|
|
Registro Completo |
Biblioteca(s): |
Embrapa Milho e Sorgo. |
Data corrente: |
23/08/2022 |
Data da última atualização: |
24/08/2022 |
Tipo da produção científica: |
Artigo em Periódico Indexado |
Autoria: |
COSTA, T. C. e C. da; FRANÇA, L.; SANTOS, T.; RAMOS, L. B.; CAMPANHA, M. M. |
Afiliação: |
THOMAZ CORREA E CASTRO DA COSTA, CNPMS; LUIZ FRANÇA, SIG Soluções Ltda; TIAGO SANTOS, SIG Soluções Ltda; LUCAS BARBOSA RAMOS, Universidade Federal São João del-Rei; MONICA MATOSO CAMPANHA, CNPMS. |
Título: |
CalcMadeira: software for estimating lumber production. |
Ano de publicação: |
2022 |
Fonte/Imprenta: |
Global Journal of Science Frontier Research, v. 22, n. 2, p. 1-17, 2022. |
Idioma: |
Inglês |
Conteúdo: |
One information that is generally not used but is still essential to the economic evaluation and wood yield of the sawmill production chain is the quantification of lumber a priori. The few applications that provide a solution to this problem work with one log at a time and generally use optimization techniques instead of cut pattern models. The software developed for this work uses trigonometric rules, applying the circumscribed square (block), longitudinal (or tangential), log rotation, and radial cut patterns to help a producer sell a tree not in cubic meters but as a function of the pieces obtained from trees. Six tests were performed using trees and individual logs. The comparison between the calculated and milled or drawing pieces was presented for each model. The total errors obtained were approximately 2% for priority pieces. The best accuracy for the number and volume of the lumber pieces was 2.2% and -5.4%, respectively, obtained with a 30o angle of the slab (waste wood) and 0.60 to the proportion of the radius parameters in the model that rotates the log. The total calculated and observed piece width distributions were statistically equal in the radial model. This application requires observation of the milling operation while monitoring parameters in a heterogeneous sample of wooden logs to obtain the best results. |
Palavras-Chave: |
Padrão de corte; Tronco. |
Thesagro: |
Madeira; Serra. |
Categoria do assunto: |
K Ciência Florestal e Produtos de Origem Vegetal |
URL: |
https://ainfo.cnptia.embrapa.br/digital/bitstream/doc/1145671/1/CalcMadeira-software-for-estimating-lumber-production.pdf
|
Marc: |
LEADER 01947naa a2200217 a 4500 001 2145671 005 2022-08-24 008 2022 bl uuuu u00u1 u #d 100 1 $aCOSTA, T. C. e C. da 245 $aCalcMadeira$bsoftware for estimating lumber production.$h[electronic resource] 260 $c2022 520 $aOne information that is generally not used but is still essential to the economic evaluation and wood yield of the sawmill production chain is the quantification of lumber a priori. The few applications that provide a solution to this problem work with one log at a time and generally use optimization techniques instead of cut pattern models. The software developed for this work uses trigonometric rules, applying the circumscribed square (block), longitudinal (or tangential), log rotation, and radial cut patterns to help a producer sell a tree not in cubic meters but as a function of the pieces obtained from trees. Six tests were performed using trees and individual logs. The comparison between the calculated and milled or drawing pieces was presented for each model. The total errors obtained were approximately 2% for priority pieces. The best accuracy for the number and volume of the lumber pieces was 2.2% and -5.4%, respectively, obtained with a 30o angle of the slab (waste wood) and 0.60 to the proportion of the radius parameters in the model that rotates the log. The total calculated and observed piece width distributions were statistically equal in the radial model. This application requires observation of the milling operation while monitoring parameters in a heterogeneous sample of wooden logs to obtain the best results. 650 $aMadeira 650 $aSerra 653 $aPadrão de corte 653 $aTronco 700 1 $aFRANÇA, L. 700 1 $aSANTOS, T. 700 1 $aRAMOS, L. B. 700 1 $aCAMPANHA, M. M. 773 $tGlobal Journal of Science Frontier Research$gv. 22, n. 2, p. 1-17, 2022.
