|
|
| Acesso ao texto completo restrito à biblioteca da Embrapa Agroenergia. Para informações adicionais entre em contato com cnpae.biblioteca@embrapa.br. |
Registro Completo |
Biblioteca(s): |
Embrapa Agroenergia. |
Data corrente: |
16/11/2023 |
Data da última atualização: |
16/11/2023 |
Tipo da produção científica: |
Artigo em Periódico Indexado |
Autoria: |
CARVALHO, L.; CORREA, I.; ALMEIDA, E. S.; SILVA, A. M. A.; VALADARES, L. F.; LUNA, F. M. T.; SILVA JUNIOR, I. J.; MONTEIRO, S. |
Afiliação: |
LAIANE CARVALHO, UNIVERSIDADE FEDERAL DE GOIAS; ISABELLA CORREA, UNIVERSIDADE DE BRASILIA; ERISLENE S. ALMEIDA, CNPAE; ALYSSON M. A. SILVA, UNIVERSIDADE DE BRASILIA; LEONARDO FONSECA VALADARES, CNPAE; F. MURILO T. LUNA, UNIVERSIDADE FEDERAL DO CEARÁ; IVANILDO J. SILVA JUNIOR, UNIVERSIDADE FEDERAL DO CEARÁ; SIMONE MONTEIRO, UNIVERSIDADE DE BRASILIA. |
Título: |
Recovering carotenes from crude palm oil onto macroporous polymeric resin: dynamic adsorption experiments and mechanistic insights. |
Ano de publicação: |
2023 |
Fonte/Imprenta: |
Adsorption, October 2023. |
DOI: |
https://doi.org/10.1007/s10450-023-00419-6 |
Idioma: |
Inglês |
Notas: |
Special Issue: EBA14 - 14th Brazilian Meeting on Adsorption. On-line first. |
Conteúdo: |
Abstract: This study aims to recover carotenes from crude palm oil, which are typically destroyed during refning, despite their high nutritional value and vitamin activity. The proposed approach involves the continuous adsorption of carotenes from crude palm oil onto polymeric resins, specifcally Diaion HP-20. To evaluate the adsorption process, breakthrough experiments were conducted using solutions consisting of 10% oil and 90% isopropanol (w/w) at a temperature of 313 K. The experimental data obtained from the breakthrough experiments were successfully predicted by a Linear Driving Force (LDF) model, indicating its adequacy in describing the adsorption process. The shape of the breakthrough curve was found to be signifcantly infuenced by the variation in axial dispersion (Dax). The estimated mass transfer coefcient (KL) varied from 2.25 for the fresh resin to 1.31 min−1 for the two-times regenerated, and the difusion in the adsorbate (DH) was 0.0202 mm2 /min; the average capacity of the solid phase was 0.78, 0.76 and 0.72 mg/g for fresh, one-time and two-time regenerated resins, respectively. FTIR analysis provided evidence of the formation of ester bonds between the polymeric resin and the oil, confrming the occurrence of chemical interactions during the adsorption process. MicroCT analysis indicates the presence of intraparticle difusion phenomena within the resin. A notable outcome of this study was the potential for reusing the polymeric resin for multiple cycles without a signifcant loss in its adsorptive capacity. This suggests the feasibility and promising nature of removing carotenes from crude palm oil through the proposed approach. MenosAbstract: This study aims to recover carotenes from crude palm oil, which are typically destroyed during refning, despite their high nutritional value and vitamin activity. The proposed approach involves the continuous adsorption of carotenes from crude palm oil onto polymeric resins, specifcally Diaion HP-20. To evaluate the adsorption process, breakthrough experiments were conducted using solutions consisting of 10% oil and 90% isopropanol (w/w) at a temperature of 313 K. The experimental data obtained from the breakthrough experiments were successfully predicted by a Linear Driving Force (LDF) model, indicating its adequacy in describing the adsorption process. The shape of the breakthrough curve was found to be signifcantly infuenced by the variation in axial dispersion (Dax). The estimated mass transfer coefcient (KL) varied from 2.25 for the fresh resin to 1.31 min−1 for the two-times regenerated, and the difusion in the adsorbate (DH) was 0.0202 mm2 /min; the average capacity of the solid phase was 0.78, 0.76 and 0.72 mg/g for fresh, one-time and two-time regenerated resins, respectively. FTIR analysis provided evidence of the formation of ester bonds between the polymeric resin and the oil, confrming the occurrence of chemical interactions during the adsorption process. MicroCT analysis indicates the presence of intraparticle difusion phenomena within the resin. A notable outcome of this study was the potential for reusing the polymeric resin for multiple cycle... Mostrar Tudo |
