| |
|
|
|
Registro Completo |
|
Biblioteca(s): |
Embrapa Milho e Sorgo. |
|
Data corrente: |
30/11/2017 |
|
Data da última atualização: |
19/12/2017 |
|
Tipo da produção científica: |
Documentos |
|
Autoria: |
MANTOVANI, E. C.; ABREU JÚNIOR, A.; FREITAS, J. de; BUZINARO, I.; MAY, A.; PARRELLA, R. A. da C.; OLIVEIRA, A. C. de. |
|
Afiliação: |
EVANDRO CHARTUNI MANTOVANI, CNPMS; Antônio Abreu Júnior, Empresa Marchesan Implementos e Máquinas Agrícolas; João Luiz Martins de Freitas, Empresa Marchesan Implementos e Máquinas Agrícolas; Itamar Buzinaro, Empresa Marchesan Implementos e Máquinas Agrícolas; ANDRE MAY, CNPMA; RAFAEL AUGUSTO DA COSTA PARRELLA, CNPMS; ANTONIO CARLOS DE OLIVEIRA, CNPMS. |
|
Título: |
Adequação de uma semeadora para a semeadura/implantação de sorgo sacarino e biomassa em área de descanso da cana-de-açúcar. |
|
Ano de publicação: |
2017 |
|
Fonte/Imprenta: |
Sete Lagoas: Embrapa Milho e Sorgo, 2017. |
|
Páginas: |
32 p. |
|
Série: |
(Embrapa Milho e Sorgo. Documentos, 215). |
|
Idioma: |
Português |
|
Conteúdo: |
Neste trabalho, vislumbrou-se utilizar as áreas de descanso de cana-de-açúcar das usinas para plantar cultivares de sorgo biomassa e sacarino, com alta capacidade de produção de massa e grão, para produção de energia e de etanol. Entretanto, a implantação da cultura do sorgo sacarino ou biomassa era comprometida face à dificuldade de semear, nas áreas com alta densidade de palhada. Durante os semeios iniciais, o mecanismo de preparo do solo na linha e o de distribuição da semente não era eficiente e dificultava o estabelecimento do estande técnico inicial, recomendado para esta cultura. Em uma parceria com a Empresa Marchesan Implementos e Máquinas Agrícolas - Tatu S.A., de Matão-SP, foi possível utilizar uma semeadora-adubadora comercial, já desenvolvida para semente graúda, como milho, feijão e soja, nestas mesmas áreas. O resultado deste trabalho foi muito bom e, com a adequação da semeadora-adubadora, permitiu a implantação do estande técnico inicial recomendado de 120 mil plantas/ha, com as modificações e os ajustes realizados nas áreas da Usina Bom Retiro, da empresa Raízen, no município de Capivari-SP. |
|
Palavras-Chave: |
Semeio. |
|
Thesagro: |
Equipamento agrícola; Sorgo açucareiro. |
|
Categoria do assunto: |
X Pesquisa, Tecnologia e Engenharia |
|
URL: |
https://ainfo.cnptia.embrapa.br/digital/bitstream/item/169030/1/doc-215.pdf
|
|
Marc: |
LEADER 01925nam a2200241 a 4500
001 2081121
005 2017-12-19
008 2017 bl uuuu u0uu1 u #d
100 1 $aMANTOVANI, E. C.
245 $aAdequação de uma semeadora para a semeadura/implantação de sorgo sacarino e biomassa em área de descanso da cana-de-açúcar.$h[electronic resource]
260 $aSete Lagoas: Embrapa Milho e Sorgo$c2017
300 $a32 p.
490 $a(Embrapa Milho e Sorgo. Documentos, 215).
