitos, principalmente, com relação ao relevo. Desta forma, o presente estudo tem como objetivos: 1) elaborar os mapas de relevo (altitude e declividade), cobertura ?recente? e cobertura ?pretérita?; 2) avaliar as mudanças na cobertura de mata Atlântica; 3) avaliar a adequação do uso da terra ao relevo de uma área piloto da Zona da Mata Sul de Pernambuco. A área selecionada (aproximadamente 75.000 ha) foi delimitada utilizando mapas planialtimétricos na escala 1:25.000. Esses mapas foram usados na obtenção do modelo digital de terreno (MDT) e extração das áreas com mata Atlântica no início da década de 1970. O mapa de uso e cobertura ?recente? foi obtido usando imagens do sensor Landsat 5 TM. Aproximadamente 50% da área apresenta relevo forte ondulado e montanhoso impróprias para o uso agropecuário. Apesar disso, a cana-de-açúcar ocupa 45% dessas áreas, cuja aptidão é para a preservação da fauna e da flora e recreação. Dos cerca de 24.000 ha de matas existentes na década de 70, 16.000 ha foram removidos. Dos atuais 11.907 ha de mata Atlântica, aproximadamente 4.052 ha são de novas formações. MenosA identificação, a interpretação, a organização e a espacialização de características ambientais tais como: solos, relevo, clima, uso e ocupação, entre outras, numa escala adequada, são de fundamental importância quando se pretende elaborar uma estratégia de desenvolvimento rural em bases sustentáveis. A expansão da cultura da cana-de-açúcar na Zona da Mata Sul de Pernambuco, motivada pelo Proálcool, não atendeu a esses requisitos, principalmente, com relação ao relevo. Desta forma, o presente estudo tem como objetivos: 1) elaborar os mapas de relevo (altitude e declividade), cobertura ?recente? e cobertura ?pretérita?; 2) avaliar as mudanças na cobertura de mata Atlântica; 3) avaliar a adequação do uso da terra ao relevo de uma área piloto da Zona da Mata Sul de Pernambuco. A área selecionada (aproximadamente 75.000 ha) foi delimitada utilizando mapas planialtimétricos na escala 1:25.000. Esses mapas foram usados na obtenção do modelo digital de terreno (MDT) e extração das áreas com mata Atlântica no início da década de 1970. O mapa de uso e cobertura ?recente? foi obtido usando imagens do sensor Landsat 5 TM. Aproximadamente 50% da área apresenta relevo forte ondulado e montanhoso impróprias para o uso agropecuário. Apesar disso, a cana-de-açúcar ocupa 45% dessas áreas, cuja aptidão é para a preservação da fauna e da flora e recreação. Dos cerca de 24.000 ha de matas existentes na década de 70, 16.000 ha foram removidos. Dos atuais 11.907 ha de mata Atlântica, aproximadam... Mostrar Tudo |
Palavras-Chave: |
Organização. |
Thesagro: |
Ocupação; Solo; Vegetação. |
Categoria do assunto: |
P Recursos Naturais, Ciências Ambientais e da Terra |
URL: |
https://ainfo.cnptia.embrapa.br/digital/bitstream/item/117562/1/RELACAO-ENTRE-MUDANCAS.pdf
|
Marc: |
LEADER 02447nam a2200241 a 4500 001 2008199 005 2015-02-09 008 2014 bl uuuu u00u1 u #d 100 1 $aCAVALCANTI JUNIOR, E. de A. 245 $aRelação entre mudanças no uso da terra e o relevo em uma área piloto da zona da mata sul de Pernambuco.$h[electronic resource] 260 $aIn: CONGRESSO NACIONAL DE MEIO AMBIENTE DE POÇOS DE CALDAS, 11., 2014, Poços de Caldas. Anais... Poços de Caldas: GSC Eventos Especiais: Instituto Federal do Sul de Minas$c2014 520 $aA identificação, a interpretação, a organização e a espacialização de características ambientais tais como: solos, relevo, clima, uso e ocupação, entre outras, numa escala adequada, são de fundamental importância quando se pretende elaborar uma estratégia de desenvolvimento rural em bases sustentáveis. A expansão da cultura da cana-de-açúcar na Zona da Mata Sul de Pernambuco, motivada pelo Proálcool, não atendeu a esses requisitos, principalmente, com relação ao relevo. Desta forma, o presente estudo tem como objetivos: 1) elaborar os mapas de relevo (altitude e declividade), cobertura ?recente? e cobertura ?pretérita?; 2) avaliar as mudanças na cobertura de mata Atlântica; 3) avaliar a adequação do uso da terra ao relevo de uma área piloto da Zona da Mata Sul de Pernambuco. A área selecionada (aproximadamente 75.000 ha) foi delimitada utilizando mapas planialtimétricos na escala 1:25.000. Esses mapas foram usados na obtenção do modelo digital de terreno (MDT) e extração das áreas com mata Atlântica no início da década de 1970. O mapa de uso e cobertura ?recente? foi obtido usando imagens do sensor Landsat 5 TM. Aproximadamente 50% da área apresenta relevo forte ondulado e montanhoso impróprias para o uso agropecuário. Apesar disso, a cana-de-açúcar ocupa 45% dessas áreas, cuja aptidão é para a preservação da fauna e da flora e recreação. Dos cerca de 24.000 ha de matas existentes na década de 70, 16.000 ha foram removidos. Dos atuais 11.907 ha de mata Atlântica, aproximadamente 4.052 ha são de novas formações. 650 $aOcupação 650 $aSolo 650 $aVegetação 653 $aOrganização 700 1 $aACCIOLY, L. J. de O. 700 1 $aSILVA, A. B. da 700 1 $aSILVA, E. A. da 700 1 $aLOPES, H. L. 700 1 $aALVES, E. da S. 700 1 $aIRMÃO, R. A. 700 1 $aSILVA, J. A. da
Download
Esconder MarcMostrar Marc Completo |
Registro original: |
Embrapa Solos (CNPS) |
|
Biblioteca |
ID |
Origem |
Tipo/Formato |
Classificação |
Cutter |
Registro |
Volume |
Status |
Fechar
|
Expressão de busca inválida. Verifique!!! |
|
|