Palavras-Chave: |
Força motriz linear; Microtomografia; Oleo comestível; Transferência de massa. |
Thesagro: |
Regeneração; Vitamina. |
Categoria do assunto: |
Q Alimentos e Nutrição Humana |
Marc: |
LEADER 02652naa a2200301 a 4500 001 2158481 005 2023-11-16 008 2023 bl uuuu u00u1 u #d 024 7 $ahttps://doi.org/10.1007/s10450-023-00419-6$2DOI 100 1 $aCARVALHO, L. 245 $aRecovering carotenes from crude palm oil onto macroporous polymeric resin$bdynamic adsorption experiments and mechanistic insights.$h[electronic resource] 260 $c2023 500 $aSpecial Issue: EBA14 - 14th Brazilian Meeting on Adsorption. On-line first. 520 $aAbstract: This study aims to recover carotenes from crude palm oil, which are typically destroyed during refning, despite their high nutritional value and vitamin activity. The proposed approach involves the continuous adsorption of carotenes from crude palm oil onto polymeric resins, specifcally Diaion HP-20. To evaluate the adsorption process, breakthrough experiments were conducted using solutions consisting of 10% oil and 90% isopropanol (w/w) at a temperature of 313 K. The experimental data obtained from the breakthrough experiments were successfully predicted by a Linear Driving Force (LDF) model, indicating its adequacy in describing the adsorption process. The shape of the breakthrough curve was found to be signifcantly infuenced by the variation in axial dispersion (Dax). The estimated mass transfer coefcient (KL) varied from 2.25 for the fresh resin to 1.31 min−1 for the two-times regenerated, and the difusion in the adsorbate (DH) was 0.0202 mm2 /min; the average capacity of the solid phase was 0.78, 0.76 and 0.72 mg/g for fresh, one-time and two-time regenerated resins, respectively. FTIR analysis provided evidence of the formation of ester bonds between the polymeric resin and the oil, confrming the occurrence of chemical interactions during the adsorption process. MicroCT analysis indicates the presence of intraparticle difusion phenomena within the resin. A notable outcome of this study was the potential for reusing the polymeric resin for multiple cycles without a signifcant loss in its adsorptive capacity. This suggests the feasibility and promising nature of removing carotenes from crude palm oil through the proposed approach. 650 $aRegeneração 650 $aVitamina 653 $aForça motriz linear 653 $aMicrotomografia 653 $aOleo comestível 653 $aTransferência de massa 700 1 $aCORREA, I. 700 1 $aALMEIDA, E. S. 700 1 $aSILVA, A. M. A. 700 1 $aVALADARES, L. F. 700 1 $aLUNA, F. M. T. 700 1 $aSILVA JUNIOR, I. J. 700 1 $aMONTEIRO, S. 773 $tAdsorption, October 2023.
Download
Esconder MarcMostrar Marc Completo |
Registro original: |
Embrapa Agroenergia (CNPAE) |
|
Biblioteca |
ID |
Origem |
Tipo/Formato |
Classificação |
Cutter |
Registro |
Volume |
Status |
URL |
Voltar
|
|
Registro Completo
Biblioteca(s): |
Embrapa Florestas. |
Data corrente: |
21/01/2019 |
Data da última atualização: |
21/01/2019 |
Tipo da produção científica: |
Artigo em Periódico Indexado |
Circulação/Nível: |
A - 2 |
Autoria: |
RIBES, D. D.; ZANATTA, P.; GATTO, D. A.; MAGALHAES, W. L. E.; BELTRAME, R. |
Afiliação: |
Débora Duarte Ribes, EIM/PPGCEM/UFPel; Paula Zanatta, EIM/PPGCEM/UFPel; Darci Alberto Gatto, EIM/PPGCEM/UFPel; WASHINGTON LUIZ ESTEVES MAGALHAES, CNPF; Rafael Beltrame, EIM/PPGCEM/UFPel. |
Título: |
Produção de suspensões nanofibrilares de celulose vegetal por meio de processo combinado: avaliação do gasto energético. |
Ano de publicação: |
2018 |
Fonte/Imprenta: |
Matéria, Rio de Janeiro, v. 23, n. 4, e-12269, 2018. 9 p. |
DOI: |
1590/S1517-707620180004.0603 |
Idioma: |
Português |
Conteúdo: |
