|
|
![](/consulta/web/img/deny.png) | Acesso ao texto completo restrito à biblioteca da Embrapa Solos. Para informações adicionais entre em contato com cnps.biblioteca@embrapa.br. |
Registro Completo |
Biblioteca(s): |
Embrapa Solos. |
Data corrente: |
20/02/2020 |
Data da última atualização: |
21/07/2020 |
Tipo da produção científica: |
Artigo em Periódico Indexado |
Autoria: |
CERNICCHIARO, G.; BARMAK, R.; TEIXEIRA, W. G. |
Afiliação: |
GERALDO CERNICCHIARO, CBPF; RAFAEL BARMAK, CBPF; WENCESLAU GERALDES TEIXEIRA, CNPS. |
Título: |
Digital interface device for field soil hydraulic conductivity measurement. |
Ano de publicação: |
2019 |
Fonte/Imprenta: |
Journal of Hydrology, v. 576, p. 58-64, Sept. 2019. |
DOI: |
https://doi.org/10.1016/j.jhydrol.2019.06.034 |
Idioma: |
Inglês |
Conteúdo: |
Accurate and reliable measurements of field-saturated hydraulic conductivity (Kfs) are essential for accurate determinations of soil and solution water fluxes. Kfs is a crucial parameter to design drainage, irrigation systems and many other environmental, agricultural and industrial installations Reynolds et al. (1983). There is a high demand for Kfs data. Its evaluation is preferable to be done in situ. A popular device to measure the Kfs is the head well permeameter such as the Guelph Permeameter. However, it is an analog equipment based on a Mariotte's bottle that requires full attention and training to be manually operated, where the reading of the flux values (Q, in cm3/min) is time-consuming and costly. In this paper, we describe a device, with a digital readout, to measure the steady state rate of water level change Rs, in order to obtain Qs and Kfs. The method is based on the monitoring of the vacuum variation of the Mariotte's bottle. Our results show no statistical differences between the measurements values of manual and automatic recording using paired t-test. In addition, our device identifies measurement artifacts due to the variation of the ambient temperature during measurements. The necessary accuracy for the digitalization method becomes feasible due to the availability of accurate piezoelectric transducers (Micro-Electro-Mechanical System - MEMS). Automating and digitizing these processes will reduce time, costs and increase the accuracy and availability of data. The device can be directly adapted to commercially available head well permeameters as shown in our experimental results. The more widespread use and understanding of this parameter can improve the rational use of water for irrigation and use in risk models for forecasting available soil water and therefore crop productivity. MenosAccurate and reliable measurements of field-saturated hydraulic conductivity (Kfs) are essential for accurate determinations of soil and solution water fluxes. Kfs is a crucial parameter to design drainage, irrigation systems and many other environmental, agricultural and industrial installations Reynolds et al. (1983). There is a high demand for Kfs data. Its evaluation is preferable to be done in situ. A popular device to measure the Kfs is the head well permeameter such as the Guelph Permeameter. However, it is an analog equipment based on a Mariotte's bottle that requires full attention and training to be manually operated, where the reading of the flux values (Q, in cm3/min) is time-consuming and costly. In this paper, we describe a device, with a digital readout, to measure the steady state rate of water level change Rs, in order to obtain Qs and Kfs. The method is based on the monitoring of the vacuum variation of the Mariotte's bottle. Our results show no statistical differences between the measurements values of manual and automatic recording using paired t-test. In addition, our device identifies measurement artifacts due to the variation of the ambient temperature during measurements. The necessary accuracy for the digitalization method becomes feasible due to the availability of accurate piezoelectric transducers (Micro-Electro-Mechanical System - MEMS). Automating and digitizing these processes will reduce time, costs and increase the accuracy and availability o... Mostrar Tudo |
