|
|
Registro Completo |
Biblioteca(s): |
Embrapa Instrumentação. |
Data corrente: |
05/10/2023 |
Data da última atualização: |
15/01/2024 |
Tipo da produção científica: |
Orientação de Tese de Pós-Graduação |
Autoria: |
CRUZ, J. C. da. |
Título: |
PHOTOCATALYTIC CONTROLLED OXIDATION REACTION OF METHANE. |
Ano de publicação: |
2023 |
Fonte/Imprenta: |
2023. Tese ( Doutorado em Ciências, área de concentração: físico-química), Universidade Federal de São Carlos, Programa de Pós-Graduação em Química, São Carlos-SP. |
Páginas: |
98 p. |
Idioma: |
Inglês |
Notas: |
Orientador: Caue Ribeiro de Oliveira
Coorientadora: Elaine Cristina Paris |
Conteúdo: |
ABSTRACT PHOTOCATALYTIC CONTROLLED OXIDATION REACTION OF METHANE. The CH4 partial oxidation into value-added chemicals by solar means has been discussed as alternative for emission abatement, a fundamental topic for sustainable production with lower global warming gas emissions in future. So far, various semiconductor photocatalysts have been developed. However, the understanding of the main factors influencing photocatalysts' activities on controlled oxidation of methane to methanol is still an issue, especially due to methane overoxidation to CO2. Thus, we propose that the semiconductor must have a valence band (VB) favorable to produce hydroxyl radicals (?OH) and a conduction band (CB) not advantageous to superoxide radical (O2). Furthermore, the concentration of the hydroxyl radicals is fundamental and should be fine-tuned for selectively oxidize methane. O2 also is the key oxidant for process control, since O2 may scavenging methyl radicals (?CH3) that further react with ?OH to form methanol. Our results showed that the required band edge positions for photocatalysts (e.g., Bi2O3) seems correct to obtain significant amounts of desirable chemical products, taking as main products methanol (3700 μmol g-1 ) and acetic acid acetic acid (~2036 μmol g -1 h -1 ) from pure CH4 at room temperature and atmospheric pressure. Moreover, longer hydrocarbons (e.g., ethanol and acetone) could be produced depending on the reaction condition. ESR experiments proved the formation of ?CH3 and ?OH, and isotope labeling experiment with 13CH4 asthe reactant also was conducted, confirming that CH3OH comes from CH4 photooxidation.Another sustainable route to control the CH4 oxidation driven by chloride intermediates in solution using Bismuth-based semiconductors excited in visible light was investigated. BiOCl, a perovskite layered material, exhibited promising photocatalytic performance for methane conversion to methanol (1300 µmol g-1 ), acetic acid (435 µmol g-1 ), and ethanol (57 µmol g-1 ) without foreign radicals to control the reaction. Our findings are significant to new level of understanding in methane?s efficient partial photooxidation, which opens a way to control competitive reactions by appropriate band edge positions in photocatalysts to greater selectivity and avoid its overoxidation to CO2 MenosABSTRACT PHOTOCATALYTIC CONTROLLED OXIDATION REACTION OF METHANE. The CH4 partial oxidation into value-added chemicals by solar means has been discussed as alternative for emission abatement, a fundamental topic for sustainable production with lower global warming gas emissions in future. So far, various semiconductor photocatalysts have been developed. However, the understanding of the main factors influencing photocatalysts' activities on controlled oxidation of methane to methanol is still an issue, especially due to methane overoxidation to CO2. Thus, we propose that the semiconductor must have a valence band (VB) favorable to produce