O presente estudo tem por objetivo produzir nanofibrilas de celulose vegetal com polpa Kraft marrom e branqueada por meio de um pré-tratamento enzimático e posteriormente um mecânico, denominado assim como processo combinado, com o intuito de diminuição de gasto energético. Para isso, as amostras de polpas de celulose foram previamente desestruturadas e encharcadas em água destilada com concentração de 3% de sólidos, afim de homogeneizá-las. Na hidrólise enzimática utilizou-se a enzima comercial Cellic CTec2, em porcentagens que variaram de 0,01 a 0,1% por diferentes períodos (1 e 2 horas). Após o tempo de hidrólise, a polpa foi passada em um moinho de discos, onde nesse processo ocorreu a medida do consumo do gasto energético com auxílio de um medidor de energia. Para a produção do gel, as polpas foram processadas pelo moinho de disco em ciclos de passagens. Para a inibição enzimática o conteúdo foi aquecido à 85°C. Os géis foram armazenados em resfriamento de 5°C. O processo foi caracterizado pelo gasto energético medido a cada amostra, além de ser medido o rendimento de cada gel produzido. De acordo com os resultados o processo combinado, apresentou-se viável para a produção de nanofibrilas de celulose vegetal, pois este diminui o gasto energético comparado com o processo mecânico e com a menor carga enzimática (0,01%). A polpa marrom mesmo sem ter passado por processos de deslignificação mostrou-se promissora na produção das nanofibrilas de celulose vegetal. |
Palavras-Chave: |
Celulose nanofibrils; Combined process; Energetic waste; Enzima Cellic CTec2; Gasto energético; Nanofribila de celulose; Polpa kraft; Processo combinado. |
Thesaurus NAL: |
Kraft pulp. |
Categoria do assunto: |
X Pesquisa, Tecnologia e Engenharia |
URL: |
https://ainfo.cnptia.embrapa.br/digital/bitstream/item/191016/1/2018-Washington-RM-Producao.pdf
|
Marc: |
LEADER 02430naa a2200289 a 4500 001 2104570 005 2019-01-21 008 2018 bl uuuu u00u1 u #d 024 7 $a1590/S1517-707620180004.0603$2DOI 100 1 $aRIBES, D. D. 245 $aProdução de suspensões nanofibrilares de celulose vegetal por meio de processo combinado$bavaliação do gasto energético.$h[electronic resource] 260 $c2018 520 $aO presente estudo tem por objetivo produzir nanofibrilas de celulose vegetal com polpa Kraft marrom e branqueada por meio de um pré-tratamento enzimático e posteriormente um mecânico, denominado assim como processo combinado, com o intuito de diminuição de gasto energético. Para isso, as amostras de polpas de celulose foram previamente desestruturadas e encharcadas em água destilada com concentração de 3% de sólidos, afim de homogeneizá-las. Na hidrólise enzimática utilizou-se a enzima comercial Cellic CTec2, em porcentagens que variaram de 0,01 a 0,1% por diferentes períodos (1 e 2 horas). Após o tempo de hidrólise, a polpa foi passada em um moinho de discos, onde nesse processo ocorreu a medida do consumo do gasto energético com auxílio de um medidor de energia. Para a produção do gel, as polpas foram processadas pelo moinho de disco em ciclos de passagens. Para a inibição enzimática o conteúdo foi aquecido à 85°C. Os géis foram armazenados em resfriamento de 5°C. O processo foi caracterizado pelo gasto energético medido a cada amostra, além de ser medido o rendimento de cada gel produzido. De acordo com os resultados o processo combinado, apresentou-se viável para a produção de nanofibrilas de celulose vegetal, pois este diminui o gasto energético comparado com o processo mecânico e com a menor carga enzimática (0,01%). A polpa marrom mesmo sem ter passado por processos de deslignificação mostrou-se promissora na produção das nanofibrilas de celulose vegetal. 650 $aKraft pulp 653 $aCelulose nanofibrils 653 $aCombined process 653 $aEnergetic waste 653 $aEnzima Cellic CTec2 653 $aGasto energético 653 $aNanofribila de celulose 653 $aPolpa kraft 653 $aProcesso combinado 700 1 $aZANATTA, P. 700 1 $aGATTO, D. A. 700 1 $aMAGALHAES, W. L. E. 700 1 $aBELTRAME, R. 773 $tMatéria, Rio de Janeiro$gv. 23, n. 4, e-12269, 2018. 9 p.
Download
Esconder MarcMostrar Marc Completo |
Registro original: |
Embrapa Florestas (CNPF) |
|
Biblioteca |
ID |
Origem |
Tipo/Formato |
Classificação |
Cutter |
Registro |
Volume |
Status |
Fechar
|
Nenhum registro encontrado para a expressão de busca informada. |
|
|