|
|
Registro Completo |
Biblioteca(s): |
Embrapa Meio Ambiente. |
Data corrente: |
19/11/2019 |
Data da última atualização: |
19/11/2019 |
Tipo da produção científica: |
Artigo em Periódico Indexado |
Autoria: |
FONGARO, C. T.; DEMATTÊ, J. A. M.; RIZZO, R.; SAFANELLI, J. L.; MENDES, W. de S.; DOTTO, A. C.; VICENTE, L. E.; FRANCESCHINI, M. H. D.; USTIN, S. L. |
Afiliação: |
CAIO TROULA FONGARO, ESALQ-USP; JOSE ALEXANDRE MELO DEMATTE, ESALQ-USP; RODNEI RIZZO, CENA-USP; JOSE LUCAS SAFANELLI, ESALQ-USP; WANDERSON DE SOUSA MENDES, ESALQ-USP; ANDRE CARNIELETTO DOTTO, ESALQ-USP; LUIZ EDUARDO VICENTE, CNPMA; MARSTON HERACLES DOMINGUES FRANCESCHINI, Wageningen University; SUSAN L USTIN, University of California-Davis. |
Título: |
Improvement of clay and sand quantification based on a novel approach with a focus on multispectral satellite images. |
Ano de publicação: |
2018 |
Fonte/Imprenta: |
Remote Sensing, v. 10, n. 10, p. 1-21, 2018. Article 1555. |
DOI: |
https://doi.org/10.3390/rs10101555 |
Idioma: |
Inglês |
Conteúdo: |
Abstract: Soil mapping demands large-scale surveys that are costly and time consuming. It is necessary to identify strategies with reduced costs to obtain detailed information for soil mapping. We aimed to compare multispectral satellite image and relief parameters for the quantification and mapping of clay and sand contents. The Temporal Synthetic Spectral (TESS) reflectance and Synthetic Soil Image (SYSI) approaches were used to identify and characterize texture spectral signatures at the image level. Soil samples were collected (0?20 cm depth, 919 points) from an area of 14,614 km 2 in Brazil for reference and model calibration. We compared different prediction approaches: (a) TESS and SYSI; (b) Relief-Derived Covariates (RDC); and (c) SYSI plus RDC. The TESS method produced highly similar behavior to the laboratory convolved data. The sandy textural class showed a greater increase in average spectral reflectance from Band 1 to 7 compared with the clayey class. The prediction using SYSI produced a better result for clay (R 2 = 0.83; RMSE = 65.0 g kg − 1 ) and sand (R 2 = 0.86; RMSE = 79.9 g kg − 1 ). Multispectral satellite images were more stable for the identification of soil properties than relief parameters. |
Palavras-Chave: |
Imagem de satélite; Mapeamento do solo. |
Thesagro: |
Satélite; Sensoriamento Remoto; Solo Arenoso; Solo Argiloso. |
Thesaurus Nal: |
Clay soils; Multispectral imagery; Precision agriculture; Reflectance spectroscopy; Remote sensing; Sandy soils; Satellites; Soil degradation; Soil map. |
Categoria do assunto: |
X Pesquisa, Tecnologia e Engenharia |
URL: |
https://ainfo.cnptia.embrapa.br/digital/bitstream/item/204955/1/Vicente-Clay-Sand-AP-2019.pdf
|
Marc: |
LEADER 02461naa a2200409 a 4500 001 2114592 005 2019-11-19 008 2018 bl uuuu u00u1 u #d 024 7 $ahttps://doi.org/10.3390/rs10101555$2DOI 100 1 $aFONGARO, C. T. 245 $aImprovement of clay and sand quantification based on a novel approach with a focus on multispectral satellite images.$h[electronic resource] 260 $c2018 520 $aAbstract: Soil mapping demands large-scale surveys that are costly and time consuming. It is necessary to identify strategies with reduced costs to obtain detailed information for soil mapping. We aimed to compare multispectral satellite image and relief parameters for the quantification and mapping of clay and sand contents. The Temporal Synthetic Spectral (TESS) reflectance and Synthetic Soil Image (SYSI) approaches were used to identify and characterize texture spectral signatures at the image level. Soil samples were collected (0?20 cm depth, 919 points) from an area of 14,614 km 2 in Brazil for reference and model calibration. We compared different prediction approaches: (a) TESS and SYSI; (b) Relief-Derived Covariates (RDC); and (c) SYSI plus RDC. The TESS method produced highly similar behavior to the laboratory convolved data. The sandy textural class showed a greater increase in average spectral reflectance from Band 1 to 7 compared with the clayey class. The prediction using SYSI produced a better result for clay (R 2 = 0.83; RMSE = 65.0 g kg − 1 ) and sand (R 2 = 0.86; RMSE = 79.9 g kg − 1 ). Multispectral satellite images were more stable for the identification of soil properties than relief parameters. 650 $aClay soils 650 $aMultispectral imagery 650 $aPrecision agriculture 650 $aReflectance spectroscopy 650 $aRemote sensing 650 $aSandy soils 650 $aSatellites 650 $aSoil degradation 650 $aSoil map 650 $aSatélite 650 $aSensoriamento Remoto 650 $aSolo Arenoso 650 $aSolo Argiloso 653 $aImagem de satélite 653 $aMapeamento do solo 700 1 $aDEMATTÊ, J. A. M. 700 1 $aRIZZO, R. 700 1 $aSAFANELLI, J. L. 700 1 $aMENDES, W. de S. 700 1 $aDOTTO, A. C. 700 1 $aVICENTE, L. E. 700 1 $aFRANCESCHINI, M. H. D. 700 1 $aUSTIN, S. L. 773 $tRemote Sensing$gv. 10, n. 10, p. 1-21, 2018. Article 1555.
