| |
|
|
| Registros recuperados : 413 | |
| Registros recuperados : 413 | |
|
|
|
 | Acesso ao texto completo restrito à biblioteca da Embrapa Milho e Sorgo. Para informações adicionais entre em contato com cnpms.biblioteca@embrapa.br. |
Registro Completo
|
Biblioteca(s): |
Embrapa Milho e Sorgo. |
|
Data corrente: |
14/04/1999 |
|
Data da última atualização: |
11/06/2018 |
|
Tipo da produção científica: |
Artigo em Periódico Indexado |
|
Autoria: |
ANDRADE, C. de L. T. de; ALLEN, R. G.; WELLS, R. D. |
|
Afiliação: |
CAMILO DE LELIS TEIXEIRA DE ANDRADE, CNPMS. |
|
Título: |
SPRINKMOD - pressure and discharge simulation model for pressurized irrigation systems. 1. Model development and description. |
|
Ano de publicação: |
1999 |
|
Fonte/Imprenta: |
Irrigation Science, New York, v. 18, p. 141-148, 1999. |
|
Idioma: |
Inglês |
|
Conteúdo: |
A computer model was developed to simulate pressure and flow rate distribution along pipes and laterals of pressurized irrigation systems in operation. The software runs in a Windows environment and is capable of simulating irrigation systems having multiple pump stations combined in series and/or in parallel, booster pump stations, parallel pipes and looping pipes. Hand-move, wheel line and center pivot laterals with pressure regulators, one or two drop pipes per outlet and booster pump can be simulated. Leakage can be included in the main pipe network or along the laterals. Lateral inlet pressure can be set to an upper limit to simulate valve closure. Practically any type of nozzle and pump can be simulated since cubic spline functions are used to interpolate values from head-flow rate sets of data. To accomplish these capabilities, algorithms were developed and adapted to convert laterals into a set of head-flow rate data so that a simplified algorithm could be adapted to solve the entire pipe network. A userfriendly interface was designed to allow data dor pumps, nozzle and pressure regulators to be interactively entered, edited and analyzed prior to the simulation run. The layout of the irrigation system can be drawn on screen using the mouse. Data can be independently entered and edited for each irrigation system component already drawn in the screen, at any time and in any order. Data for the entire irrigation system are verified at many levels before the simulation is run, to make the model less susceptible to crash. The model proved to be a practical tool for upgrading and designing pressurized irrigation systems. MenosA computer model was developed to simulate pressure and flow rate distribution along pipes and laterals of pressurized irrigation systems in operation. The software runs in a Windows environment and is capable of simulating irrigation systems having multiple pump stations combined in series and/or in parallel, booster pump stations, parallel pipes and looping pipes. Hand-move, wheel line and center pivot laterals with pressure regulators, one or two drop pipes per outlet and booster pump can be simulated. Leakage can be included in the main pipe network or along the laterals. Lateral inlet pressure can be set to an upper limit to simulate valve closure. Practically any type of nozzle and pump can be simulated since cubic spline functions are used to interpolate values from head-flow rate sets of data. To accomplish these capabilities, algorithms were developed and adapted to convert laterals into a set of head-flow rate data so that a simplified algorithm could be adapted to solve the entire pipe network. A userfriendly interface was designed to allow data dor pumps, nozzle and pressure regulators to be interactively entered, edited and analyzed prior to the simulation run. The layout of the irrigation system can be drawn on screen using the mouse. Data can be independently entered and edited for each irrigation system component already drawn in the screen, at any time and in any order. Data for the entire irrigation system are verified at many levels before the simulation i... Mostrar Tudo |
|
Palavras-Chave: |
Hydraulica; Programas; Programs; Projetos; Simulation; Sprinker. |
|
Thesagro: |
Hidráulica; Irrigação; Simulação. |
|
Thesaurus NAL: |
design; irrigation. |
|
Categoria do assunto: |
X Pesquisa, Tecnologia e Engenharia |
|
Marc: |
LEADER 02433naa a2200277 a 4500
001 1482095
005 2018-06-11
008 1999 bl uuuu u00u1 u #d
100 1 $aANDRADE, C. de L. T. de
245 $aSPRINKMOD - pressure and discharge simulation model for pressurized irrigation systems. 1. Model development and description.$h[electronic resource]
260 $c1999
520 $aA computer model was developed to simulate pressure and flow rate distribution along pipes and laterals of pressurized irrigation systems in operation. The software runs in a Windows environment and is capable of simulating irrigation systems having multiple pump stations combined in series and/or in parallel, booster pump stations, parallel pipes and looping pipes. Hand-move, wheel line and center pivot laterals with pressure regulators, one or two drop pipes per outlet and booster pump can be simulated. Leakage can be included in the main pipe network or along the laterals. Lateral inlet pressure can be set to an upper limit to simulate valve closure. Practically any type of nozzle and pump can be simulated since cubic spline functions are used to interpolate values from head-flow rate sets of data. To accomplish these capabilities, algorithms were developed and adapted to convert laterals into a set of head-flow rate data so that a simplified algorithm could be adapted to solve the entire pipe network. A userfriendly interface was designed to allow data dor pumps, nozzle and pressure regulators to be interactively entered, edited and analyzed prior to the simulation run. The layout of the irrigation system can be drawn on screen using the mouse. Data can be independently entered and edited for each irrigation system component already drawn in the screen, at any time and in any order. Data for the entire irrigation system are verified at many levels before the simulation is run, to make the model less susceptible to crash. The model proved to be a practical tool for upgrading and designing pressurized irrigation systems.
650 $adesign
650 $airrigation
650 $aHidráulica
650 $aIrrigação
650 $aSimulação
653 $aHydraulica
653 $aProgramas
653 $aPrograms
653 $aProjetos
653 $aSimulation
653 $aSprinker
700 1 $aALLEN, R. G.
700 1 $aWELLS, R. D.
773 $tIrrigation Science, New York$gv. 18, p. 141-148, 1999.
Download
Esconder MarcMostrar Marc Completo |
|
Registro original: |
Embrapa Milho e Sorgo (CNPMS) |
|
|
Biblioteca |
ID |
Origem |
Tipo/Formato |
Classificação |
Cutter |
Registro |
Volume |
Status |
Fechar
|
| Nenhum registro encontrado para a expressão de busca informada. |
|
|
