| |
|
|
 | Acesso ao texto completo restrito à biblioteca da Embrapa Agroindústria de Alimentos. Para informações adicionais entre em contato com ctaa.biblioteca@embrapa.br. |
|
Registro Completo |
|
Biblioteca(s): |
Embrapa Agroindústria de Alimentos. |
|
Data corrente: |
11/05/2023 |
|
Data da última atualização: |
25/05/2023 |
|
Tipo da produção científica: |
Autoria/Organização/Edição de Livros |
|
Autoria: |
ASCHERI, J. L. R. |
|
Afiliação: |
JOSE LUIS RAMIREZ ASCHERI, CTAA. |
|
Título: |
Thermoplastic food extrusion, questions, and answers: a simplified approach. |
|
Ano de publicação: |
2023 |
|
Fonte/Imprenta: |
Ponta Grossa, PR: Atena, 2023. |
|
DOI: |
https://doi.org/10.22533/at.ed.390221612 |
|
Idioma: |
Inglês |
|
Conteúdo: |
Thermoplastic extrusion is a technological process for pre-cooking or cooking various raw materials derived from cereals, grains such as legumes, pulses, starches from different sources, agro-industrial by-products, etc. The raw material is previously prepared according to the need for particle size, packaged with the amount of water sufficient to cause the expected degree of cooking, by passing through a screw with a defined configuration inserted in a cannon or barrel with sufficient temperature in its heating zones, in order to modify its characteristics caused by the heat and shear produced inside the barrel in order to gain new organoleptic characteristics, such as texture, taste, odor and nutritional and functional properties. Many commercially available foods are prepared by this process: snacks, breakfast cereals, pre-cooked or instant flour, and cookies, among other foods for human consumption. On the other hand, in livestock, a wide variety of rations are used for different species as well as their stages of growth according to nutritional needs, in the same way for pets (pet food), food of different types according to the requirements in each case. Another sector with high production values is aquaculture, with the delivery of feed for different species and levels of growth, which together involve large revenues for these sectors. In this sense, entrepreneurs from different areas emerge with the desire to use this technology with the available resources, in order to add value and consequent income improvement. Due to the existence of a wide variety of extruders, from the simplest to the most complex, with single or double screws and different accessories, the entrepreneur will need to evaluate which is the most appropriate, both from an economic and technological point of view. A decision that needs to be studied in order to guarantee investment and success with the productivity of the production line. For the reasons described, this little book of questions and answers has been created for those who want to preliminarily know the circumstances of the thermoplastic extrusion process. MenosThermoplastic extrusion is a technological process for pre-cooking or cooking various raw materials derived from cereals, grains such as legumes, pulses, starches from different sources, agro-industrial by-products, etc. The raw material is previously prepared according to the need for particle size, packaged with the amount of water sufficient to cause the expected degree of cooking, by passing through a screw with a defined configuration inserted in a cannon or barrel with sufficient temperature in its heating zones, in order to modify its characteristics caused by the heat and shear produced inside the barrel in order to gain new organoleptic characteristics, such as texture, taste, odor and nutritional and functional properties. Many commercially available foods are prepared by this process: snacks, breakfast cereals, pre-cooked or instant flour, and cookies, among other foods for human consumption. On the other hand, in livestock, a wide variety of rations are used for different species as well as their stages of growth according to nutritional needs, in the same way for pets (pet food), food of different types according to the requirements in each case. Another sector with high production values is aquaculture, with the delivery of feed for different species and levels of growth, which together involve large revenues for these sectors. In this sense, entrepreneurs from different areas emerge with the desire to use this technology with the available resources, in order ... Mostrar Tudo |
|
Thesaurus Nal: |
Food technology. |
|
Categoria do assunto: |
-- |
|
Marc: |
LEADER 02560nam a2200133 a 4500
001 2153700
005 2023-05-25
008 2023 bl uuuu 00u1 u #d
024 7 $ahttps://doi.org/10.22533/at.ed.390221612$2DOI
100 1 $aASCHERI, J. L. R.
