|
|
Registro Completo |
Biblioteca(s): |
Embrapa Agropecuária Oeste; Embrapa Arroz e Feijão; Embrapa Cerrados; Embrapa Soja; Embrapa Unidades Centrais. |
Data corrente: |
20/08/2004 |
Data da última atualização: |
28/10/2009 |
Autoria: |
CARVALHO JUNIOR, O. A. de; CARDOSO, F. B. da F.; MARTINS, E. de S.; JUNQUEIRA, F. de F.; CARVALHO, A. P. F. de; REATTO, A.; GUIMARAES, R. F. |
Título: |
Quantificação do índice de vazios do solo utilizando técnicas de processamento de imagens digitais. |
Ano de publicação: |
2002 |
Fonte/Imprenta: |
Planaltina, DF: Embrapa Cerrados, 2002. |
Páginas: |
15 p. |
Série: |
(Embrapa Cerrados. Boletim de Pesquisa e Desenvolvimento, 60). |
Idioma: |
Português |
Conteúdo: |
RESUMO: Este trabalho apresenta uma abordagem metodológica para obter o índice de vazios de solo (e) utilizando técnicas de processamento de imagens. Como esse método permite uma obtenção automática, o procedimento pode ser considerado mais fácil, mais rápido e mais preciso que técnicas convencionais. A metodologia está baseada na classificação supervisionada de áreas de vazios presentes em seções delgadas de solo. A metodologia pode ser resumida nos passos seguintes: (a) elaboração de seção delgada da amostra de solo (se a porosidade do solo tiver um padrão anisotrópico, várias lâminas devem ser confeccionadas seguindo o eixo de comprimento preferencial; (b) são fotografadas as seções delgadas e gravadas em formato digital em RGB; (c) a imagem colorida é separada em três níveis de cinza nivelando a relação das imagens para Vermelho (R), Verde (G) e Azul (B); (d) as imagens são submetidas a uma Análise de Componentes Principais que permitem o realce das áreas de vazios; (e) classificação supervisionada de imagens; (f) cálculo de vazios. As técnicas de classificação supervisionada, utilizadas, foram as seguintes: abordagem do paralelepípedo, distâncias mínima e máxima probabilidade. Foram obtidos os melhores resultados com a máxima probabilidade que permitiu definir os contornos dos vazios. Essa metodologia foi considerada eficiente para a obtenção do índice de vazios do solo e o procedimento provou ser simples e rápido. ABSTRACT: This work presents a methodological approach to obtain soil's void ratio (e) through image processing techniques. How this method enables an automatic obtaining the procedure can be considered easiest, quickest and more accurate than conventional techniques. It is based on supervisioned classification of void areas present in a soil thin section. The methodology can be shared in the following steps: a) elaboration of the thin sction from the soil sample (if the soil porosity owns na anisotropic pattern, slice sheets have to be done following voids preferential legth axis; b) thin sections are photographed and scanned in RGB digital format; c) the colored image is deparated in three grey levels images relation to Red (R), Green (G) and Blue (B); d) images are submitted to a Principal Component Analysis that permit enhacement of void areas; e) supervisioned classification of images; and f) calculation of voids. Supervisioned classification techniques used were: parallelepiped approach, minimum distance and maximum likelihood. Best results were obtained with maximum likelihood that allowed well define void contours. This methodology was considered efficient to the soil's void ratio obtaining and the procedure proved to be simple and quick. MenosRESUMO: Este trabalho apresenta uma abordagem metodológica para obter o índice de vazios de solo (e) utilizando técnicas de processamento de imagens. Como esse método permite uma obtenção automática, o procedimento pode ser considerado mais fácil, mais rápido e mais preciso que técnicas convencionais. A metodologia está baseada na classificação supervisionada de áreas de vazios presentes em seções delgadas de solo. A metodologia pode ser resumida nos passos seguintes: (a) elaboração de seção delgada da amostra de solo (se a porosidade do solo tiver um padrão anisotrópico, várias lâminas devem ser confeccionadas seguindo o eixo de comprimento preferencial; (b) são fotografadas as seções delgadas e gravadas em formato digital em RGB; (c) a imagem colorida é separada em três níveis de cinza nivelando a relação das imagens para Vermelho (R), Verde (G) e Azul (B); (d) as imagens são submetidas a uma Análise de Componentes Principais que permitem o realce das áreas de vazios; (e) classificação supervisionada de imagens; (f) cálculo de vazios. As técnicas de classificação supervisionada, utilizadas, foram as seguintes: abordagem do paralelepípedo, distâncias mínima e máxima probabilidade. Foram obtidos os melhores resultados com a máxima probabilidade que permitiu definir os contornos dos vazios. Essa metodologia foi considerada eficiente para a obtenção do índice de vazios do solo e o procedimento provou ser simples e rápido. ABSTRACT: This work presents a methodological approach ... Mostrar Tudo |