hydroxyl radicals (?OH) and a conduction band (CB) not advantageous to superoxide radical (O2). Furthermore, the concentration of the hydroxyl radicals is fundamental and should be fine-tuned for selectively oxidize methane. O2 also is the key oxidant for process control, since O2 may scavenging methyl radicals (?CH3) that further react with ?OH to form methanol. Our results showed that the required band edge positions for photocatalysts (e.g., Bi2O3) seems correct to obtain significant amounts of desirable chemical products, taking as main products methanol (3700 μmol g-1 ) and acetic acid acetic acid (~2036 μmol g -1 h -1 ) from pure CH4 at room temperature and atmospheric pressure. Moreover, longer hydrocarbons (e.g., ethanol and acetone) could be produced depending on the reaction condition. ESR experiments proved the formatio... Mostrar Tudo |
Palavras-Chave: |
Superoxidação em CO2. |
Categoria do assunto: |
-- |
URL: |
https://ainfo.cnptia.embrapa.br/digital/bitstream/doc/1157124/1/TS-PHOTOCATALYTIC-CONTROLLED-OXIDATION.pdf
|
Marc: |
LEADER 02955nam a2200145 a 4500 001 2157124 005 2024-01-15 008 2023 bl uuuu m 00u1 u #d 100 1 $aCRUZ, J. C. da 245 $aPHOTOCATALYTIC CONTROLLED OXIDATION REACTION OF METHANE.$h[electronic resource] 260 $a2023. Tese ( Doutorado em Ciências, área de concentração: físico-química), Universidade Federal de São Carlos, Programa de Pós-Graduação em Química, São Carlos-SP.$c2023 300 $a98 p. 500 $aOrientador: Caue Ribeiro de Oliveira Coorientadora: Elaine Cristina Paris 520 $aABSTRACT PHOTOCATALYTIC CONTROLLED OXIDATION REACTION OF METHANE. The CH4 partial oxidation into value-added chemicals by solar means has been discussed as alternative for emission abatement, a fundamental topic for sustainable production with lower global warming gas emissions in future. So far, various semiconductor photocatalysts have been developed. However, the understanding of the main factors influencing photocatalysts' activities on controlled oxidation of methane to methanol is still an issue, especially due to methane overoxidation to CO2. Thus, we propose that the semiconductor must have a valence band (VB) favorable to produce hydroxyl radicals (?OH) and a conduction band (CB) not advantageous to superoxide radical (O2). Furthermore, the concentration of the hydroxyl radicals is fundamental and should be fine-tuned for selectively oxidize methane. O2 also is the key oxidant for process control, since O2 may scavenging methyl radicals (?CH3) that further react with ?OH to form methanol. Our results showed that the required band edge positions for photocatalysts (e.g., Bi2O3) seems correct to obtain significant amounts of desirable chemical products, taking as main products methanol (3700 μmol g-1 ) and acetic acid acetic acid (~2036 μmol g -1 h -1 ) from pure CH4 at room temperature and atmospheric pressure. Moreover, longer hydrocarbons (e.g., ethanol and acetone) could be produced depending on the reaction condition. ESR experiments proved the formation of ?CH3 and ?OH, and isotope labeling experiment with 13CH4 asthe reactant also was conducted, confirming that CH3OH comes from CH4 photooxidation.Another sustainable route to control the CH4 oxidation driven by chloride intermediates in solution using Bismuth-based semiconductors excited in visible light was investigated. BiOCl, a perovskite layered material, exhibited promising photocatalytic performance for methane conversion to methanol (1300 µmol g-1 ), acetic acid (435 µmol g-1 ), and ethanol (57 µmol g-1 ) without foreign radicals to control the reaction. Our findings are significant to new level of understanding in methane?s efficient partial photooxidation, which opens a way to control competitive reactions by appropriate band edge positions in photocatalysts to greater selectivity and avoid its overoxidation to CO2 653 $aSuperoxidação em CO2