520 $aNeste trabalho, vislumbrou-se utilizar as áreas de descanso de cana-de-açúcar das usinas para plantar cultivares de sorgo biomassa e sacarino, com alta capacidade de produção de massa e grão, para produção de energia e de etanol. Entretanto, a implantação da cultura do sorgo sacarino ou biomassa era comprometida face à dificuldade de semear, nas áreas com alta densidade de palhada. Durante os semeios iniciais, o mecanismo de preparo do solo na linha e o de distribuição da semente não era eficiente e dificultava o estabelecimento do estande técnico inicial, recomendado para esta cultura. Em uma parceria com a Empresa Marchesan Implementos e Máquinas Agrícolas - Tatu S.A., de Matão-SP, foi possível utilizar uma semeadora-adubadora comercial, já desenvolvida para semente graúda, como milho, feijão e soja, nestas mesmas áreas. O resultado deste trabalho foi muito bom e, com a adequação da semeadora-adubadora, permitiu a implantação do estande técnico inicial recomendado de 120 mil plantas/ha, com as modificações e os ajustes realizados nas áreas da Usina Bom Retiro, da empresa Raízen, no município de Capivari-SP.
650 $aEquipamento agrícola
650 $aSorgo açucareiro
653 $aSemeio
700 1 $aABREU JÚNIOR, A.
700 1 $aFREITAS, J. de
700 1 $aBUZINARO, I.
700 1 $aMAY, A.
700 1 $aPARRELLA, R. A. da C.
700 1 $aOLIVEIRA, A. C. de
Download
Esconder MarcMostrar Marc Completo |
|
Registro original: |
Embrapa Milho e Sorgo (CNPMS) |
|
|
Biblioteca |
ID |
Origem |
Tipo/Formato |
Classificação |
Cutter |
Registro |
Volume |
Status |
URL |
Voltar
|
|
|
 | Acesso ao texto completo restrito à biblioteca da Embrapa Agroindústria de Alimentos. Para informações adicionais entre em contato com ctaa.biblioteca@embrapa.br. |
Registro Completo
|
Biblioteca(s): |
Embrapa Agroindústria de Alimentos. |
|
Data corrente: |
18/05/2023 |
|
Data da última atualização: |
14/12/2023 |
|
Tipo da produção científica: |
Resumo em Anais de Congresso |
|
Autoria: |
RODRIGUES, J. P.; COELHO, C. C. DE S.; HIDALGO CHÁVEZ, D. W.; AMANCIO, D.; SOARES, A. G.; FREITAS-SILVA, O. |
|
Afiliação: |
JULIANA PEREIRA RODRIGUES, UNIRIO; CAROLINE CORRÊA DE SOUZA COELHO, UNIRIO; DAVY WILLIAM HIDALGO CHÁVEZ, UFRRJ; DAIANA AMANCIO, UNIRIO; ANTONIO GOMES SOARES, CTAA; OTNIEL FREITAS SILVA, CTAA. |
|
Título: |
Development and characterization of biocomposite films based on alginate and chitosan for use as postharvest fruit packaging. |
|
Ano de publicação: |
2023 |
|
Fonte/Imprenta: |
In: CONFERÊNCIA INTERNACIONAL DE PROTEÍNAS E COLOIDES ALIMENTARES, 9., 2023, Rio de Janeiro. Anais... Campinas, Galoá, 2023. |
|
Idioma: |
Inglês |
|
Notas: |
Poster 157716.Eixo temático: Colóides para filmes comestíveis. CIPCA. |
|
Conteúdo: |
Postharvest diseases caused by fungi are reported as one of the main causes of food loss, mainly in the fruit and vegetable (FV) sector. Antimicrobials, such as zinc oxide nanoparticles (ZnOnano) and sodium benzoate (SB), have shown good results as postharvest technology for the FV sector, increasing the food shelf life and reducing losses. This work aimed to develop and characterize films made from sodium alginate and chitosan composites, incorporated with ZnOnano or SB to be used as postharvest fruit packaging. To develop the composite film-forming solutions of alginate (2% m/v) and chitosan (1% m/v) were prepared and mixed in a 9:1 ratio (alginate/chitosan). The alginate crosslinking process was carried out before mixing by crosslinking the polymer with calcium chloride at two different concentrations (0.375% or 0.5%). ZnOnano < 50 nm (0.5 mg/mL) or SB (30 mg/L) were added to the filmogenic solution, plated into Petri dishes, and dried in air circulation oven at 40°C/16 h. The different films obtained were analyzed for their visual appearance, color, opacity, thickness, mechanical properties, humidity, and