|
Registro Completo |
|
Biblioteca(s): |
Embrapa Instrumentação. |
|
Data corrente: |
27/12/2022 |
|
Data da última atualização: |
10/12/2024 |
|
Tipo da produção científica: |
Artigo em Periódico Indexado |
|
Autoria: |
DAWSON, M.; RIBEIRO, C.; MORELLI, M. R. |
|
Afiliação: |
CAUE RIBEIRO DE OLIVEIRA, CNPDIA. |
|
Título: |
Synthesis and characterization of tin halide perovskites based on different tin(II) precursors. |
|
Ano de publicação: |
2022 |
|
Fonte/Imprenta: |
Materials Letters, v. 308, a131163, 2022. |
|
Páginas: |
1 - 4 |
|
ISSN: |
0167-577X |
|
DOI: |
www.elsevier.com/locate/matlet https://doi.org/10.1016/j.matlet.2021.131163 |
|
Idioma: |
Inglês |
|
Conteúdo: |
Tin halide perovskite (CH3NH3SnI3) is an environmentally-friendly substitute for lead perovskite. A common precursor utilized for CH3NH3SnI3 synthesis is SnI2 despite being expensive and impractical for large scale synthesis. Also, SnI2 is prone to tin(IV) contamination, the leading cause of instability and poor performance. Here, tin(II) sulfate (SnSO4) and tin(II) octoate (C16H30O4Sn) are introduced as cheaper and stable precursors. Using the precursors including SnI2, perovskite films were synthesized by the one-step method. X-ray diffraction confirmed perovskite formation irrespective of tin precursor. However, scanning electron microscopy showed a difference in morphology. The samples synthesized with SnSO4 and C16H30O4Sn presented higher bandgaps of 1.42 eV and 1.37 eV, respectively, compared to SnI2 (1.30 eV). Elemental mapping showed that sulfur and carbon are not completely eliminated, thus must be considered when choosing non-halide precursors. |
|
Palavras-Chave: |
Lead-free perovskite; Non-halide tin precursor; Tin halide perovskite; Tin octoate. |
|
Categoria do assunto: |
-- |
|
Marc: |
LEADER 01696naa a2200229 a 4500
001 2150368
005 2024-12-10
008 2022 bl uuuu u00u1 u #d
022 $a0167-577X
024 7 $awww.elsevier.com/locate/matlet https://doi.org/10.1016/j.matlet.2021.131163$2DOI
100 1 $aDAWSON, M.
245 $aSynthesis and characterization of tin halide perovskites based on different tin(II) precursors.$h[electronic resource]
260 $c2022
300 $a1 - 4
520 $aTin halide perovskite (CH3NH3SnI3) is an environmentally-friendly substitute for lead perovskite. A common precursor utilized for CH3NH3SnI3 synthesis is SnI2 despite being expensive and impractical for large scale synthesis. Also, SnI2 is prone to tin(IV) contamination, the leading cause of instability and poor performance. Here, tin(II) sulfate (SnSO4) and tin(II) octoate (C16H30O4Sn) are introduced as cheaper and stable precursors. Using the precursors including SnI2, perovskite films were synthesized by the one-step method. X-ray diffraction confirmed perovskite formation irrespective of tin precursor. However, scanning electron microscopy showed a difference in morphology. The samples synthesized with SnSO4 and C16H30O4Sn presented higher bandgaps of 1.42 eV and 1.37 eV, respectively, compared to SnI2 (1.30 eV). Elemental mapping showed that sulfur and carbon are not completely eliminated, thus must be considered when choosing non-halide precursors.
653 $aLead-free perovskite
653 $aNon-halide tin precursor
653 $aTin halide perovskite
653 $aTin octoate
700 1 $aRIBEIRO, C.
700 1 $aMORELLI, M. R.
773 $tMaterials Letters$gv. 308, a131163, 2022.
Download
Esconder MarcMostrar Marc Completo |
|
Registro original: |
Embrapa Instrumentação (CNPDIA) |
|
