|
|
Registro Completo |
Biblioteca(s): |
Embrapa Amazônia Ocidental. |
Data corrente: |
05/10/1999 |
Data da última atualização: |
28/12/2018 |
Tipo da produção científica: |
Artigo em Anais de Congresso |
Autoria: |
AZEVEDO, C. P. de; DUNISCH, O.; FRANÇA, M. B.; NEVES, A. C. C. das; LEEUWEN, J. van. |
Afiliação: |
CELSO PAULO DE AZEVEDO, CPAA. |
Título: |
Wood characteristics of Ceiba pentandra cultivated in upland and floodplain ecosystems. |
Ano de publicação: |
1998 |
Fonte/Imprenta: |
In: SHIFT - WORKSHOP, 3., 1998, Manaus. Proceedings... Bonn: BMBF, 1998. |
Páginas: |
p. 419-431. |
Idioma: |
Inglês |
Conteúdo: |
The present work carried out with native, adult and young trees of the species Ceiba pentrandra (sumauma), cultivated in flood plains (varzea) and in upland (terra firme) ecosystems. The objective was to obtain information about growth patterns of the species and to correlate them with different environmental conditions (varzea e terra firme), as well as to investigate anatomical and physical parameters of the wood. The wood quality of adult native trees was compared with the wood quality of young trees cultivated on varzea and terra firme. Investigations were carried out on the radial variations of density and anisotropy, as well as on the wood anatomical structure on the pith-bark direction on the samples of wood taken at breast height (DBH). From the results obtained, it can be concluded that the cultivated trees on the varzea and in terra firme ecosystems, as well as the native trees, presented an increase of density from pith to bark. The sctructural density of the cultivated trees at the terra firme ecosystem was higher, followed by the trees cultivated at the varzea, when compared with native sumauma. The anisotropy contraction index indicates that sumauma is highly dimensionally unstable. Therefore, its range of use in the area of construction is limited. |
Palavras-Chave: |
Amazonas; Brasil; Chemicophysical properties; Manaus; Sumauma. |
Thesagro: |
Anatomia; Ceiba Pentandra; Propriedade Físico-Química. |
Thesaurus Nal: |
plant anatomy. |
Categoria do assunto: |
-- |
URL: |
https://ainfo.cnptia.embrapa.br/digital/bitstream/item/181329/1/ID-4191-419-431.pdf
|
Marc: |
LEADER 02073nam a2200277 a 4500 001 1668402 005 2018-12-28 008 1998 bl uuuu u00u1 u #d 100 1 $aAZEVEDO, C. P. de 245 $aWood characteristics of Ceiba pentandra cultivated in upland and floodplain ecosystems. 260 $aIn: SHIFT - WORKSHOP, 3., 1998, Manaus. Proceedings... Bonn: BMBF$c1998 300 $ap. 419-431. 520 $aThe present work carried out with native, adult and young trees of the species Ceiba pentrandra (sumauma), cultivated in flood plains (varzea) and in upland (terra firme) ecosystems. The objective was to obtain information about growth patterns of the species and to correlate them with different environmental conditions (varzea e terra firme), as well as to investigate anatomical and physical parameters of the wood. The wood quality of adult native trees was compared with the wood quality of young trees cultivated on varzea and terra firme. Investigations were carried out on the radial variations of density and anisotropy, as well as on the wood anatomical structure on the pith-bark direction on the samples of wood taken at breast height (DBH). From the results obtained, it can be concluded that the cultivated trees on the varzea and in terra firme ecosystems, as well as the native trees, presented an increase of density from pith to bark. The sctructural density of the cultivated trees at the terra firme ecosystem was higher, followed by the trees cultivated at the varzea, when compared with native sumauma. The anisotropy contraction index indicates that sumauma is highly dimensionally unstable. Therefore, its range of use in the area of construction is limited. 650 $aplant anatomy 650 $aAnatomia 650 $aCeiba Pentandra 650 $aPropriedade Físico-Química 653 $aAmazonas 653 $aBrasil 653 $aChemicophysical properties 653 $aManaus 653 $aSumauma 700 1 $aDUNISCH, O. 700 1 $aFRANÇA, M. B. 700 1 $aNEVES, A. C. C. das 700 1 $aLEEUWEN, J. van
Download
Esconder MarcMostrar Marc Completo |
Registro original: |