Palavras-Chave: |
Condutividade hidráulica saturada; Instrumentação; Permeâmetro; Sensor. |
Thesagro: |
Condutividade Hidráulica; Solo. |
Thesaurus Nal: |
Instrumentation; Permeameters; Saturated hydraulic conductivity; Sensors (equipment). |
Categoria do assunto: |
P Recursos Naturais, Ciências Ambientais e da Terra |
Marc: |
LEADER 02681naa a2200277 a 4500 001 2120445 005 2020-07-21 008 2019 bl uuuu u00u1 u #d 024 7 $ahttps://doi.org/10.1016/j.jhydrol.2019.06.034$2DOI 100 1 $aCERNICCHIARO, G. 245 $aDigital interface device for field soil hydraulic conductivity measurement.$h[electronic resource] 260 $c2019 520 $aAccurate and reliable measurements of field-saturated hydraulic conductivity (Kfs) are essential for accurate determinations of soil and solution water fluxes. Kfs is a crucial parameter to design drainage, irrigation systems and many other environmental, agricultural and industrial installations Reynolds et al. (1983). There is a high demand for Kfs data. Its evaluation is preferable to be done in situ. A popular device to measure the Kfs is the head well permeameter such as the Guelph Permeameter. However, it is an analog equipment based on a Mariotte's bottle that requires full attention and training to be manually operated, where the reading of the flux values (Q, in cm3/min) is time-consuming and costly. In this paper, we describe a device, with a digital readout, to measure the steady state rate of water level change Rs, in order to obtain Qs and Kfs. The method is based on the monitoring of the vacuum variation of the Mariotte's bottle. Our results show no statistical differences between the measurements values of manual and automatic recording using paired t-test. In addition, our device identifies measurement artifacts due to the variation of the ambient temperature during measurements. The necessary accuracy for the digitalization method becomes feasible due to the availability of accurate piezoelectric transducers (Micro-Electro-Mechanical System - MEMS). Automating and digitizing these processes will reduce time, costs and increase the accuracy and availability of data. The device can be directly adapted to commercially available head well permeameters as shown in our experimental results. The more widespread use and understanding of this parameter can improve the rational use of water for irrigation and use in risk models for forecasting available soil water and therefore crop productivity. 650 $aInstrumentation 650 $aPermeameters 650 $aSaturated hydraulic conductivity 650 $aSensors (equipment) 650 $aCondutividade Hidráulica 650 $aSolo 653 $aCondutividade hidráulica saturada 653 $aInstrumentação 653 $aPermeâmetro 653 $aSensor 700 1 $aBARMAK, R. 700 1 $aTEIXEIRA, W. G. 773 $tJournal of Hydrology$gv. 576, p. 58-64, Sept. 2019.
Download
Esconder MarcMostrar Marc Completo |
Registro original: |
Embrapa Solos (CNPS) |
|
Biblioteca |
ID |
Origem |
Tipo/Formato |
Classificação |
Cutter |
Registro |
Volume |
Status |
URL |
Voltar
|
|
Registro Completo
Biblioteca(s): |
Embrapa Cerrados. |
Data corrente: |
23/12/2016 |
Data da última atualização: |
23/12/2016 |
Tipo da produção científica: |
Artigo em Periódico Indexado |
Circulação/Nível: |
B - 3 |
Autoria: |
VENDRAME, P. R. S.; EBERHARDT, D. N.; BRITO, O. R.; MARCHAO, R. L.; QUANTIN, C.; BECQUER, T. |
Afiliação: |
Pedro Rodolfo Siqueira Vendrame, Universidade Estadual de Londrina; Diogo Néia Eberhardt, Escola Superior de Agricultura Luiz de Queiroz; Osmar Rodrigues Brito, Universidade Estadual de Londrina; ROBELIO LEANDRO MARCHAO, CPAC; Cécile Quantin, Université Paris-Sud 11; Thierry Becquer, Institut de Recherche pour le Développement. |
Título: |
Formas de ferro e alumínio e suas relações com textura, mineralogia e carbono orgânico em Latossolos do Cerrado. |
