|
|
| Acesso ao texto completo restrito à biblioteca da Embrapa Instrumentação. Para informações adicionais entre em contato com cnpdia.biblioteca@embrapa.br. |
Registro Completo |
Biblioteca(s): |
Embrapa Instrumentação. |
Data corrente: |
11/08/2020 |
Data da última atualização: |
16/08/2022 |
Tipo da produção científica: |
Artigo em Periódico Indexado |
Autoria: |
SILVA, D. W.; SCATOLINO, M. V.; PEREIRA, T. G. T.; VILELA, A. P.; EUGENIO, T. M. C.; MARTINS, M. A.; MENDES, R. F.; BUFALINO, L.; TONOLI, G. H. D.; MENDES, L. M. |
Afiliação: |
MARIA ALICE MARTINS, CNPDIA. |
Título: |
Influence of thermal treatment of eucalyptus fibers on the physical-mechanical properties of extruded fiber-cement composites. |
Ano de publicação: |
2020 |
Fonte/Imprenta: |
Materials Today: Proceedings, v. 31, 2020. |
Páginas: |
S348-S352 |
ISSN: |
2214-7853 |
DOI: |
https://doi.org/10.1016/j.matpr.2020.04.764 |
Idioma: |
Inglês |
Conteúdo: |
This study proposes to evaluate the effect of the heat treatment in commercial eucalyptus fibers (produced by thermo-mechanical process) on the physical-mechanical properties of extruded fiber-cements composites. The fibers were treated with different temperatures of heat treatment (140, 170, 200 and 230 °C) for 60 min in a “Macro-ATG” oven. The chemical and morphological characteristics of the natural fibers were evaluated before and after the thermal treatment. The cementitious paste was composed by 67.9% cement, 29.1% limestone and 3% eucalyptus fibers. Hydroxypropylmethylcellulose (HPMC) and polyether carboxylic acid (ADVA 175) were added to the cement paste both in 1% (based on the cement mass) to facilitate the extrusion process. The thermal treatments at 200 and 230 °C were efficient in reducing the extractives content. On the other hand, a decrease in length, diameter and lumen size of the fibers has occurred. The decrease in extractives content did not influence the properties of water absorption, modulus of rupture (MOR) and modulus of elasticity (MOE). The increase in lignin content resulted in increase for apparent porosity and decrease of the toughness in reinforced fiber-cement produced with fibers treated at 200 and 230 °C. The application of the thermal treatment for the fibers did not show improvement in fiber-cement in the evaluated conditions. It is recommended to evaluate other properties of the fiber-cement reinforced with the mentioned treated fibers, such as natural and laboratorial weathering. MenosThis study proposes to evaluate the effect of the heat treatment in commercial eucalyptus fibers (produced by thermo-mechanical process) on the physical-mechanical properties of extruded fiber-cements composites. The fibers were treated with different temperatures of heat treatment (140, 170, 200 and 230 °C) for 60 min in a “Macro-ATG” oven. The chemical and morphological characteristics of the natural fibers were evaluated before and after the thermal treatment. The cementitious paste was composed by 67.9% cement, 29.1% limestone and 3% eucalyptus fibers. Hydroxypropylmethylcellulose (HPMC) and polyether carboxylic acid (ADVA 175) were added to the cement paste both in 1% (based on the cement mass) to facilitate the extrusion process. The thermal treatments at 200 and 230 °C were efficient in reducing the extractives content. On the other hand, a decrease in length, diameter and lumen size of the fibers has occurred. The decrease in extractives content did not influence the properties of water absorption, modulus of rupture (MOR) and modulus of elasticity (MOE). The increase in lignin content resulted in increase for apparent porosity and decrease of the toughness in reinforced fiber-cement produced with fibers treated at 200 and 230 °C. The application of the thermal treatment for the fibers did not show improvement in fiber-cement in the evaluated conditions. It is recommended to evaluate other properties of the fiber-cement reinforced with the mentioned treated fibers, s... Mostrar Tudo |