Download
Esconder MarcMostrar Marc Completo |
Registro original: |
Embrapa Meio Ambiente (CNPMA) |
|
Biblioteca |
ID |
Origem |
Tipo/Formato |
Classificação |
Cutter |
Registro |
Volume |
Status |
URL |
Voltar
|
|
Registro Completo
Biblioteca(s): |
Embrapa Hortaliças. |
Data corrente: |
08/08/2014 |
Data da última atualização: |
08/08/2014 |
Tipo da produção científica: |
Boletim de Pesquisa e Desenvolvimento |
Autoria: |
PINHEIRO, J. B.; BOITEUX, L. S.; PEREIRA, R. B.; ALMEIDA, M. R. A.; CARNEIRO, R. M. D. G. |
Afiliação: |
JADIR BORGES PINHEIRO, CNPH; LEONARDO SILVA BOITEUX, CNPH; RICARDO BORGES PEREIRA, CNPH; MARIA RITA A. ALMEIDA; REGINA M. D. GOMES CARNEIRO. |
Título: |
Identificação de espécies de meloidogyne em tomateiro no Brasil. |
Ano de publicação: |
2014 |
Fonte/Imprenta: |
Brasília, DF: Embrapa, 2014. |
Páginas: |
16 p. |
Série: |
(Embrapa Hortaliças. Boletim de Pesquisa e Desenvolvimento, 102). |
ISSN: |
1677-2229 |
Idioma: |
Português |
Conteúdo: |
Objetivou-se neste trabalho identificar as espécies de Meloidogyne que ocorrem nas principais áreas de produção de tomate do Brasil. |
Palavras-Chave: |
Solanum lycopersicon. |
Thesagro: |
Nematoide; Tomate; Variedade resistente. |
Thesaurus NAL: |
Meloidogyne. |
Categoria do assunto: |
F Plantas e Produtos de Origem Vegetal |
URL: |
https://ainfo.cnptia.embrapa.br/digital/bitstream/item/106255/1/12-44-BPD-102.pdf
|
Marc: |
LEADER 00875nam a2200253 a 4500 001 1992143 005 2014-08-08 008 2014 bl uuuu u0uu1 u #d 022 $a1677-2229 100 1 $aPINHEIRO, J. B. 245 $aIdentificação de espécies de meloidogyne em tomateiro no Brasil.$h[electronic resource] 260 $aBrasília, DF: Embrapa$c2014 300 $a16 p. 490 $a(Embrapa Hortaliças. Boletim de Pesquisa e Desenvolvimento, 102). 520 $aObjetivou-se neste trabalho identificar as espécies de Meloidogyne que ocorrem nas principais áreas de produção de tomate do Brasil. 650 $aMeloidogyne 650 $aNematoide 650 $aTomate 650 $aVariedade resistente 653 $aSolanum lycopersicon 700 1 $aBOITEUX, L. S. 700 1 $aPEREIRA, R. B. 700 1 $aALMEIDA, M. R. A. 700 1 $aCARNEIRO, R. M. D. G.
Download
Esconder MarcMostrar Marc Completo |
Registro original: |
Embrapa Hortaliças (CNPH) |
|
Biblioteca |
ID |
Origem |
Tipo/Formato |
Classificação |
Cutter |
Registro |
Volume |
Status |
Fechar
|
Nenhum registro encontrado para a expressão de busca informada. |
|
|