245 $aThermoplastic food extrusion, questions, and answers$ba simplified approach.$h[electronic resource]
260 $aPonta Grossa, PR: Atena$c2023
520 $aThermoplastic extrusion is a technological process for pre-cooking or cooking various raw materials derived from cereals, grains such as legumes, pulses, starches from different sources, agro-industrial by-products, etc. The raw material is previously prepared according to the need for particle size, packaged with the amount of water sufficient to cause the expected degree of cooking, by passing through a screw with a defined configuration inserted in a cannon or barrel with sufficient temperature in its heating zones, in order to modify its characteristics caused by the heat and shear produced inside the barrel in order to gain new organoleptic characteristics, such as texture, taste, odor and nutritional and functional properties. Many commercially available foods are prepared by this process: snacks, breakfast cereals, pre-cooked or instant flour, and cookies, among other foods for human consumption. On the other hand, in livestock, a wide variety of rations are used for different species as well as their stages of growth according to nutritional needs, in the same way for pets (pet food), food of different types according to the requirements in each case. Another sector with high production values is aquaculture, with the delivery of feed for different species and levels of growth, which together involve large revenues for these sectors. In this sense, entrepreneurs from different areas emerge with the desire to use this technology with the available resources, in order to add value and consequent income improvement. Due to the existence of a wide variety of extruders, from the simplest to the most complex, with single or double screws and different accessories, the entrepreneur will need to evaluate which is the most appropriate, both from an economic and technological point of view. A decision that needs to be studied in order to guarantee investment and success with the productivity of the production line. For the reasons described, this little book of questions and answers has been created for those who want to preliminarily know the circumstances of the thermoplastic extrusion process.
650 $aFood technology
Download
Esconder MarcMostrar Marc Completo |
|
Registro original: |
Embrapa Agroindústria de Alimentos (CTAA) |
|
|
Biblioteca |
ID |
Origem |
Tipo/Formato |
Classificação |
Cutter |
Registro |
Volume |
Status |
URL |
Voltar
|
|
|
| Registros recuperados : 19 | |
| 1. |  | BRACCINI, A. de L. E; REIS, M. S.; SEDIYAMA, C. S.; SEDIYAMA, T.; ROCHA, V. S. Influência do potencial hídrico induzido por polietilenoglicol na qualidade fisiológica de sementes de soja. Pesquisa Agropecuária Brasileira, Brasília, DF, v. 33, n. 9, p. 1451-59, set. 1998. Título em inglês: Effects of water potential induced the polyethyleneglycol on soybean seed physiological quality.| Biblioteca(s): Embrapa Unidades Centrais. |
|    |
