|
|
Registro Completo |
Biblioteca(s): |
Embrapa Amazônia Ocidental; Embrapa Tabuleiros Costeiros. |
Data corrente: |
01/03/1996 |
Data da última atualização: |
02/04/2018 |
Tipo da produção científica: |
Comunicado Técnico/Recomendações Técnicas |
Autoria: |
VIEIRA NETO, R. D. |
Afiliação: |
RAUL DANTAS VIEIRA, Contrato EMBRAPA / EMDAGRO. |
Título: |
Ocorrência do mosaico do mamoeiro em Sergipe. |
Ano de publicação: |
1992 |
Fonte/Imprenta: |
Aracaju: EMBRAPA-CNPCo, 1992. |
Páginas: |
3 p. |
Série: |
(EMBRAPA-CNPCo. Comunicado Técnico, 37). |
ISSN: |
0102-9967 |
Idioma: |
Português |
Conteúdo: |
Procedimentos que deverão ser adotados em áreas onde ocorre o mosaico do mamoeiro. |
Palavras-Chave: |
Brasil; Mamoeiro; Sergipe. |
Thesagro: |
Doença de Planta; Fruticultura; Mamão; Mosaico; Vírus. |
Categoria do assunto: |
-- |
URL: |
https://ainfo.cnptia.embrapa.br/digital/bitstream/item/174847/1/Mosaico0001.pdf
|
Marc: |
LEADER 00676nam a2200241 a 4500 001 1356802 005 2018-04-02 008 1992 bl uuuu u0uu1 u #d 022 $a0102-9967 100 1 $aVIEIRA NETO, R. D. 245 $aOcorrência do mosaico do mamoeiro em Sergipe. 260 $aAracaju: EMBRAPA-CNPCo$c1992 300 $a3 p. 490 $a(EMBRAPA-CNPCo. Comunicado Técnico, 37). 520 $aProcedimentos que deverão ser adotados em áreas onde ocorre o mosaico do mamoeiro. 650 $aDoença de Planta 650 $aFruticultura 650 $aMamão 650 $aMosaico 650 $aVírus 653 $aBrasil 653 $aMamoeiro 653 $aSergipe
Download
Esconder MarcMostrar Marc Completo |
Registro original: |
Embrapa Tabuleiros Costeiros (CPATC) |
|
Biblioteca |
ID |
Origem |
Tipo/Formato |
Classificação |
Cutter |
Registro |
Volume |
Status |
URL |
Voltar
|
|
Registro Completo
Biblioteca(s): |
Embrapa Milho e Sorgo. |
Data corrente: |
23/08/2022 |
Data da última atualização: |
24/08/2022 |
Tipo da produção científica: |
Artigo em Periódico Indexado |
Circulação/Nível: |
B - 4 |
Autoria: |
COSTA, T. C. e C. da; FRANÇA, L.; SANTOS, T.; RAMOS, L. B.; CAMPANHA, M. M. |
Afiliação: |
THOMAZ CORREA E CASTRO DA COSTA, CNPMS; LUIZ FRANÇA, SIG Soluções Ltda; TIAGO SANTOS, SIG Soluções Ltda; LUCAS BARBOSA RAMOS, Universidade Federal São João del-Rei; MONICA MATOSO CAMPANHA, CNPMS. |
Título: |
CalcMadeira: software for estimating lumber production. |
Ano de publicação: |
2022 |
Fonte/Imprenta: |
Global Journal of Science Frontier Research, v. 22, n. 2, p. 1-17, 2022. |
Idioma: |
Inglês |
Conteúdo: |
One information that is generally not used but is still essential to the economic evaluation and wood yield of the sawmill production chain is the quantification of lumber a priori. The few applications that provide a solution to this problem work with one log at a time and generally use optimization techniques instead of cut pattern models. The software developed for this work uses trigonometric rules, applying the circumscribed square (block), longitudinal (or tangential), log rotation, and radial cut patterns to help a producer sell a tree not in cubic meters but as a function of the pieces obtained from trees. Six tests were performed using trees and individual logs. The comparison between the calculated and milled or drawing pieces was presented for each model. The total errors obtained were approximately 2% for priority pieces. The best accuracy for the number and volume of the lumber pieces was 2.2% and -5.4%, respectively, obtained with a 30o angle of the slab (waste wood) and 0.60 to the proportion of the radius parameters in the model that rotates the log. The total calculated and observed piece width distributions were statistically equal in the radial model. This application requires observation of the milling operation while monitoring parameters in a heterogeneous sample of wooden logs to obtain the best results. |
Palavras-Chave: |
Padrão de corte; Tronco. |
Thesagro: |
Madeira; Serra. |
Categoria do assunto: |
K Ciência Florestal e Produtos de Origem Vegetal |
URL: |
https://ainfo.cnptia.embrapa.br/digital/bitstream/doc/1145671/1/CalcMadeira-software-for-estimating-lumber-production.pdf
|
Marc: |
LEADER 01947naa a2200217 a 4500 001 2145671 005 2022-08-24 008 2022 bl uuuu u00u1 u #d 100 1 $aCOSTA, T. C. e C. da 245 $aCalcMadeira$bsoftware for estimating lumber production.$h[electronic resource] 260 $c2022 520 $aOne information that is generally not used but is still essential to the economic evaluation and wood yield of the sawmill production chain is the quantification of lumber a priori. The few applications that provide a solution to this problem work with one log at a time and generally use optimization techniques instead of cut pattern models. The software developed for this work uses trigonometric rules, applying the circumscribed square (block), longitudinal (or tangential), log rotation, and radial cut patterns to help a producer sell a tree not in cubic meters but as a function of the pieces obtained from trees. Six tests were performed using trees and individual logs. The comparison between the calculated and milled or drawing pieces was presented for each model. The total errors obtained were approximately 2% for priority pieces. The best accuracy for the number and volume of the lumber pieces was 2.2% and -5.4%, respectively, obtained with a 30o angle of the slab (waste wood) and 0.60 to the proportion of the radius parameters in the model that rotates the log. The total calculated and observed piece width distributions were statistically equal in the radial model. This application requires observation of the milling operation while monitoring parameters in a heterogeneous sample of wooden logs to obtain the best results. 650 $aMadeira 650 $aSerra 653 $aPadrão de corte 653 $aTronco 700 1 $aFRANÇA, L. 700 1 $aSANTOS, T. 700 1 $aRAMOS, L. B. 700 1 $aCAMPANHA, M. M. 773 $tGlobal Journal of Science Frontier Research$gv. 22, n. 2, p. 1-17, 2022.
Download
Esconder MarcMostrar Marc Completo |
Registro original: |
Embrapa Milho e Sorgo (CNPMS) |
|
Biblioteca |
ID |
Origem |
Tipo/Formato |
Classificação |
Cutter |
Registro |
Volume |
Status |
Fechar
|
Expressão de busca inválida. Verifique!!! |
|
|