Download
Esconder MarcMostrar Marc Completo |
Registro original: |
Embrapa Milho e Sorgo (CNPMS) |
|
Biblioteca |
ID |
Origem |
Tipo/Formato |
Classificação |
Cutter |
Registro |
Volume |
Status |
URL |
Voltar
|
|
Registro Completo
Biblioteca(s): |
Embrapa Florestas. |
Data corrente: |
14/03/2022 |
Data da última atualização: |
14/03/2022 |
Autoria: |
CARVALHO, P. E. R. |
Afiliação: |
PAULO ERNANI RAMALHO CARVALHO, CNPF. |
Título: |
Manduirana: Senna macranthera. |
Ano de publicação: |
2006 |
Fonte/Imprenta: |
In: CARVALHO, P. E. R. Espécies arbóreas brasileiras. Brasília, DF: Embrapa Informação Tecnológica; Colombo: Embrapa Florestas, 2006. |
Volume: |
v. 2. |
Páginas: |
p. 343-350. |
Série: |
(Coleção espécies arbóreas brasileiras, v. 2). |
Idioma: |
Português |
Conteúdo: |
NOMES VULGARES POR UNIDADES DA FEDERAÇÃO: canjoão e fedegoso-bravo, na Bahia; aleluia, amarelinho, caboclo, canafístula, cássia, chuva-de-ouro, fedegosão, fedegoso e paratudo, em Minas Gerais; manduirana, no Rio Grande do Sul; fedegoso, no Estado do Rio de Janeiro; cássia, fedegosão e manduirana, no Estado de São Paulo; cássia, em Sergipe. |
Palavras-Chave: |
Descrição; Manduirana; Ocorrência; Senna macranthera; Uso. |
Thesagro: |
Crescimento; Espécie Nativa; Madeira; Nomenclatura; Taxonomia. |
Categoria do assunto: |
K Ciência Florestal e Produtos de Origem Vegetal |
URL: |
https://ainfo.cnptia.embrapa.br/digital/bitstream/item/232483/1/Especies-Arboreas-Brasileiras-vol-2-Manduirana.pdf
|
Marc: |
LEADER 01133naa a2200265 a 4500 001 2140848 005 2022-03-14 008 2006 bl uuuu u00u1 u #d 100 1 $aCARVALHO, P. E. R. 245 $aManduirana$bSenna macranthera. 260 $c2006 300 $ap. 343-350. v. 2. 490 $a(Coleção espécies arbóreas brasileiras, v. 2).$vv. 2. 520 $aNOMES VULGARES POR UNIDADES DA FEDERAÇÃO: canjoão e fedegoso-bravo, na Bahia; aleluia, amarelinho, caboclo, canafístula, cássia, chuva-de-ouro, fedegosão, fedegoso e paratudo, em Minas Gerais; manduirana, no Rio Grande do Sul; fedegoso, no Estado do Rio de Janeiro; cássia, fedegosão e manduirana, no Estado de São Paulo; cássia, em Sergipe. 650 $aCrescimento 650 $aEspécie Nativa 650 $aMadeira 650 $aNomenclatura 650 $aTaxonomia 653 $aDescrição 653 $aManduirana 653 $aOcorrência 653 $aSenna macranthera 653 $aUso 773 $tIn: CARVALHO, P. E. R. Espécies arbóreas brasileiras. Brasília, DF: Embrapa Informação Tecnológica; Colombo: Embrapa Florestas, 2006.
Download
Esconder MarcMostrar Marc Completo |
Registro original: |
Embrapa Florestas (CNPF) |
|
Biblioteca |
ID |
Origem |
Tipo/Formato |
Classificação |
Cutter |
Registro |
Volume |
Status |
Fechar
|
Expressão de busca inválida. Verifique!!! |
|
|