| 3. | | SCAPIM, C. A; RODRIGUES, J. A. S.; CRUZ, C. D.; GOMES, J. A.; BRACCINI, A. de L. e. Efeitos gênicos, heterose e depressão endogâmica em caracteres de sorgo granífero. Pesquisa Agropecuária Brasileira, Brasília, v. 33, n. 11, p. 1847-1857, 1998.| Biblioteca(s): Embrapa Milho e Sorgo; Embrapa Unidades Centrais. |
| |
| 4. | | BRACCINI, A. de L. e; REIS, M. S.; MOREIRA, M. A.; SEDIYAMA, C. S.; SCAPIM, C. A. Biochemical changes associated to soybean seeds osmoconditioning during storage. Pesquisa Agropecuária Brasileira, Brasília, DF, v. 35, n. 2, p. 433-447, fev. 2000 Título em português: Alterações bioquímicas associadas ao condicionamento osmótico de sementes de soja durante o armazenamento.| Biblioteca(s): Embrapa Unidades Centrais. |
| |
| 5. | | BRACCINI, A. de L. E; REIS, M. S.; SEDIYAMA, C. S.; SCAPIM, C. A.; BRACCINI, M. do C. L. Avaliação da qualidade fisiológica de sementes de soja, após o processo de hidratação-desidratação e envelhecimento acelerado. Pesquisa Agropecuária Brasileira, Brasília, DF, v. 34, n. 6, p. 1053-66, jun. 1999 Título em inglês: Soybean physiological seed quality evaluation after hydration-dehydration process and accelerated aging.| Biblioteca(s): Embrapa Unidades Centrais. |
| |
| 7. | | LEMOS, N. G.; BRACCINI, A. de L. e; ABDELNOOR, R. V.; NEVES, M. C.; SUENAGA, K.; YAMANAKA, N. Characterization of genes Rpp2, and Rpp5 conferring resistance to soybean rust. In: AKAMATSU, H.; YAMANAKA, N.; SUENAGA, K. (Ed.). Identification of Stable Resistance to Soybean Rust for South America. Tsukuba: JIRCAS, 2014. (JIRCAS Working Report, 81). p. 79-87.| Tipo: Capítulo em Livro Técnico-Científico |
| Biblioteca(s): Embrapa Soja. |
|  |
| 8. | | SANTOS, C. T. dos; DALPASQUALE, V. A.; SCAPIM, C. A.; BRACCINI, A. de L. e; KRZYZANOWSKI, F. C. Milk line as an indicator of the harvesting time of three hybrid seeds of corn (Zea mays L.). Brazilian Archives of Biology and Technology, Curitiba, v. 48, n. 2, p. 161-170, Mar. 2005.| Tipo: Artigo em Periódico Indexado |
| Biblioteca(s): Embrapa Soja. |
| |
| 9. | | MINUZZI, A.; RANGEL, M. A. S.; BRACCINI, A. de L. e; SCAPIM, C. A.; MORA, F.; ROBAINA, A. D. Rendimento, teores de óleo e proteínas de quatro cultivares de soja, produzidas em dois locais no Estado do Mato Grosso do Sul. Ciência e Agrotecnologia, Lavras, v. 33, n. 4, p. 1047-1054, jul/ago. 2009.| Tipo: Artigo em Periódico Indexado | Circulação/Nível: B - 1 |
| Biblioteca(s): Embrapa Mandioca e Fruticultura. |
| |
| 10. | | MINUZZI, A.; BRACCINI, A. de L. e; RANGEL, M. A. S.; SCAPIM, C. A.; BARBOSA, M. C.; ALBRECHT, L. P. Qualidade de sementes de quatro cultivares de soja, colhidas em dois locais no Estado do Mato Grosso do Sul. Revista Brasileira de Sementes, Londrina, v. 32, n. 1, p. 176-185, 2010.| Tipo: Nota Técnica/Nota Científica | Circulação/Nível: B - 2 |
| Biblioteca(s): Embrapa Agropecuária Oeste; Embrapa Mandioca e Fruticultura. |
| |
| 11. | | SCHUAB, S. R.; BRACCINI, A. de L. e.; FRANÇA NETO, J. de B.; SCAPIM, C. A.; MESCHEDE, D, K. Utilização da taxa de crescimento das plântulas na avaliação do vigor de sementes de soja. Revista Brasileira de Sementes, Londrina, v. 24, n. 2, p. 90-95, dez. 2002.| Biblioteca(s): Embrapa Soja. |
| |