solubility in water. The statistical analysis was performed by two-way ANOVA, Tukey, and Scott-Knott with 5% of significance. The studied polymeric composition provided plastic and flexible films, with a homogeneous visual appearance regardless of the crosslinking agent concentration or the addition of different antimicrobials. The films added with ZnOnano presented more cohesive appearance than the other films and all of them presented a yellowish color tone, provided by the higher alginate proportion used in the formulation, where the parameter b*, which measures the variation between shades of blue and yellow, showed positive values between 9.31 ± 0.789 and 11.5 ± 3.37. The films showed high transparency, confirmed by the values of low opacity600 nm, lying between 0.99 ± 0,08 and 2.35 ± 1,03. The crosslinking process and the addition of ZnOnano could change the film's physical properties, leaving them with less thickness, higher rupture tension, lower elongation at break, and higher Young's modulus, when compared to non-crosslinked films and without the addition of antimicrobials. The average moisture content of films with lower crosslinking (18.7 ± 1.241%) was higher when compared to the average of films with higher crosslinking (17.11 ± 0.586%). The films incorporated by different antimicrobial agents also showed significant moisture averages when compared to films without them. The addition of antimicrobial agents probably increased the hygroscopicity of the films, and the cross-linking agent concentration did not influence this variable. All films were highly soluble in water (54.9 ± 3.55 - 80.9 ± 11.4%) after 24h indicating that the crosslinking process and the change in the film's structure with ZnOnano, were not enough to make them less soluble. Despite the structural change that occurred in the films with crosslinking and the addition of ZnOnano, new experiments need to be performed, increasing the concentration of the crosslinking agent to reduce the solubility of the films and enable their use as food packaging. MenosPostharvest diseases caused by fungi are reported as one of the main causes of food loss, mainly in the fruit and vegetable (FV) sector. Antimicrobials, such as zinc oxide nanoparticles (ZnOnano) and sodium benzoate (SB), have shown good results as postharvest technology for the FV sector, increasing the food shelf life and reducing losses. This work aimed to develop and characterize films made from sodium alginate and chitosan composites, incorporated with ZnOnano or SB to be used as postharvest fruit packaging. To develop the composite film-forming solutions of alginate (2% m/v) and chitosan (1% m/v) were prepared and mixed in a 9:1 ratio (alginate/chitosan). The alginate crosslinking process was carried out before mixing by crosslinking the polymer with calcium chloride at two different concentrations (0.375% or 0.5%). ZnOnano < 50 nm (0.5 mg/mL) or SB (30 mg/L) were added to the filmogenic solution, plated into Petri dishes, and dried in air circulation oven at 40°C/16 h. The different films obtained were analyzed for their visual appearance, color, opacity, thickness, mechanical properties, humidity, and solubility in water. The statistical analysis was performed by two-way ANOVA, Tukey, and Scott-Knott with 5% of significance. The studied polymeric composition provided plastic and flexible films, with a homogeneous visual appearance regardless of the crosslinking agent concentration or the addition of different antimicrobials. The films added with ZnOnano presented mor... Mostrar Tudo |
|
Palavras-Chave: |
Biocomposite; Postharvest. |
|
Thesaurus NAL: |
Nanoparticles. |
|
Categoria do assunto: |
-- |
|
Marc: |
LEADER 04021nam a2200217 a 4500
001 2153819
005 2023-12-14
008 2023 bl uuuu u00u1 u #d
100 1 $aRODRIGUES, J. P.