Palavras-Chave: |
Chemicophysical properties; Digital image; Geoprocessamento; IDRISI; Imagem digital; Índices de vazios; Micromorfologia; Micromorphology; Seção delgada; Solos; Thin section; Void ratio. |
Thesagro: |
Cerrado; Porosidade; Propriedade Físico-Química; Sensoriamento Remoto; Solo. |
Thesaurus Nal: |
porosity; remote sensing; soil. |
Categoria do assunto: |
-- |
URL: |
https://ainfo.cnptia.embrapa.br/digital/bitstream/CPAC-2009/24827/1/bolpd_60.pdf
|
Marc: |
LEADER 04022nam a2200445 a 4500 001 1567773 005 2009-10-28 008 2002 bl uuuu u0uu1 u #d 100 1 $aCARVALHO JUNIOR, O. A. de 245 $aQuantificação do índice de vazios do solo utilizando técnicas de processamento de imagens digitais. 260 $aPlanaltina, DF: Embrapa Cerrados$c2002 300 $a15 p. 490 $a(Embrapa Cerrados. Boletim de Pesquisa e Desenvolvimento, 60). 520 $aRESUMO: Este trabalho apresenta uma abordagem metodológica para obter o índice de vazios de solo (e) utilizando técnicas de processamento de imagens. Como esse método permite uma obtenção automática, o procedimento pode ser considerado mais fácil, mais rápido e mais preciso que técnicas convencionais. A metodologia está baseada na classificação supervisionada de áreas de vazios presentes em seções delgadas de solo. A metodologia pode ser resumida nos passos seguintes: (a) elaboração de seção delgada da amostra de solo (se a porosidade do solo tiver um padrão anisotrópico, várias lâminas devem ser confeccionadas seguindo o eixo de comprimento preferencial; (b) são fotografadas as seções delgadas e gravadas em formato digital em RGB; (c) a imagem colorida é separada em três níveis de cinza nivelando a relação das imagens para Vermelho (R), Verde (G) e Azul (B); (d) as imagens são submetidas a uma Análise de Componentes Principais que permitem o realce das áreas de vazios; (e) classificação supervisionada de imagens; (f) cálculo de vazios. As técnicas de classificação supervisionada, utilizadas, foram as seguintes: abordagem do paralelepípedo, distâncias mínima e máxima probabilidade. Foram obtidos os melhores resultados com a máxima probabilidade que permitiu definir os contornos dos vazios. Essa metodologia foi considerada eficiente para a obtenção do índice de vazios do solo e o procedimento provou ser simples e rápido. ABSTRACT: This work presents a methodological approach to obtain soil's void ratio (e) through image processing techniques. How this method enables an automatic obtaining the procedure can be considered easiest, quickest and more accurate than conventional techniques. It is based on supervisioned classification of void areas present in a soil thin section. The methodology can be shared in the following steps: a) elaboration of the thin sction from the soil sample (if the soil porosity owns na anisotropic pattern, slice sheets have to be done following voids preferential legth axis; b) thin sections are photographed and scanned in RGB digital format; c) the colored image is deparated in three grey levels images relation to Red (R), Green (G) and Blue (B); d) images are submitted to a Principal Component Analysis that permit enhacement of void areas; e) supervisioned classification of images; and f) calculation of voids. Supervisioned classification techniques used were: parallelepiped approach, minimum distance and maximum likelihood. Best results were obtained with maximum likelihood that allowed well define void contours. This methodology was considered efficient to the soil's void ratio obtaining and the procedure proved to be simple and quick. 650 $aporosity 650 $aremote sensing 650 $asoil 650 $aCerrado 650 $aPorosidade 650 $aPropriedade Físico-Química 650 $aSensoriamento Remoto 650 $aSolo 653 $aChemicophysical properties 653 $aDigital image 653 $aGeoprocessamento 653 $aIDRISI 653 $aImagem digital 653 $aÍndices de vazios 653 $aMicromorfologia 653 $aMicromorphology 653 $aSeção delgada 653 $aSolos 653 $aThin section 653 $aVoid ratio 700 1 $aCARDOSO, F. B. da F. 700 1 $aMARTINS, E. de S. 700 1 $aJUNQUEIRA, F. de F. 700 1 $aCARVALHO, A. P. F. de 700 1 $aREATTO, A. 700 1 $aGUIMARAES, R. F.