| 12. | | MOREANO, T. B.; BRACCINI, A. de L. e; SCAPIM, C. A.; FRANÇA-NETO, J. de B.; KRZYZANOWSKI, F. C.; MARQUES, O. J. Evolução da qualidade física de sementes de soja durante o beneficiamento. Informativo ABRATES, Londrina, v. 23, n. 3, p. 25-31, dez. 2013.| Tipo: Artigo em Periódico Indexado | Circulação/Nível: B - 5 |
| Biblioteca(s): Embrapa Soja. |
| |
| 13. | | VENDRUSCOLO, E. C. G.; SCAPIM, C. A.; PACHECO, C. A. P.; OLIVEIRA, V. R. de; BRACCINI, A. de L. e; GONCALVES-VIDIGAL, M.C. Adaptabilidade e estabilidade de cultivares de milho-pipoca na região centro-sul do Brasil. Pesquisa Agropecuária Brasileira, Brasília, v. 36, n. 1, p. 123-130, jan. 2001.| Tipo: Artigo em Periódico Indexado |
| Biblioteca(s): Embrapa Milho e Sorgo; Embrapa Unidades Centrais. |
| |
| 14. | | ÁVILA, M. R.; BRACCINI, A. de L. e; SCAPIM, C. A.; MANDARINO, J. M. G.; ALBRECHT, L. P.; VIDIGAL FILHO, P. S. Componentes do rendimento, teores de isoflavonas, proteínas, óleo e qualidade de sementes de soja. Revista Brasileira de Sementes, Pelotas, v. 29, n. 3, p. 111-127, 2007. Título em inglês: Isoflavone, protein and oil contents and soybean seed quality.| Tipo: Artigo em Periódico Indexado | Circulação/Nível: Nacional - A |
| Biblioteca(s): Embrapa Soja. |
| |
| 15. | | YAMANAKA, N.; LEMOS, N. G.; UNO, M.; AKAMATSU, H.; YAMAOKA, Y.; ABDELNOOR, R. V.; BRACCINI, A. de L. e; SUENAGA, K. Resistence to asian soybean rust in soybean lines carrying Rpp2, Rpp4, and Rpp 5. In: AKAMATSU, H.; YAMANAKA, N.; SUENAGA, K. (Ed.). Identification of Stable Resistance to Soybean Rust for South America. Tsukuba: JIRCAS, 2014. (JIRCAS Working Report, 81). p. 88-95.| Tipo: Capítulo em Livro Técnico-Científico |
| Biblioteca(s): Embrapa Soja. |
| |
| 16. | | ÁVILA, M. R.; BRACCINI, A. de L. e; SOUZA, C. G. M.; MANDARINO, J. M. G.; BAZO, G. L.; CABRAL, Y. C. F. Physiological quality, content and activity of antioxidants in soybean seeds artificially aged. Revista Brasileira de Sementes, Viçosa, MG, v. 34, n. 3, p. 397-407, set. 2012.| Tipo: Artigo em Periódico Indexado | Circulação/Nível: B - 2 |
| Biblioteca(s): Embrapa Soja. |
| |
| 17. | | MOREANO, T. B.; BRACCINI, A. de L. e; SCAPIM, C. A.; FRANÇA-NETO, J. de B.; KRZYZANOWSKI, F. C.; MARQUES, O. J. Physical and physiological qualities of soybean seed as affected by processing and handling. Journal of Seed Science, Londrina, v. 35, n. 4, p. 466-477, Dez. 2013.| Tipo: Artigo em Periódico Indexado | Circulação/Nível: B - 4 |
| Biblioteca(s): Embrapa Soja. |
| |
| 18. | | ALBRECHT, L. P.; BRACCINI, A. de L. e; ÁVILA, M. R.; SILVA, G. P.; BARBOSA, M. C.; LEAL, A. F.; ARAGÃO, R. M.; BRAMBILLA, T. Produção de algodão e qualidade de fibra em resposta à aplicação Stimulate 10X. In: CONGRESSO BRASILEIRO DO ALGODÃO, 6., 2007, Uberlândia. Anais... Uberlândia, 2007. p. 1-7 1 CD-ROM| Biblioteca(s): Embrapa Algodão. |
| |
| 19. | | SIMON, G. A.; SCAPIM, C. L.; PACHECO, C. A. P.; PINTO, R. J. B.; BRACCINI, A. de L. e.; TONET, A. Depressão por endogamia em populações de milho-pipoca. Bragantia, Campinas, v. 63, n. 1, p. 55-62, 2004.| Tipo: Artigo em Periódico Indexado |
| Biblioteca(s): Embrapa Milho e Sorgo. |
| |
| Registros recuperados : 19 | |
|
| Nenhum registro encontrado para a expressão de busca informada. |
|
|