245 $aDevelopment and characterization of biocomposite films based on alginate and chitosan for use as postharvest fruit packaging.$h[electronic resource]
260 $aIn: CONFERÊNCIA INTERNACIONAL DE PROTEÍNAS E COLOIDES ALIMENTARES, 9., 2023, Rio de Janeiro. Anais... Campinas, Galoá$c2023
500 $aPoster 157716.Eixo temático: Colóides para filmes comestíveis. CIPCA.
520 $aPostharvest diseases caused by fungi are reported as one of the main causes of food loss, mainly in the fruit and vegetable (FV) sector. Antimicrobials, such as zinc oxide nanoparticles (ZnOnano) and sodium benzoate (SB), have shown good results as postharvest technology for the FV sector, increasing the food shelf life and reducing losses. This work aimed to develop and characterize films made from sodium alginate and chitosan composites, incorporated with ZnOnano or SB to be used as postharvest fruit packaging. To develop the composite film-forming solutions of alginate (2% m/v) and chitosan (1% m/v) were prepared and mixed in a 9:1 ratio (alginate/chitosan). The alginate crosslinking process was carried out before mixing by crosslinking the polymer with calcium chloride at two different concentrations (0.375% or 0.5%). ZnOnano < 50 nm (0.5 mg/mL) or SB (30 mg/L) were added to the filmogenic solution, plated into Petri dishes, and dried in air circulation oven at 40°C/16 h. The different films obtained were analyzed for their visual appearance, color, opacity, thickness, mechanical properties, humidity, and solubility in water. The statistical analysis was performed by two-way ANOVA, Tukey, and Scott-Knott with 5% of significance. The studied polymeric composition provided plastic and flexible films, with a homogeneous visual appearance regardless of the crosslinking agent concentration or the addition of different antimicrobials. The films added with ZnOnano presented more cohesive appearance than the other films and all of them presented a yellowish color tone, provided by the higher alginate proportion used in the formulation, where the parameter b*, which measures the variation between shades of blue and yellow, showed positive values between 9.31 ± 0.789 and 11.5 ± 3.37. The films showed high transparency, confirmed by the values of low opacity600 nm, lying between 0.99 ± 0,08 and 2.35 ± 1,03. The crosslinking process and the addition of ZnOnano could change the film's physical properties, leaving them with less thickness, higher rupture tension, lower elongation at break, and higher Young's modulus, when compared to non-crosslinked films and without the addition of antimicrobials. The average moisture content of films with lower crosslinking (18.7 ± 1.241%) was higher when compared to the average of films with higher crosslinking (17.11 ± 0.586%). The films incorporated by different antimicrobial agents also showed significant moisture averages when compared to films without them. The addition of antimicrobial agents probably increased the hygroscopicity of the films, and the cross-linking agent concentration did not influence this variable. All films were highly soluble in water (54.9 ± 3.55 - 80.9 ± 11.4%) after 24h indicating that the crosslinking process and the change in the film's structure with ZnOnano, were not enough to make them less soluble. Despite the structural change that occurred in the films with crosslinking and the addition of ZnOnano, new experiments need to be performed, increasing the concentration of the crosslinking agent to reduce the solubility of the films and enable their use as food packaging.
650 $aNanoparticles
653 $aBiocomposite
653 $aPostharvest
700 1 $aCOELHO, C. C. DE S.
700 1 $aHIDALGO CHÁVEZ, D. W.
700 1 $aAMANCIO, D.
700 1 $aSOARES, A. G.
700 1 $aFREITAS-SILVA, O.
Download
Esconder MarcMostrar Marc Completo |
|
Registro original: |
Embrapa Agroindústria de Alimentos (CTAA) |
|
|
Biblioteca |
ID |
Origem |
Tipo/Formato |
Classificação |
Cutter |
Registro |
Volume |
Status |
Fechar
|
| Expressão de busca inválida. Verifique!!! |
|
|