Ano de publicação: |
2011 |
Fonte/Imprenta: |
Semina: Ciências Agrárias, Londrina, v. 32, suplemento 1, p. 1657-1666, 2011. |
DOI: |
10.5433/1679-0359.2011v32Suplp1657 |
Idioma: |
Português |
Notas: |
Título em inglês: Iron and aluminum forms and their relationship with texture, mineralogy and organic carbon in the Cerrado Oxisol. |
Conteúdo: |
Os Latossolos da região do Cerrado apresentam mineralogia da fração argila relativamente simples, sendo constituídos principalmente por caulinita e óxidos de ferro e de alumínio. O objetivo deste trabalho foi realizar extrações sequênciais de ferro e de alumínio e relacioná-los à mineralogia, textura e teores de carbono orgânico em Latossolos da região do Cerrado. Coletaram-se 35 amostras na camada de 0-20 cm de Latossolos sob pastagem da região do Cerrado. Os teores de ferro e de alumínio extraídos pelo ataque total, ditionito-citrato-bicarbonato de sódio, oxalato ácido de amônia e pirofosfato de sódio foram analisados de acordo com a classe textural através do teste não paramétrico de Kruskal-Wallis. Em seguida estes dados foram relacionados com a mineralogia e o carbono orgânico por meio de uma análise de componentes principais. Independentemente da classe textural, os óxidos de ferro de alto grau de cristalinidade representaram a principal forma de ferro e se correlacionam positivamente com os teores totais de ferro. Os óxidos de alumínio apresentaram maior afinidade ao carbono orgânico do que os óxidos de ferro. Os teores de ferro e alumínio extraídos pelo pirofosfato foram estreitamente relacionados ao pH dos solos. ABSTRACT: The Oxisols of the Cerrado region have a simple mineralogy, and are composed mainly of kaolinite and iron and aluminium oxides. The aim of this work was to perform a sequential extraction of iron and aluminium and to relate them to texture, mineralogy and organic carbon in Oxisols of the Cerrado region. The soil samples, 35 in total, were taken from the 0?20 cm layer in Oxisols under pasture located in the Brazilian Cerrado Region. The levels of iron and aluminum extracted by full attack, dithionite-citrate-bicarbonate, ammonium oxalate and sodium pyrophosphate were analyzed according to the textural classes using the Kruskal-Wallis nonparametric test. Then these data were related to the mineralogy and organic carbon through a principal component analysis. Whatever the textures, iron oxides of high degree of crystallinity were the main form of iron and are positively correlated with the iron total content. The aluminum oxides have a high affinity to organic carbon than iron oxides. The levels of iron and aluminum extracted by sodium pyrophosphate were closely related to soil pH. MenosOs Latossolos da região do Cerrado apresentam mineralogia da fração argila relativamente simples, sendo constituídos principalmente por caulinita e óxidos de ferro e de alumínio. O objetivo deste trabalho foi realizar extrações sequênciais de ferro e de alumínio e relacioná-los à mineralogia, textura e teores de carbono orgânico em Latossolos da região do Cerrado. Coletaram-se 35 amostras na camada de 0-20 cm de Latossolos sob pastagem da região do Cerrado. Os teores de ferro e de alumínio extraídos pelo ataque total, ditionito-citrato-bicarbonato de sódio, oxalato ácido de amônia e pirofosfato de sódio foram analisados de acordo com a classe textural através do teste não paramétrico de Kruskal-Wallis. Em seguida estes dados foram relacionados com a mineralogia e o carbono orgânico por meio de uma análise de componentes principais. Independentemente da classe textural, os óxidos de ferro de alto grau de cristalinidade representaram a principal forma de ferro e se correlacionam positivamente com os teores totais de ferro. Os óxidos de alumínio apresentaram maior afinidade ao carbono orgânico do que os óxidos de ferro. Os teores de ferro e alumínio extraídos pelo pirofosfato foram estreitamente relacionados ao pH dos solos. ABSTRACT: The Oxisols of the Cerrado region have a simple mineralogy, and are composed mainly of kaolinite and iron and aluminium oxides. The aim of this work was to perform a sequential extraction of iron and aluminium and to relate them to texture, minera... Mostrar Tudo |