Download
Esconder MarcMostrar Marc Completo |
Registro original: |
Embrapa Instrumentação (CNPDIA) |
|
Biblioteca |
ID |
Origem |
Tipo/Formato |
Classificação |
Cutter |
Registro |
Volume |
Status |
URL |
Voltar
|
|
| Acesso ao texto completo restrito à biblioteca da Embrapa Soja. Para informações adicionais entre em contato com valeria.cardoso@embrapa.br. |
Registro Completo
Biblioteca(s): |
Embrapa Soja. |
Data corrente: |
05/10/2004 |
Data da última atualização: |
17/03/2008 |
Autoria: |
NUNES JÚNIOR, J.; GUERZONI, R. A.; SOUSA, R. P.; GODOI, C. R. C.; MONTEIRO, P. M. F. O.; SOBRINHO, J. B. N.; PIMENTA, C. B.; ASSUNÇÃO, M. S.; SEII, A. H.; SOUZA, P. I. M.; SILVA, S. A.; SILVA, L. H. C. P.; CAMPOS, H. D.; ROCHA, M. R. |
Título: |
Avaliação de diferentes fungicidas em aplicação curativa para o controle da ferrugem asiática da soja. |
Ano de publicação: |
2004 |
Fonte/Imprenta: |
In: REUNIÃO DE PESQUISA DE SOJA NA REGIÃO CENTRAL DO BRASIL, 26., 2004, Ribeirão Preto. Resumos... Londrina: Embrapa Soja: Fundação Meridional, 2004. |
Páginas: |
p. 146. |
Série: |
(Embrapa Soja. Documentos, 234). |
Idioma: |
Português |
Notas: |
Organizado por Odilon Ferreira Saraiva, Janete Lasso Ortiz, Regina Maria Villas Boas de Campos Leite. |
Conteúdo: |
Com o objetivo de avaliar diferentes fungicidas em aplicação curativa no controle da ferrugem asiática da soja, foi instalado um experimento na safra 2003/2004 em Senador Canedo-GO. Utilizou-se a cultivar BRSGO Santa Cruz em um delineamento em blocos casualizados, composto por 10 tratamentos e 4 repetições, a saber: T1 Testemunha, T2 Epoxiconazole + Piraclostrobin (0,5 L pc/ha), T3 Propiconazole + Tryfloxystrobin + óleo mineral (0,4 L pc/ha + 0,25 L óleo/ha), T4 Tebuconazole (0,5 L pc/ha), T5 Tebuconazole + Trifloxystrobin (0,4 L pc/ha), T6 Tebuconazole + Trifloxystrobin (0,5 L pc/ha), T7 Ciproconazole + Trifloxystrobin (0,3 L pc/ha), T8 Ciproconazole + Trifloxystrobin + óleo mineral (0,3 L pc/ha + 0,25 L óleo/ha), T9 Propiconazole + Trifloxystrobin + óleo mineral (0,4 L pc/ha + 0,25 L óleo/ha) seguida de Tebuconazole (0,5 L pc/ha), T10 Ciproconazole + Trifloxystrobin (0,3 L pc/ha) seguida de Tebuconazole (0,5 L pc/ha). As aplicações dos produtos foram realizadas curativamente (10% de severidade - R3) por meio de pulverizador de CO2, utilizando-se a vazão equivalente a 200 L/ha, seguida por outra aplicação 10 dias após a primeira. Após a análise dos dados, verificou-se que houve diferença estatística quanto à produtividade entre os tratamentos, quando se compararam as médias pelo teste de Tukey a 5% de probabilidade. As melhores produtividades foram obtidas pelos tratamentos T2, T7, T4 e T5, respectivamente. A diferença na produtividade entre o melhor tratamento (T2) e a testemunha (T1) foi equivalente a 1.023 Kg/ha. MenosCom o objetivo de avaliar diferentes fungicidas em aplicação curativa no controle da ferrugem asiática da soja, foi instalado um experimento na safra 2003/2004 em Senador Canedo-GO. Utilizou-se a cultivar BRSGO Santa Cruz em um delineamento em blocos casualizados, composto por 10 tratamentos e 4 repetições, a saber: T1 Testemunha, T2 Epoxiconazole + Piraclostrobin (0,5 L pc/ha), T3 Propiconazole + Tryfloxystrobin + óleo mineral (0,4 L pc/ha + 0,25 L óleo/ha), T4 Tebuconazole (0,5 L pc/ha), T5 Tebuconazole + Trifloxystrobin (0,4 L pc/ha), T6 Tebuconazole + Trifloxystrobin (0,5 L