Download
Esconder MarcMostrar Marc Completo |
Registro original: |
Embrapa Cerrados (CPAC) |
|
Biblioteca |
ID |
Origem |
Tipo/Formato |
Classificação |
Cutter |
Registro |
Volume |
Status |
URL |
Voltar
|
|
| Acesso ao texto completo restrito à biblioteca da Embrapa Gado de Corte. Para informações adicionais entre em contato com cnpgc.biblioteca@embrapa.br. |
Registro Completo
Biblioteca(s): |
Embrapa Gado de Corte. |
Data corrente: |
10/08/2011 |
Data da última atualização: |
10/08/2011 |
Autoria: |
DELBEN, J. R. J.; CANDELORIO, P. D.; OLIVEIRA, F. F. DE; SPONTONI, T. A.; DELBEN, A. A. S. T.; COELHO, M. de B.; ANDRADE, L. H. C. |
Afiliação: |
J. R. J. Delben, UFMS; P. D. Candelorio, UFMS; F. F. de Oliveira, UFMS; T. A. Spontoni, UFMS; Angela A. S. T. Delben, UFMS; MARLENE DE BARROS COELHO, CNPGC; L. H. C. Andrade, UFMS. |
Título: |
Vacuum pyrolysis of Astronium urundeuva. |
Ano de publicação: |
2008 |
Fonte/Imprenta: |
Journal of Thermal Analysis and Calorimetry, v. 93, n.3, p. 915-919, 2008. |
Idioma: |
Inglês |
Conteúdo: |
Currently, there are ecological and energy crises due to the increasing demand for industrialized products and personal comfort (thermal conditioning, alimentary needs, transport demand, etc.). The consumption of fossil energy sources (coal and oil) is significant considering depleting supplies. In underdeveloped countries, native forest territory is being lost as the original forest biomass is consumed and agricultural land borders expand. The release of pollutant carbon into the atmosphere is increasing; this carbon was previously fixed in wood, oil beds and native forest. Meanwhile, the fossil reserves will be depleted in a few decades. Due to this situation, petroleum natural gas (PNG) is beginning to be used intensely worldwide, in the past it was released into the atmosphere. The development of cheap materials for large-scale permanent fixation of carbon, while adsorbing PNG for storage and transport, is desired. There are three options for storing PNG: ? the use of appropriate solvent; its drawback is the low solubility of the methane, requiring high pressures [1] ? the inclusion of composites [2]; its disadvantage is the low storage capacity ? the adsorption in porous materials [3?8]; that is the most promising mechanism ? A lot of research is focused on the development of microporous adsorbers with a large superficial area, high packing density and good mass and heat transfer properties [9, 10]. The best choice so far is activated charcoal acting as an adsorber. Such a system can store PNG at moderate pressures (3.5 MPa), compared with the high pressures (20 MPa) required for natural gas compression [11]. Its storage capacity is in the range of 300?700 Kg m?3, with the adsorbed/adsorbent volume rate varying from 101 to 172 V/V, whereas the ideal rate is around 150 V/V [4, 5, 7, 12?17]. The pyrolysis of vegetal organics is a common process for activating carbon. The activation of carbon can occur in some environments, such as vacuum, steam, and CO2, with different results on the microporosity lacking meso- and macroporosity. The maximization of the superficial area and adsorption capacity of the activated charcoal is still under study [18?20]. In this work, the pyrolysis of the Aroeira (Astronium Urundeuva), a wood of the Middle West Brazilian Biome, is presented. The samples were characterized by differential scanning calorimetry (DSC), thermogravimetric analysis (TG), Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD). MenosCurrently, there are ecological and energy crises due to the increasing demand for industrialized products and personal comfort (thermal conditioning, alimentary needs, transport demand, etc.). The consumption of fossil energy sources (coal and oil) is significant considering depleting supplies. In underdeveloped countries, native forest territory is being lost as the original forest biomass is consumed and agricultural land borders expand. The release of pollutant carbon into the atmosphere is increasing; this carbon was previously fixed in wood, oil beds and native forest. Meanwhile, the fossil reserves will be depleted in a few decades. Due to this situation, petroleum natural gas (PNG) is beginning to be used intensely worldwide, in the past it was released into the atmosphere. The development of cheap materials for large-scale permanent fixation of carbon, while adsorbing PNG for storage and transport, is desired. There are three options for storing PNG: ? the use of appropriate solvent; its drawback is the low solubility of the methane, requiring high pressures [1] ? the inclusion of composites [2]; its disadvantage is the low storage capacity ? the adsorption in porous materials [3?8]; that is the most promising mechanism ? A lot of research is focused on the development of microporous adsorbers with a large superficial area, high packing density and good mass and heat transfer properties [9, 10]. The best choice so far is activated charcoal acting as an adsorber. Suc... Mostrar Tudo |
Palavras-Chave: |
Pirólise. |
Thesagro: |
Aroeira; Astronium Urundeuva; Madeira. |
Categoria do assunto: |
W Química e Física |
Marc: |
LEADER 03174naa a2200241 a 4500 001 1897692 005 2011-08-10 008 2008 bl uuuu u00u1 u #d 100 1 $aDELBEN, J. R. J. 245 $aVacuum pyrolysis of Astronium urundeuva.$h[electronic resource] 260 $c2008 520 $aCurrently, there are ecological and energy crises due to the increasing demand for industrialized products and personal comfort (thermal conditioning, alimentary needs, transport demand, etc.). The consumption of fossil energy sources (coal and oil) is significant considering depleting supplies. In underdeveloped countries, native forest territory is being lost as the original forest biomass is consumed and agricultural land borders expand. The release of pollutant carbon into the atmosphere is increasing; this carbon was previously fixed in wood, oil beds and native forest. Meanwhile, the fossil reserves will be depleted in a few decades. Due to this situation, petroleum natural gas (PNG) is beginning to be used intensely worldwide, in the past it was released into the atmosphere. The development of cheap materials for large-scale permanent fixation of carbon, while adsorbing PNG for storage and transport, is desired. There are three options for storing PNG: ? the use of appropriate solvent; its drawback is the low solubility of the methane, requiring high pressures [1] ? the inclusion of composites [2]; its disadvantage is the low storage capacity ? the adsorption in porous materials [3?8]; that is the most promising mechanism ? A lot of research is focused on the development of microporous adsorbers with a large superficial area, high packing density and good mass and heat transfer properties [9, 10]. The best choice so far is activated charcoal acting as an adsorber. Such a system can store PNG at moderate pressures (3.5 MPa), compared with the high pressures (20 MPa) required for natural gas compression [11]. Its storage capacity is in the range of 300?700 Kg m?3, with the adsorbed/adsorbent volume rate varying from 101 to 172 V/V, whereas the ideal rate is around 150 V/V [4, 5, 7, 12?17]. The pyrolysis of vegetal organics is a common process for activating carbon. The activation of carbon can occur in some environments, such as vacuum, steam, and CO2, with different results on the microporosity lacking meso- and macroporosity. The maximization of the superficial area and adsorption capacity of the activated charcoal is still under study [18?20]. In this work, the pyrolysis of the Aroeira (Astronium Urundeuva), a wood of the Middle West Brazilian Biome, is presented. The samples were characterized by differential scanning calorimetry (DSC), thermogravimetric analysis (TG), Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD). 650 $aAroeira 650 $aAstronium Urundeuva 650 $aMadeira 653 $aPirólise 700 1 $aCANDELORIO, P. D. 700 1 $aOLIVEIRA, F. F. DE 700 1 $aSPONTONI, T. A. 700 1 $aDELBEN, A. A. S. T. 700 1 $aCOELHO, M. de B. 700 1 $aANDRADE, L. H. C. 773 $tJournal of Thermal Analysis and Calorimetry$gv. 93, n.3, p. 915-919, 2008.
Download
Esconder MarcMostrar Marc Completo |
Registro original: |
Embrapa Gado de Corte (CNPGC) |
|
Biblioteca |
ID |
Origem |
Tipo/Formato |
Classificação |
Cutter |
Registro |
Volume |
Status |
Fechar
|
Nenhum registro encontrado para a expressão de busca informada. |
|
|