Palavras-Chave: |
Cementitious composites; Chemical characterization; Extruded process; Morphological characterization. |
Categoria do assunto: |
-- |
Marc: |
LEADER 02534naa a2200313 a 4500 001 2124283 005 2022-08-16 008 2020 bl uuuu u00u1 u #d 022 $a2214-7853 024 7 $ahttps://doi.org/10.1016/j.matpr.2020.04.764$2DOI 100 1 $aSILVA, D. W. 245 $aInfluence of thermal treatment of eucalyptus fibers on the physical-mechanical properties of extruded fiber-cement composites.$h[electronic resource] 260 $c2020 300 $aS348-S352 520 $aThis study proposes to evaluate the effect of the heat treatment in commercial eucalyptus fibers (produced by thermo-mechanical process) on the physical-mechanical properties of extruded fiber-cements composites. The fibers were treated with different temperatures of heat treatment (140, 170, 200 and 230 °C) for 60 min in a “Macro-ATG” oven. The chemical and morphological characteristics of the natural fibers were evaluated before and after the thermal treatment. The cementitious paste was composed by 67.9% cement, 29.1% limestone and 3% eucalyptus fibers. Hydroxypropylmethylcellulose (HPMC) and polyether carboxylic acid (ADVA 175) were added to the cement paste both in 1% (based on the cement mass) to facilitate the extrusion process. The thermal treatments at 200 and 230 °C were efficient in reducing the extractives content. On the other hand, a decrease in length, diameter and lumen size of the fibers has occurred. The decrease in extractives content did not influence the properties of water absorption, modulus of rupture (MOR) and modulus of elasticity (MOE). The increase in lignin content resulted in increase for apparent porosity and decrease of the toughness in reinforced fiber-cement produced with fibers treated at 200 and 230 °C. The application of the thermal treatment for the fibers did not show improvement in fiber-cement in the evaluated conditions. It is recommended to evaluate other properties of the fiber-cement reinforced with the mentioned treated fibers, such as natural and laboratorial weathering. 653 $aCementitious composites 653 $aChemical characterization 653 $aExtruded process 653 $aMorphological characterization 700 1 $aSCATOLINO, M. V. 700 1 $aPEREIRA, T. G. T. 700 1 $aVILELA, A. P. 700 1 $aEUGENIO, T. M. C. 700 1 $aMARTINS, M. A. 700 1 $aMENDES, R. F. 700 1 $aBUFALINO, L. 700 1 $aTONOLI, G. H. D. 700 1 $aMENDES, L. M. 773 $tMaterials Today: Proceedings$gv. 31, 2020.
Download
Esconder MarcMostrar Marc Completo |
Registro original: |
Embrapa Instrumentação (CNPDIA) |
|
Biblioteca |
ID |
Origem |
Tipo/Formato |
Classificação |
Cutter |
Registro |
Volume |
Status |
URL |
Voltar
|
|
| Acesso ao texto completo restrito à biblioteca da Embrapa Agricultura Digital. Para informações adicionais entre em contato com cnptia.biblioteca@embrapa.br. |
Registro Completo
Biblioteca(s): |
Embrapa Agricultura Digital. |
Data corrente: |
04/06/2001 |
Data da última atualização: |
20/01/2020 |
Autoria: |
ANTUNES, J. F. G.; BERNARDES, M. H. S.; MELGAÇO, R. de M. |
Afiliação: |
JOAO FRANCISCO GONCALVES ANTUNES, CNPTIA; MÁRIO HENRIQUE STEFFANONI BERNARDES, Bolsista Iniciação Técnica Industrial - Programa RHAE CNPq; RODRIGO DE MELO MELGAÇO, Bolsista Iniciação Técnica Industrial - Programa RHAE CNPq. |
Título: |
A organização e recuperação de informação nas bibliotecas da Embrapa. |
Ano de publicação: |
2000 |
Fonte/Imprenta: |
In: CONGRESSO DA SBI-AGRO, 2., 1999, Campinas. [Anais...]. [S.l.: s.n.], 2000. |
Páginas: |
Não paginado. |
Idioma: |
Português |
Notas: |
Agrosoft 99. |
Conteúdo: |