Embrapa Amazônia Ocidental (CPAA) |
|
Biblioteca |
ID |
Origem |
Tipo/Formato |
Classificação |
Cutter |
Registro |
Volume |
Status |
URL |
Voltar
|
|
| Acesso ao texto completo restrito à biblioteca da Embrapa Instrumentação. Para informações adicionais entre em contato com cnpdia.biblioteca@embrapa.br. |
Registro Completo
Biblioteca(s): |
Embrapa Instrumentação. |
Data corrente: |
19/10/2021 |
Data da última atualização: |
09/06/2022 |
Tipo da produção científica: |
Artigo em Periódico Indexado |
Circulação/Nível: |
A - 1 |
Autoria: |
SOARES, J. C.; SOARES, A. C.; RODRIGUES, V. C.; OITICICA, P. R. A.; RAYMUNDO-PEREIRA, P. A.; BOTT-NETO, J. L.; BUSCAGLIA, L. A.; CASTRO, L. D. C. de; RIBAS, L. C.; SCABINI, L.; BRAZACA, L. C.; CORREA, D. S.; MATTOSO, L. H. C.; OLIVEIRA, M. C. F. de; CARVALHO, A. C. P. L. de; CARRILHO, E.; BRUNO, O. M.; MELENDEZ, M. E.; OLIVEIRA JR, O. N. |
Afiliação: |
DANIEL SOUZA CORREA, CNPDIA; LUIZ HENRIQUE CAPPARELLI MATTOSO, CNPDIA. |
Título: |
Detection of a SARS-CoV-2 sequence with genosensors using data analysis based on information visualization and machine learning techniques. |
Ano de publicação: |
2021 |
Fonte/Imprenta: |
Materials Chemistry Frontiers, v. 5, 2021. |
Páginas: |
5658-5670 |
DOI: |
10.1039/d1qm00665g |
Idioma: |
Português |
Conteúdo: |
We report on genosensors to detect an ssDNA sequence from the SARS-CoV-2 genome, which mimics the GU280 gp10 gene (coding the viral nucleocapsid phosphoprotein), using four distinct principles of detection and treating the data with information visualization and machine learning techniques. Genosensors were fabricated on either gold (Au) interdigitated electrodes for electrical and electrochemical measurements or on Au nanoparticles on a glass slide for optical measurements. They contained a matrix of 11-mercaptoundecanoic acid (11-MUA) self-assembled monolayer (SAM) onto which a layer of capture probe (cpDNA) sequence was immobilized. Detection was performed using electrical and electrochemical impedance spectroscopies and localized surface plasmon resonance (LSPR). The highest sensitivity was reached with impedance spectroscopy, including using a low-cost (US$ 100) homemade impedance analyzer. Complementary ssDNA sequences were detected with a detection limit of 0.5 aM (0.3 copy per mL). This performance may be attributed to the high sensitivity of the electrical impedance technique combined with an appropriate arrangement of the sequences on the electrodes and hybridization between the complementary sequences, as inferred from polarizationmodulated infrared reflection absorption spectroscopy (PM-IRRAS). The selectivity of the genosensor was confirmed by plotting the impedance spectroscopy data with a multidimensional projection technique (interactive document mapping, IDMAP), where a clear separation was observed among the samples of the complementary DNA sequence at various concentrations and from buffer samples containing a non-complementary sequence and other DNA biomarkers. The diagnosis of SARS-CoV-2 mimicking sequences was also achieved with machine learning techniques applied to scanning electron microscope images taken from genosensors exposed to distinct concentrations of the complementary ssDNA sequences. In summary, the genosensors proposed here are promising for detecting SARS-CoV2 genetic material (RNA) in biological fluids in point-of-care settings MenosWe report on genosensors to detect an ssDNA sequence from the SARS-CoV-2 genome, which mimics the GU280 gp10 gene (coding the viral nucleocapsid phosphoprotein), using four distinct principles of detection and treating the data with information visualization and machine learning techniques. Genosensors were fabricated on either gold (Au) interdigitated electrodes for electrical and electrochemical measurements or on Au nanoparticles on a glass slide for optical measurements. They contained a matrix of 11-mercaptoundecanoic acid (11-MUA) self-assembled monolayer (SAM) onto which a layer of capture probe (cpDNA) sequence was immobilized. Detection was performed using electrical and electrochemical impedance spectroscopies and localized surface plasmon resonance (LSPR). The highest sensitivity was reached with impedance spectroscopy, including using a low-cost (US$ 100) homemade impedance analyzer. Complementary ssDNA sequences were detected with a detection limit of 0.5 aM (0.3 copy per mL). This performance may be attributed to the high sensitivity of the electrical impedance technique combined with an appropriate arrangement of the sequences on the electrodes and hybridization between the complementary sequences, as inferred from polarizationmodulated infrared reflection absorption spectroscopy (PM-IRRAS). The selectivity of the genosensor was confirmed by plotting the impedance spectroscopy data with a multidimensional projection technique (interactive document mapping, IDM... Mostrar Tudo |
Palavras-Chave: |
Genetic material (RNA); SsDNA; Viral nucleocapsid phosphoprotein). |
Categoria do assunto: |
-- |
Marc: |
LEADER 03303naa a2200397 a 4500 001 2135418 005 2022-06-09 008 2021 bl uuuu u00u1 u #d 024 7 $a10.1039/d1qm00665g$2DOI 100 1 $aSOARES, J. C. 245 $aDetection of a SARS-CoV-2 sequence with genosensors using data analysis based on information visualization and machine learning techniques.$h[electronic resource] 260 $c2021 300 $a5658-5670 520 $aWe report on genosensors to detect an ssDNA sequence from the SARS-CoV-2 genome, which mimics the GU280 gp10 gene (coding the viral nucleocapsid phosphoprotein), using four distinct principles of detection and treating the data with information visualization and machine learning techniques. Genosensors were fabricated on either gold (Au) interdigitated electrodes for electrical and electrochemical measurements or on Au nanoparticles on a glass slide for optical measurements. They contained a matrix of 11-mercaptoundecanoic acid (11-MUA) self-assembled monolayer (SAM) onto which a layer of capture probe (cpDNA) sequence was immobilized. Detection was performed using electrical and electrochemical impedance spectroscopies and localized surface plasmon resonance (LSPR). The highest sensitivity was reached with impedance spectroscopy, including using a low-cost (US$ 100) homemade impedance analyzer. Complementary ssDNA sequences were detected with a detection limit of 0.5 aM (0.3 copy per mL). This performance may be attributed to the high sensitivity of the electrical impedance technique combined with an appropriate arrangement of the sequences on the electrodes and hybridization between the complementary sequences, as inferred from polarizationmodulated infrared reflection absorption spectroscopy (PM-IRRAS). The selectivity of the genosensor was confirmed by plotting the impedance spectroscopy data with a multidimensional projection technique (interactive document mapping, IDMAP), where a clear separation was observed among the samples of the complementary DNA sequence at various concentrations and from buffer samples containing a non-complementary sequence and other DNA biomarkers. The diagnosis of SARS-CoV-2 mimicking sequences was also achieved with machine learning techniques applied to scanning electron microscope images taken from genosensors exposed to distinct concentrations of the complementary ssDNA sequences. In summary, the genosensors proposed here are promising for detecting SARS-CoV2 genetic material (RNA) in biological fluids in point-of-care settings 653 $aGenetic material (RNA) 653 $aSsDNA 653 $aViral nucleocapsid phosphoprotein) 700 1 $aSOARES, A. C. 700 1 $aRODRIGUES, V. C. 700 1 $aOITICICA, P. R. A. 700 1 $aRAYMUNDO-PEREIRA, P. A. 700 1 $aBOTT-NETO, J. L. 700 1 $aBUSCAGLIA, L. A. 700 1 $aCASTRO, L. D. C. de 700 1 $aRIBAS, L. C. 700 1 $aSCABINI, L. 700 1 $aBRAZACA, L. C. 700 1 $aCORREA, D. S. 700 1 $aMATTOSO, L. H. C. 700 1 $aOLIVEIRA, M. C. F. de 700 1 $aCARVALHO, A. C. P. L. de 700 1 $aCARRILHO, E. 700 1 $aBRUNO, O. M. 700 1 $aMELENDEZ, M. E. 700 1 $aOLIVEIRA JR, O. N. 773 $tMaterials Chemistry Frontiers$gv. 5, 2021.
Download
Esconder MarcMostrar Marc Completo |
Registro original: |
Embrapa Instrumentação (CNPDIA) |
|
Biblioteca |
ID |
Origem |
Tipo/Formato |
Classificação |
Cutter |
Registro |
Volume |
Status |
Fechar
|
Nenhum registro encontrado para a expressão de busca informada. |
|
|