Palavras-Chave: |
Cristalinidade; Extrações sequênciais; Latossolos; Óxidos de ferro e alumínio. |
Thesagro: |
Cerrado. |
Categoria do assunto: |
P Recursos Naturais, Ciências Ambientais e da Terra |
URL: |
https://ainfo.cnptia.embrapa.br/digital/bitstream/item/152253/1/Vendrame-et-al-2011.pdf
|
Marc: |
LEADER 03327naa a2200265 a 4500 001 2059220 005 2016-12-23 008 2011 bl uuuu u00u1 u #d 024 7 $a10.5433/1679-0359.2011v32Suplp1657$2DOI 100 1 $aVENDRAME, P. R. S. 245 $aFormas de ferro e alumínio e suas relações com textura, mineralogia e carbono orgânico em Latossolos do Cerrado. 260 $c2011 500 $aTítulo em inglês: Iron and aluminum forms and their relationship with texture, mineralogy and organic carbon in the Cerrado Oxisol. 520 $aOs Latossolos da região do Cerrado apresentam mineralogia da fração argila relativamente simples, sendo constituídos principalmente por caulinita e óxidos de ferro e de alumínio. O objetivo deste trabalho foi realizar extrações sequênciais de ferro e de alumínio e relacioná-los à mineralogia, textura e teores de carbono orgânico em Latossolos da região do Cerrado. Coletaram-se 35 amostras na camada de 0-20 cm de Latossolos sob pastagem da região do Cerrado. Os teores de ferro e de alumínio extraídos pelo ataque total, ditionito-citrato-bicarbonato de sódio, oxalato ácido de amônia e pirofosfato de sódio foram analisados de acordo com a classe textural através do teste não paramétrico de Kruskal-Wallis. Em seguida estes dados foram relacionados com a mineralogia e o carbono orgânico por meio de uma análise de componentes principais. Independentemente da classe textural, os óxidos de ferro de alto grau de cristalinidade representaram a principal forma de ferro e se correlacionam positivamente com os teores totais de ferro. Os óxidos de alumínio apresentaram maior afinidade ao carbono orgânico do que os óxidos de ferro. Os teores de ferro e alumínio extraídos pelo pirofosfato foram estreitamente relacionados ao pH dos solos. ABSTRACT: The Oxisols of the Cerrado region have a simple mineralogy, and are composed mainly of kaolinite and iron and aluminium oxides. The aim of this work was to perform a sequential extraction of iron and aluminium and to relate them to texture, mineralogy and organic carbon in Oxisols of the Cerrado region. The soil samples, 35 in total, were taken from the 0?20 cm layer in Oxisols under pasture located in the Brazilian Cerrado Region. The levels of iron and aluminum extracted by full attack, dithionite-citrate-bicarbonate, ammonium oxalate and sodium pyrophosphate were analyzed according to the textural classes using the Kruskal-Wallis nonparametric test. Then these data were related to the mineralogy and organic carbon through a principal component analysis. Whatever the textures, iron oxides of high degree of crystallinity were the main form of iron and are positively correlated with the iron total content. The aluminum oxides have a high affinity to organic carbon than iron oxides. The levels of iron and aluminum extracted by sodium pyrophosphate were closely related to soil pH. 650 $aCerrado 653 $aCristalinidade 653 $aExtrações sequênciais 653 $aLatossolos 653 $aÓxidos de ferro e alumínio 700 1 $aEBERHARDT, D. N. 700 1 $aBRITO, O. R. 700 1 $aMARCHAO, R. L. 700 1 $aQUANTIN, C. 700 1 $aBECQUER, T. 773 $tSemina: Ciências Agrárias, Londrina$gv. 32, suplemento 1, p. 1657-1666, 2011.
Download
Esconder MarcMostrar Marc Completo |
Registro original: |
Embrapa Cerrados (CPAC) |
|
Biblioteca |
ID |
Origem |
Tipo/Formato |
Classificação |
Cutter |
Registro |
Volume |
Status |
Fechar
|
Nenhum registro encontrado para a expressão de busca informada. |
|
|