pc/ha), T7 Ciproconazole + Trifloxystrobin (0,3 L pc/ha), T8 Ciproconazole + Trifloxystrobin + óleo mineral (0,3 L pc/ha + 0,25 L óleo/ha), T9 Propiconazole + Trifloxystrobin + óleo mineral (0,4 L pc/ha + 0,25 L óleo/ha) seguida de Tebuconazole (0,5 L pc/ha), T10 Ciproconazole + Trifloxystrobin (0,3 L pc/ha) seguida de Tebuconazole (0,5 L pc/ha). As aplicações dos produtos foram realizadas curativamente (10% de severidade - R3) por meio de pulverizador de CO2, utilizando-se a vazão equivalente a 200 L/ha, seguida por outra aplicação 10 dias após a primeira. Após a análise dos dados, verificou-se que houve diferença estatística quanto à produtividade entre os tratamentos, quando se compararam as médias pelo teste de Tukey a 5% de probabilidade. As melhores produtividades foram obtidas pelos tratamentos T2, T7, T4 e T5, respectivamente. A diferença na produtividade entre o melhor tratamento (T2) e a tes... Mostrar Tudo |
Categoria do assunto: |
-- |
Marc: |
LEADER 02660naa a2200313 a 4500 001 1467413 005 2008-03-17 008 2004 bl uuuu u00u1 u #d 100 1 $aNUNES JÚNIOR, J. 245 $aAvaliação de diferentes fungicidas em aplicação curativa para o controle da ferrugem asiática da soja. 260 $c2004 300 $ap. 146. 490 $a(Embrapa Soja. Documentos, 234). 500 $aOrganizado por Odilon Ferreira Saraiva, Janete Lasso Ortiz, Regina Maria Villas Boas de Campos Leite. 520 $aCom o objetivo de avaliar diferentes fungicidas em aplicação curativa no controle da ferrugem asiática da soja, foi instalado um experimento na safra 2003/2004 em Senador Canedo-GO. Utilizou-se a cultivar BRSGO Santa Cruz em um delineamento em blocos casualizados, composto por 10 tratamentos e 4 repetições, a saber: T1 Testemunha, T2 Epoxiconazole + Piraclostrobin (0,5 L pc/ha), T3 Propiconazole + Tryfloxystrobin + óleo mineral (0,4 L pc/ha + 0,25 L óleo/ha), T4 Tebuconazole (0,5 L pc/ha), T5 Tebuconazole + Trifloxystrobin (0,4 L pc/ha), T6 Tebuconazole + Trifloxystrobin (0,5 L pc/ha), T7 Ciproconazole + Trifloxystrobin (0,3 L pc/ha), T8 Ciproconazole + Trifloxystrobin + óleo mineral (0,3 L pc/ha + 0,25 L óleo/ha), T9 Propiconazole + Trifloxystrobin + óleo mineral (0,4 L pc/ha + 0,25 L óleo/ha) seguida de Tebuconazole (0,5 L pc/ha), T10 Ciproconazole + Trifloxystrobin (0,3 L pc/ha) seguida de Tebuconazole (0,5 L pc/ha). As aplicações dos produtos foram realizadas curativamente (10% de severidade - R3) por meio de pulverizador de CO2, utilizando-se a vazão equivalente a 200 L/ha, seguida por outra aplicação 10 dias após a primeira. Após a análise dos dados, verificou-se que houve diferença estatística quanto à produtividade entre os tratamentos, quando se compararam as médias pelo teste de Tukey a 5% de probabilidade. As melhores produtividades foram obtidas pelos tratamentos T2, T7, T4 e T5, respectivamente. A diferença na produtividade entre o melhor tratamento (T2) e a testemunha (T1) foi equivalente a 1.023 Kg/ha. 700 1 $aGUERZONI, R. A. 700 1 $aSOUSA, R. P. 700 1 $aGODOI, C. R. C. 700 1 $aMONTEIRO, P. M. F. O. 700 1 $aSOBRINHO, J. B. N. 700 1 $aPIMENTA, C. B. 700 1 $aASSUNÇÃO, M. S. 700 1 $aSEII, A. H. 700 1 $aSOUZA, P. I. M. 700 1 $aSILVA, S. A. 700 1 $aSILVA, L. H. C. P. 700 1 $aCAMPOS, H. D. 700 1 $aROCHA, M. R. 773 $tIn: REUNIÃO DE PESQUISA DE SOJA NA REGIÃO CENTRAL DO BRASIL, 26., 2004, Ribeirão Preto. Resumos... Londrina: Embrapa Soja: Fundação Meridional, 2004.
Download
Esconder MarcMostrar Marc Completo |
Registro original: |
Embrapa Soja (CNPSO) |
|
Biblioteca |
ID |
Origem |
Tipo/Formato |
Classificação |
Cutter |
Registro |
Volume |
Status |
Fechar
|
Nenhum registro encontrado para a expressão de busca informada. |
|
|