O recurso informação tem sido constantemente mencionado como de extrema importância no mundo atual, ganhando uma característica cada vez mais dinâmica. Visando melhor cumprir seu objetivos, a Empresa Brasileira de Pesquisa Agropecuária (Embrapa) continua buscando mecanismos adequados para o uso e transferência da informação técnico-científica existente em suas bibliotecas, concentrando esforços no sentido de modernizar a infraestrutura de software utilizada para organização, gerenciamento e disseminação de toda essa informação. Desde sua primeira versão em 1991, o AINFO tem evoluído para incorporar novas funcionalidades vinculadas às necessidades de seus usuários, atendendo as demandas dos diferentes segmentos do agronegócio. Assim, surge em 1999, o AINFOw, um novo sistema de software com as seguintes características: (1) baseado numa arquitetura cliente/servidor que não apenas utiliza recursos de um sistema gerenciador de banco de dados (por exemplo: controle de concorrência e manutenção de integridade das bases de dados) mas que também oferece facilidades de recuperação de informação não disponíveis nestes; (2) apresenta interface bastante amigável (MS Windows); (3) provê facilidades para o processo de gestão de bases de dados bibliográficos e cadastrais, e finalmente; (4) possibilita a automação de diversos processos bibliográficos (por exemplo: Controle de Aquisição e Empréstimos). |
Palavras-Chave: |
Ainfo; Automação de bibliotecas; Information system; Library automation; Recuperação de informação. |
Thesagro: |
Sistema de Informação. |
Thesaurus NAL: |
Information retrieval. |
Categoria do assunto: |
X Pesquisa, Tecnologia e Engenharia |
Marc: |
LEADER 02225nam a2200241 a 4500 001 1007917 005 2020-01-20 008 2000 bl uuuu u00u1 u #d 100 1 $aANTUNES, J. F. G. 245 $aA organização e recuperação de informação nas bibliotecas da Embrapa.$h[electronic resource] 260 $aIn: CONGRESSO DA SBI-AGRO, 2., 1999, Campinas. [Anais...]. [S.l.: s.n.]$c2000 300 $aNão paginado. 500 $aAgrosoft 99. 520 $aO recurso informação tem sido constantemente mencionado como de extrema importância no mundo atual, ganhando uma característica cada vez mais dinâmica. Visando melhor cumprir seu objetivos, a Empresa Brasileira de Pesquisa Agropecuária (Embrapa) continua buscando mecanismos adequados para o uso e transferência da informação técnico-científica existente em suas bibliotecas, concentrando esforços no sentido de modernizar a infraestrutura de software utilizada para organização, gerenciamento e disseminação de toda essa informação. Desde sua primeira versão em 1991, o AINFO tem evoluído para incorporar novas funcionalidades vinculadas às necessidades de seus usuários, atendendo as demandas dos diferentes segmentos do agronegócio. Assim, surge em 1999, o AINFOw, um novo sistema de software com as seguintes características: (1) baseado numa arquitetura cliente/servidor que não apenas utiliza recursos de um sistema gerenciador de banco de dados (por exemplo: controle de concorrência e manutenção de integridade das bases de dados) mas que também oferece facilidades de recuperação de informação não disponíveis nestes; (2) apresenta interface bastante amigável (MS Windows); (3) provê facilidades para o processo de gestão de bases de dados bibliográficos e cadastrais, e finalmente; (4) possibilita a automação de diversos processos bibliográficos (por exemplo: Controle de Aquisição e Empréstimos). 650 $aInformation retrieval 650 $aSistema de Informação 653 $aAinfo 653 $aAutomação de bibliotecas 653 $aInformation system 653 $aLibrary automation 653 $aRecuperação de informação 700 1 $aBERNARDES, M. H. S. 700 1 $aMELGAÇO, R. de M.
Download
Esconder MarcMostrar Marc Completo |
Registro original: |
Embrapa Agricultura Digital (CNPTIA) |
|
Biblioteca |
ID |
Origem |
Tipo/Formato |
Classificação |
Cutter |
Registro |
Volume |
Status |
Fechar
|
Expressão de busca inválida. Verifique!!! |
|
|